تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / 2020 / فوریه

بایگانی ماهانه: فوریه 2020

Simulation pull-out process of the deformed steel bar from the concrete in Abaqus

In this tutorial, the Simulation pull-out process of the deformed steel bar from the concrete in Abaqus has been investigated. The goal of this simulation is the damage and failure zone analysis in the concrete slab. The concrete part is modeled as a three-dimensional solid part. The deformed steel bar ...

ادامه نوشته »

شبیه سازی بیرون کشیدن میلگرد از بتن به صورت دینامیکی در نرم افزار آباکوس-بررسی تخریب بتن

در این ویدئوی آموزشی به شبیه سازی بیرون کشیدن میلگرد از بتن به صورت دینامیکی در نرم افزار آباکوس-بررسی تخریب بتن- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت بتن به صورت سالید و سه بعدی طراحی شده است. به دلیل پیچیدگی هندسه میلگرد آج دار، هندسه مربوط ...

ادامه نوشته »

Simulation fire analysis of the concrete beam in the Abaqus- Temperature and Stress analysis

In this tutorial, the Simulation fire analysis of the concrete beam in the Abaqus-Temperature and Stress analysis- has been studied. Owing to the low thermal conductivity of concrete, the concrete cover acts as fire insulation to reinforcing bars in reinforced concrete (RC) elements. In real fire incidents, concrete buildings generally ...

ادامه نوشته »

شبیه سازی آتش سوزی روی یک تیر بتنی با متریال مدل CDP در آباکوس- بررسی تبدیل حرارت به تنش

در این ویدئوی آموزشی به شبیه سازی آتش سوزی روی یک تیر بتنی با متریال مدل CDP در نرم افزار آباکوس- بررسی تبدیل حرارت به تنش- پرداخته ایم.مدلسازی به صورت سه بعدی بوده و در آن از یک تیر بتنی به صورت سه بعدی و سالید استفاده شده است. در ...

ادامه نوشته »

Simulation four-point bending of the UHPC slab reinforced with steel bars and GFRP sheet in Abaqus

In this tutorial, the Simulation four-point bending of the UHPC slab reinforced with steel bars and the GFRP sheet in Abaqus has been investigated. The UHP concrete slab is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. The GFRP sheet with eight layers ...

ادامه نوشته »

شبیه سازی خمش چهار محوره دال بتنی فوق توانمند تقویت شده با میلگرد و ورق GFRP در آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش چهار محوره دال بتنی فوق توانمند تقویت شده با میلگرد و ورق GFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و دال بتنی فوق توانمند به صورت یک پارت سه بعدی و سالید، میلگردها به صورت یک ...

ادامه نوشته »

Simulation sequential air blast explosion over the concrete slab reinforced with CFRP sheet in Abaqus

In this tutorial, the Simulation sequential air blast explosion over the concrete slab reinforced with CFRP sheet in Abaqus has been studied. The concrete slab is modeled as a three-dimensional solid part. The CFRP sheet is modeled as a three-dimensional shell part. You can see figures of the assembled parts ...

ادامه نوشته »

شبیه سازی انفجار در هوا به صورت پی در پی روی یک دال بتنی تقویت شده با CFRP در آباکوس

در این ویدئو به شبیه سازی انفجار در هوا به صورت پی در پی روی یک دال بتنی تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. منظور از مدلسازی به صورت پی در پی در واقع انتقال نتایج آنالیز اولیه به آنالیز دوم و آنالیز دوم به آنالیز ...

ادامه نوشته »

Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus

In this tutorial, the Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The CFRP box is modeled as a three-dimensional shell part. In the first simulation of the ...

ادامه نوشته »

شبیه سازی ستون بتنی با آسیب و تنش پسماند اولیه تحت بار محوری،تقویت شده با CFRP در آباکوس

در این ویدئوی آموزشی به شبیه سازی ستون بتنی با آسیب و تنش پسماند اولیه تحت بار محوری،تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و ستون بتنی به صورت سه بعدی و سالید و صفحات کامپوزیتی نیز به صورت شل سه ...

ادامه نوشته »

Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus

In this tutorial, the Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The CFRP sheet is model as a three-dimensional shell part. In this tutorial, at the first ...

ادامه نوشته »

شبیه سازی تقویت تیر بتنی با آسیب و تنش پسماند اولیه با ورق CFRP تحت خمش چهار نقطه ای در آباکوس

در این ویدئوی آموزشی به شبیه سازی تقویت تیر بتنی با آسیب و تنش پسماند اولیه با ورق CFRP تحت خمش چهار نقطه ای در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو پارت تیر بتنی به صورت سه بعدی و سالید و پارت ...

ادامه نوشته »

Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus

In this tutorial, the Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus has been investigated. The ice is modeled as a three-dimensional solid part. The TNT, air, and water are modeled as three-dimensional Eulerian parts. Due to the extremely short reaction time of ...

ادامه نوشته »

شبیه سازی انفجار زیر آب در نزدیکی لایه یخ به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب در نزدیکی لایه یخ به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و در این تحلیل یخ به صورت مدل سالید و سه بعدی، تی ان تی، هوا و آب نیز به ...

ادامه نوشته »

Simulation internal explosion inside the rock by using coupled Eulerian-Lagrangian method in Abaqus

In this tutorial, the Simulation internal explosion inside the rock by using the coupled Eulerian-Lagrangian method in Abaqus has been studied. The rock and TNT are modeled as three-dimensional solid parts. The Eulerian domain is modeled as a three-dimensional Eulerian part. You can see a figure of the assembled parts ...

ادامه نوشته »

شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی درون یک قطعه سنگ در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی درون یک قطعه سنگ در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل سه هندسه می باشد که پارت سنگ به صورت سه بعدی و تغییر شکلپذیر، بارت تی ان تی به صورت سه بعدی و تغییر شکلپذیر و ...

ادامه نوشته »

Simulation drilling hole process in concrete by using a rigid drill tool in Abaqus

In this tutorial, the Simulation drilling hole process in the Abaqus by using a rigid drill tool has been studied.  Concrete drilling, or core drilling, is the process of drilling precise holes in concrete floors or walls, or in any other paved surfaces or structures. The concrete is modeled as a three-dimensional solid part. ...

ادامه نوشته »

شبیه سازی سوراخ کاری بتن با استفاده از مته در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی سوراخ کاری بتن با استفاده از مته در نرم افزار آباکوس پرداخته ایم. بتن به صورت یک پارت سه بعدی و سالید در نظر گرفته شده است. پارت مته به دلیل پیچیدگی هندسه نیاز به طراحی در نرم افزاری مانند سالیدورک دارد، لذا ...

ادامه نوشته »

Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus

In this tutorial, Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus has been investigated. The ceramic and steel plates are modeled as a three-dimensional solid part. The aluminum core with honeycomb shape is modeled as a three-dimensional shell part. Three rigid bodies are used to define hydraulic ...

ادامه نوشته »

شبیه سازی دینامیکی خمش سه نقطه ای پنل مرکب (سرامیک-فولاد-آلمینیوم) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی دینامیکی خمش سه نقطه ای پنل مرکب(سرامیک-فولاد-آلمینیوم) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که مجموعه متشکل از یک صفحه سرامیکی، دولایه ورق فولادی و یک هسته مشبک آلمینیومی می باشد که این مجموعه تحت خمش توسط اجزای ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo