تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: explosion

بایگانی برچسب: explosion

Simulation air blast load over a reinforced concrete beam with spiral GFRP bar in Abaqus

In this tutorial, the Simulation air blast load over a reinforced concrete beam with a spiral GFRP bar in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part, the spiral GFRP is a solid part also. The steel reinforcements are modeled as three-dimensional wire parts. ...

ادامه نوشته »

Simulation of a CEL large-scale bomb explosion(Nuclear detonation) near a building in Abaqus

In this tutorial, the Simulation of a CEL large-scale bomb explosion (Nuclear detonation) near a building in Abaqus has been investigated. A nuclear explosion releases vast amounts of energy in the form of blasts, heat, and radiation. An enormous Shockwave reaches speeds of many hundreds of kilometers an hour. The blast ...

ادامه نوشته »

Simulation Phantom aircraft collision on a concrete wall in Abaqus

In this tutorial, the Simulation Phantom aircraft collision with a concrete wall in Abaqus has been investigated. The concrete wall is modeled as a three-dimensional solid part. The Phantom is imported as an input geometry to Abaqus as a shell part. You can see a figure of the parts below ...

ادامه نوشته »

Simulation air blast analysis of a composite column(wood-concrete-CFRP) in Abaqus

In this tutorial, the Simulation air blast analysis of a composite column(wood-concrete-CFRP) in Abaqus has been investigated. The wood is modeled as a three-dimensional solid part with two layers of tension and compression. The concrete is modeled as a three-dimensional solid part. The steel bars and strips are modeled as ...

ادامه نوشته »

Simulation CEL explosion near a stone wall covered with cloth concrete in Abaqus

In this tutorial, the  Simulation CEL explosion near a stone wall covered with cloth, and concrete in Abaqus has been investigated. The stone wall and cloth, concrete are modeled as three-dimensional solid parts. The TNT is a solid sphere, and the Eulerian domain is a 3D body. You can see ...

ادامه نوشته »

Simulation CEL explosion inside the RC UHPC building in Abaqus-Damage investigation

In this tutorial, the Simulation CEL explosion inside the RC UHPC building in Abaqus-Damage investigation has been done The Ulta-High-Performance-Concrete(UPHC) building is modeled as a three-dimensional solid part. The reinforcements are modeled as wire part. The TNT is shpere part inside the Eulerian domain. You can see figures of the ...

ادامه نوشته »

Simulation compression test of a RC column with spiral CFRP with fully damaged behaviour in Abaqus

In this tutorial, the Simulation compression test of a RC column with spiral CFRP with fully damaged behaviour in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The spiral CFRP is modeled as a three-dimensional solid part. The steel bar is modeled as a ...

ادامه نوشته »

Simulation air blast explosion over RC column with spiral strip and steel tube cover in Abaqus

In this tutorial, the Simulation air blast explosion over RC column with spiral strip and steel tube cover in Abaqus has been done. The concrete column is modeled as a three-dimensional solid part. The spiral strips and bars are modeled as three-dimensional wire part. The steel tube as cover is ...

ادامه نوشته »

Simulation under water explosion shock over a cylindrical aluminum shell in interaction with soil in Abaqus

In this tutorial, the Simulation under water explosion shock over a cylindrical aluminum shell in interaction with soil in Abaqus has been studied. The water is modeled as a three-dimensional solid part with acoustic behaviour. The aluminum part is modeled as a three-dimensional shell part, and the soil as a ...

ادامه نوشته »

Air blast explosion over a rienforced concrete column with spiral CFRP strip in Abaqus

In this tutorial, the Air blast explosion over a rienforced concrete column with spiral CFRP strip in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The steel strips and bars are modeled as three-dimensional wire part. The spiral CFRP part is modeled as a ...

ادامه نوشته »

Simulation CEL explosion of steel-UHPC composite RC beam(column) with multiple encased steel profiles in Abaqus

In this tutorial, the Simulation CEL explosion of steel-UHPC composite RC beam(column) with multiple encased steel profiles in Abaqus  has been done. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire parts. The steel beam core and TNT part are modeled ...

ادامه نوشته »

َAir blast simulation of PEEK/ceramic/gelatin composite for finding behind the armor trauma in Abaqus

In this tutorial, the َAir blast simulation of PEEK/ceramic/gelatin composite for finding behind the armor trauma in Abaqus has been investigated. The polyether-ether-ketone(PEEK) is modeled as a thin solid layer to protect the other layers. The silicon carbide or ceramic is modeled as a three-dimensional solid layer at the middle. ...

