In this tutorial, the Simulation dynamic pullout of a steel plate from the RC beam in Abaqus has been investigated. The steel plate is modeled as a three-dimensional solid part. The concrete beam is modeled as a three-dimensional solid part. The bars and strips are modeled as three-dimensional wire parts. ...
ادامه نوشته »شبیه سازی بیرون کشیدن ورق فولادی از تیر بتنی تقویت شده با میلگرد در آباکوس-بررسی آسیب
در این ویدئوی آموزشی به شبیه سازی بیرون کشیدن ورق فولادی از تیر بتنی تقویت شده با میلگرد در نرم افزار آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و ورق فولادی به صورت یک مدل سالید و سه بعدی، تیر بتنی به صورت سالید و سه بعدی ...
ادامه نوشته »Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus
In this tutorial, the Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus has been done. The concrete is modeled as three dimensional solid part. The TNT and steel sheet are modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The Eulerian ...
ادامه نوشته »Simulation pull-out process of the deformed steel bar from the concrete in Abaqus
In this tutorial, the Simulation pull-out process of the deformed steel bar from the concrete in Abaqus has been investigated. The goal of this simulation is the damage and failure zone analysis in the concrete slab. The concrete part is modeled as a three-dimensional solid part. The deformed steel bar ...
ادامه نوشته »Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus
In this tutorial, the Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus has been investigated. The ice is modeled as a three-dimensional solid part. The TNT, air, and water are modeled as three-dimensional Eulerian parts. Due to the extremely short reaction time of ...
ادامه نوشته »Simulation internal explosion inside the rock by using coupled Eulerian-Lagrangian method in Abaqus
In this tutorial, the Simulation internal explosion inside the rock by using the coupled Eulerian-Lagrangian method in Abaqus has been studied. The rock and TNT are modeled as three-dimensional solid parts. The Eulerian domain is modeled as a three-dimensional Eulerian part. You can see a figure of the assembled parts ...
ادامه نوشته »Simulation drilling hole process in concrete by using a rigid drill tool in Abaqus
In this tutorial, the Simulation drilling hole process in the Abaqus by using a rigid drill tool has been studied. Concrete drilling, or core drilling, is the process of drilling precise holes in concrete floors or walls, or in any other paved surfaces or structures. The concrete is modeled as a three-dimensional solid part. ...
ادامه نوشته »Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus
In this tutorial, Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus has been investigated. The ceramic and steel plates are modeled as a three-dimensional solid part. The aluminum core with honeycomb shape is modeled as a three-dimensional shell part. Three rigid bodies are used to define hydraulic ...
ادامه نوشته »Simulation sandstone cutting by using a rigid tool in Abaqus-Damage investigation
In this tutorial, the Simulation sandstone cutting by using a rigid tool in Abaqus-Damage investigation – has been studied. The stone part is modeled as a three-dimensional solid part. The tool is imported to the Abaqus as a deformable part, but in the interaction section, the rigid constraint has been ...
ادامه نوشته »Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus
In this tutorial, the Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus has been investigated. Blast incidents in recent years showed that most of the terrorist attacks on public structures were explosions within short standoff distance. Reinforced concrete (RC) structures are widely used in civil engineering for ...
ادامه نوشته »Simulation ice breaking by using brittle damage criterion in Abaqus
In this tutorial, the Simulation ice-breaking by using brittle damage criterion in Abaqus has been investigated. The ice part is modeled as a three-dimensional solid part and the steel part as a rough body is modeled as a three-dimensional solid part. You can see a figure of the assembled parts ...
ادامه نوشته »finite element analysis of smooth particle hydrodynamics for application to projectile impact on cementitious material
In this tutorial, finite element analysis of smooth particle hydrodynamics for application to projectile impact on cementitious material has been investigated. The performance of brittle, cementitious armor panels under high-rate impact is dependent on a wide range of variables including but not limited to projectile and target geometry, impact velocity, ...
ادامه نوشته »Finite element simulation of air blast explosion over the glass in Abaqus-Damage analysis
In this tutorial Finite element simulation of air blast explosion over the glass in Abaqus-Damage analysis- has been investigated.The glass and frame are modeled as a three dimensional part.You can see a figure of the assembled parts at below Elastic plastic material with Johnson-Cook damage criterion is used to model ...
ادامه نوشته »Dynamic analysis of tunnel in soil subjected to internal blast loading by using CEL method in Abaqus
In this tutorial Dynamic analysis of tunnel in soil subjected to internal blast loading by using CEL method in Abaqus has been investigated. The concrete tunnel is model as solid part,domain as a Eulerian part,TNT and soil as solid part and beam as wire part. You can see some figures ...
ادامه نوشته »Simulation Couple Eulerian Lagrangian explosion over RC column with steel beam core in Abaqus
In this tutorial Simulation Couple Eulerian Lagrangian explosion over RC column with steel beam core in Abaqus has been studied. The concrete column and steel beam are modeled as three dimensional part,the domain is modeled as eulerian part with TNT and the bars are modeled as three dimensional wire part ...
ادامه نوشته »Simulation low velocity impact on reinforced concrete beam in Abaqus-Damage investigation
In this tutorial Simulation low velocity impact on reinforced concrete beam in Abaqus-Damage investigation has been studied .Reinforced concrete (RC) structures have been widely used for centuries but the understanding of the impact behavior of these structures against impact loads is still limited. Several design codes based on an equivalent ...
ادامه نوشته »Simulation dynamic tensile test of a concrete piece in Abaqus
In this tutorial Simulation dynamic tensile test of a concrete piece in Abaqus has been studied. The concrete part is modeled as three dimensional part. Normally concrete damage plasticity is used to model compression and tensile damage on the concrete pieces, during static or dynamic analysis. In this tutorial dynamic ...
ادامه نوشته »Simulation profiled steel deck composite slab system under four point bending in Abaqus
In this tutorial simulation profiled steel deck composite slab system under four point bending in Abaqus has been studied. Composite slabs comprised of cold-formed profiled steel sheet and structural concrete topping are commonly used nowadays for the construction of buildings. In this system, steel deck serves as a permanent form ...
ادامه نوشته »Deformation behavior of multi-layered materials(silicon carbide,steel,aluminium,CFRP) under impact loading in Abaqus
The study of interaction between two impacting bodies, known as impact dynamics or terminal ballistics has many crucial applications. Bullet impact on armor, occupant and pedestrian safety during automobile accidents, tool drop on aircraft wing, are few examples where impact dynamics plays an important role. An in-depth understanding of deformation ...
ادامه نوشته »Blast simulation and damage investigate of insulated concrete sandwich panel in Abaqus
Insulated concrete sandwich panels are comprised of two outer concrete wythes and an inner layer of foam insulation. They have been increasingly used because of their advantages of light weight and energy efficiency. Various shear connectors can be used to connect the two outer concrete wythes. More recently, Fiber-Reinforced Polymer ...
ادامه نوشته »