تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / اخبار تایپ شونده / Dynamic bending simulation of a UHPC beam reinforced with GFRP bars in Abaqus

Dynamic bending simulation of a UHPC beam reinforced with GFRP bars in Abaqus

In this tutorial, the Dynamic bending simulation of a UHPC beam reinforced with GFRP bars in Abaqus has been investigated. The Uktra-High-Performance concrete  beam is modeled as a three-dimensional solid part. The cohesive layer as an interface between UHPC and GFRP bar is modeled as a three-dimensional solid part. The GFRP is modeled as a three-dimensional solid part and the two rigid parts have been used to apply the load. You can see a figure of the assembled parts below

To model UHPC material, Concrete Damaged Plasticity model is used. This hardening model is used both compression and tension data to simulation the UHPC behavior under dynamic bending load. To model cohesive layer, the elastic data type traction and also traction-separation law to consider failure is used. To model GFRP behavior the elastic data as an engineering constant is selected. The dynamic explicit step us appropriate for this type of analysis because of the large deformation and separation that happens during the bending between the UHPC and the GFRP bars. The general contact algorithm with friction as a contact property is selected to consider all contacts. The perfect or ideal contact is applied to the surface of the concrete and cohesive layer, GFRP and cohesive layer. The fixed boundary condition is assigned to the two bottom surfaces of the beam and displacement with amplitude to the two top rigid bodies. The mesh be fine to achieve the good results

After the simulation all results such as stress, strain, plastic strain, displacement, force-displacement diagram, and … are available. You can see some figures for the results below

You can provide CAE ,INP,and English video files of this simulation here. The cost of these files is Thirty US Dollars. you can click on the bellow bottom to beginning process

This is an important point when you want to select the payment port, select ROD PAY(this is a payment port for foreign buyers) and you can pay just with Bitcoins

If you haven’t Bitcoins You can pay it with PayPal or Master card just send me an email to this address:karampourp@gmail.com

درباره ی Abaqus

همچنین ببینید

Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus

In this tutorial, the Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion ...

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.