ادامه نوشته »

Damage prediction of concrete gravity dams subjected to two underwater explosion shock loading

In this tutorial, the  simulation of Damage prediction of concrete gravity dams subjected to underwater explosion shock loading has been done. The concrete dam is modeled as a three-dimensional solid part. The TNT, water, and air are modeled as eulerian part. The rock foundation is modeled as a three-dimensional solid ...

ادامه نوشته »

Simulation air blast over a composite panel( Glass Epoxy-Ceramic-thermoplastic polyurethane) in Abaqus

In this tutorial, the Simulation air blast over a composite panel( Glass Epoxy-Ceramic-thermoplastic polyurethane) in Abaqus has been done. The epoxy glass composite part is modeled as a three-dimensional shell part with sixteen layers. The ceramic and polyurethane are modeled as three-dimensionalsolid part. You can see a figure of the ...

ادامه نوشته »

Simulation rocket impact and explosion over a concrete panel in Abaqus

In this tutorial the Simulation rocket impact and explosion over a concrete panel in Abaqus has been investigated. The concrete panel is modeled as a three-dimensional solid part. The rocket is modeled as a three-dimensional shell part, and the TNT is modeeld as a solid part. You can see a ...

ادامه نوشته »

Simulation air blast load over a composite panel(Aluminum+bamboo fiber) in Abaqus

In this tutorial, the Simulation air blast load over a composite panel(Aluminum+bamboo fiber) in Abaqus has been investigated. Because of the symmetry circumstance, one quarter of the geometries are modeled. The aluminum plates are modeled as three-dimensional solid part. The bamboo plate as a core of the composite panel is ...

ادامه نوشته »

Simulation air blast explosion over a steel-UHPC-steel sandwich composite beam stud connectors in Abaqus

In this tutorial, the Simulation air blast explosion over a steel-UHPC-steel sandwich composite beam stud connectors in Abaqus has been studied. The two steel plates with studs are modeled as three-dimensional solid part. The UHPC is modeled as a three-dimensional solid part as a core of the sandwich beam. You ...

ادامه نوشته »

Simulation air blast explosion over a timber wood beam reinforced with CFRP in Abaqus

In this tutorial, the Simulation air blast explosion over a timber wood beam reinforced with CFRP in Abaqus has been investigated. The two wood beam layers are modeled as three-dimensional solid parts. The CFRP sheet is modeled as a three dimensional shell part. You can see a figure of the ...

ادامه نوشته »

Simulation close explosion test of a glass shield in Abaqus

With the growing threat and risk of attacks and explosions in densely populated urban environments, the need for advanced security glass in windows, doors, police protective galss shield, and glass partitions is also increasing. In a powerful explosion, conventional glass panes will splinter even at a great distance from the ...

ادامه نوشته »

Simulation sequential CEL explosion in the depth of soil over the RC slab in Abaqus

In this tutorial, the Simulation sequential CEL explosion in the depth of soil over the RC slab in Abaqus has been investigated. The concrete slab is modeled as three-dimensional solid part, the steel reinforcement is modeled as wire part. The Soil, and TNT are modeled as three-dimensional solid parts. The ...

ادامه نوشته »

Simulation UHPFRC beam with initial void reinforced with CFRP rod and Expoxy under dynamic bending

In this tutorial, the Simulation UHPFRC beam with initial void reinforced with CFRP rod and Expoxy under dynamic bending has been investigated. The concrete beam, CFRP rod, epoxy glu are modeled as three-dimensional solid parts. Two rigid body as a hydraulic jacks also are modeled. You can see a figure ...

ادامه نوشته »

Simulation air blast explosion over the rubberized concrete column reinforced with green composite in Abaqus

In this tutorial, the Simulation air blast explosion over the rebberized concrete column reinforced with green composite in Abaqus has been done. The rubberized concrete column is modeled as a three-dimensional solid part. The green composite with some layers is modeled as a three-dimensional shell part. The steel reinforcements are ...

ادامه نوشته »

Explosion simulation near the reinforced concrete wall with green composite-SPH method

In this tutorial the explosion simulation near the reinforced concrete wall with green composite-SPH method- has been investigated. The TNT part is modeled as a three-dimensional solid part. The concrete wall or slab is modeled as three-dimensional solid part, the green composite part with eight layers is modeld as three-dimensional ...

ادامه نوشته »

Simulation CEL explosion inside the CFRP composite vessel in Abaqus

In this tutorial the Simulation CEL explosion inside the CFRP composite vessel in Abaqus has been investigated. The CFRP vessel is modeled as a three-dimensional shell part in sixteen layers with different oreintation. The TNT part is modeled as a three-dimensional solid part. The surounding is modeled as an Eurlerian ...

ادامه نوشته »

Simulation CFRP water storage tank under close air blast explosion in Abaqus

In this tutorial the Simulation CFRP water storage tank under close air blast explosion in Abaqus has been investigaed. The CFRP tank is modeled as a three-dimensional shell part. The water is modeled as solid part and it’ll used as reference volume in load section to define the amount and ...

ادامه نوشته »

شبیه سازی انفجار به روش اویلری در نزدیکی یک مخزن کامپوزیتی حاوی آب در آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار به روش اویلری در نزدیکی یک مخزن کامپوزیتی حاوی آب در آباکوس و بررسی آسیب مخزن پرداخته ایم. مخزن کامپوزیتی به صورت یک استوانه شل سه بعدی طراحی شده است. هندسه آب به صورت یک جسم سالید سه بعدی و همچنین فضای ...

ادامه نوشته »

Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation

In this tutorial, the Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation – has been done. The explosive part, or the TNT is modeled as a three-dimensional solid part. The aluminum sheets are modeled as three-dimensional solid parts. The Aluminum Foam as a core is ...

ادامه نوشته »

Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus

In this tutorial, the Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus has been investigated. The aluminum sheets are modeled as three-dimensional solid parts. The TPU is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below. History presents evidence of the ...

ادامه نوشته »

Simulation blast explosion over the composite panel(Steel-Aluminum-Ceramic-CFRP) in Abaqus

In this tutorial, the Simulation blast explosion over the composite panel(Steel-Aluminum-Ceramic-CFRP) in Abaqus has been investigated. The steel and aluminum plates are modeled as three-dimensional solid part. The silicon carbide or ceramic is modeled as a three-dimensional solid part. The CFRP is modeled as a three-dimensional solid part with four ...

ادامه نوشته »

Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus

In this tutorial, the Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus has been investigated. The Ultra-High-Performance-Fiber-Reinforced Concrete is modeled as a three-dimensional solid part. The stud is modeled as a three-dimensional solid part. The steel beam is modeled as a three-dimensional ...

ادامه نوشته »

Simulation air blast explosion over composite slab(UHPC-Steel) by using cohesive interaction in Abaqus

In this tutorial, the Simulation air blast explosion over campsite slab(UHPC-Steel) by using cohesive interaction in Abaqus  has been done. The two steel covers are modeled as three-dimensional solid part. The Ultra-High-Performance concrete is modeled as a three-dimensional solid par. You can see a figure of the assembled parts below ...

ادامه نوشته »

Simulation air blast explosion over a Wood-Concrete slab reinforced with BFRP lamina in Abaqus

In this tutorial, the Simulation air blast explosion over a Wood-Concrete slab reinforced with BFRP lamina in Abaqus  has been investigated. The wood-concrete part is modeled as a three-dimensional solid part. The Basalt Fiber Reinforced Plastic( BFRP) is model as a shell part with eight layers. The steel reinforcement which ...

ادامه نوشته »

Simulation air blast explosion over the RC beam reinforced with Banana-Epoxy lamina in Abaqus

In this tutorial, the Simulation air blast explosion over the RC beam reinforce with Banana-Epoxy lamina in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. The Banana-Epoxy part is modeled as a three-dimensional shell ...

ادامه نوشته »

Simulation air blast explosion over the UHPC slab reinforced with BFRP composite in Abaqus

In this tutorial, the Simulation air blast explosion over the UHPC slab reinforced with BFRP composite in Abaqus has been investigated. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The Basalt fiber reinforced plastic(BFRP) is modeled as a shell part with four layers. You can see a figure of ...

ادامه نوشته »

Simulation CEL explosion in the depth of soil near a solid steel pipe in Abaqus

In this tutorial, the Simulation CEL explosion in the depth of soil near a solid steel pipe in Abaqus  has been done. The Eulerian domain is modeled as a three-dimensional Eulerial part. The air, soil, and TNT are modeled as three-dimensional solid part. The steel pipe is model as a ...

ادامه نوشته »

Simulation air blast explosion over the composite RC slab( UHPC and NSC) in Abaqus

In this tutorial, the Simulation air blast explosion over the composite RC slab( UHPC and NSC) in Abaqus has been investigated. the Ultra High Performance Concrete(UHPC) and Normal Strength Concrete(NSC) are modeled as three-dimensional solid part. The UHPC is the upper face and the NSC is the bottom part. The ...

ادامه نوشته »

Numerical simulation on damage mechanics behavior of a pipeline under internal explosion in Abaqus

In this tutorial, the Numerical simulation on damage mechanics behavior of a pipeline under internal explosion in Abaqus  has been investigated. The steel pipe is modeled as a three-dimensional shell part. The soil is modeled as a three-dimensional solid part. Half of the steel pipe is placed inside the soil. ...

ادامه نوشته »

Simulation SPH explosion near RC slab by using CDP model couple with strain rate in Abaqus

In this tutorial, the Simulation SPH explosion near RC slab by using CDP model couple with strain rate in Abaqus  has been investigated. The RC slab is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The TNT is modeled as a three-dimensional solid ...

ادامه نوشته »

Simulation damage of reinforced concrete slab subjected to underwater explosion by using CEL method in Abaqus

In this tutorial, the Simulation damage of reinforced concrete slab subjected to underwater explosion by using CEL method in Abaqus  has been studied. The Eulerian part contains TNT, air, and water is modeled as a three-dimensional Eulerian part. The concrete slab is modeled as a three-dimensional solid part. The steel ...

ادامه نوشته »

Simulation internal explosion by using SPH method in Abaqus

In this tutorial, the Simulation internal explosion by using SPH method in Abaqus has been investigated. The outer part is modeled as a three-dimensional solid part and the explosive part is modeled as a three-dimensional solid part. The TNT is placed inside the the outer shell part and during the ...

ادامه نوشته »

Simulation CEL explosion in the depth of soil near the concrete piled-raft structure in Abaqus

In this tutorial, the Simulation CEL explosion in the depth of soil near the concrete pilled-raft structure in Abaqus  has been studied. The domain is modeled as three-dimensional Eulerian part. The concrete pilled-raft is modeled as three-dimensional solid part. The air, TNT, and soil are modeled as three-dimensional solid parts. ...

ادامه نوشته »

Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus

In this tutorial, the Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus has been investigated. The two ceramic layers are modeled as three-dimensional solid part. The aluminum foam as a middle part is modeled as a three-dimensional solid part. You can see a figure of ...

ادامه نوشته »

شبیه سازی انفجار متوالی روی یک پنل کامپوزیتی( سرامیک-فوم آلمینیومی) در نرم افزار آباکوس

در این ویدئو به شبیه سازی انفجار متوالی روی یک پنل کامپوزیتی( سرامیک-فوم آلمینیومی) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو لایه سرامیک به صورت سالید و یک لایه فوم آلمینیومی ضخیم در میان آنها به صورت سالید می باشد. در این ...

ادامه نوشته »

simulation air blast explosion over the composite panel(glass+PVB) in Abaqus

In this tutorial, the simulation air blast explosion over the composite panel(glass+PVB) in Abaqus has been investigated. Explosions in air create characteristic pressure-time signatures that propagate outwards. Upon impact of the pressure waves with annealed glass, sharp glass fragments are formed which can cause injuries. With blast loading threats, laminated ...

ادامه نوشته »

Simulation SPH explosion inside the RC column with outer steel box cover in Abaqus

In this tutorial, the Simulation SPH explosion inside the RC column with outer steel box cover in Abaqus has been investigated. The concrete and TNT are modeled as three-dimensional solid parts. The steel box is modeled as a three-dimensional shell part. The steel bars and strips are modeled as three-dimensional ...

ادامه نوشته »

Simulation CEL explosion over composite panel(Steel and Aluminum Foam) in Abaqus

In this tutorial, the Simulation CEL explosion over composite panel(Steel and Aluminum Foam) in Abaqus  has been studied. The steel sheets and aluminum foam core are modeled as three-dimensional solid parts. The TNT part is modeled as a three-dimensional solid part. The domain is modeled as a three-dimensional Eulerian part. ...

ادامه نوشته »

Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus

In this tutorial, the Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus has been done. The concrete is modeled as three dimensional solid part. The TNT and steel sheet are modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The Eulerian ...

ادامه نوشته »

Simulation sequential air blast explosion over the concrete slab reinforced with CFRP sheet in Abaqus

In this tutorial, the Simulation sequential air blast explosion over the concrete slab reinforced with CFRP sheet in Abaqus has been studied. The concrete slab is modeled as a three-dimensional solid part. The CFRP sheet is modeled as a three-dimensional shell part. You can see figures of the assembled parts ...

ادامه نوشته »

شبیه سازی انفجار در هوا به صورت پی در پی روی یک دال بتنی تقویت شده با CFRP در آباکوس

در این ویدئو به شبیه سازی انفجار در هوا به صورت پی در پی روی یک دال بتنی تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. منظور از مدلسازی به صورت پی در پی در واقع انتقال نتایج آنالیز اولیه به آنالیز دوم و آنالیز دوم به آنالیز ...

ادامه نوشته »

Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus

In this tutorial, the Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus has been investigated. The ice is modeled as a three-dimensional solid part. The TNT, air, and water are modeled as three-dimensional Eulerian parts. Due to the extremely short reaction time of ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo