بایگانی برچسب: hashin’s damage

Introduction to Simulation of Blast Resistance Behavior of Adhesively Bonded Cross-Laminated Timber-Concrete Composite (CLT-CC) Overview The simulation of blast resistance behavior in adhesively bonded cross-laminated timber-concrete composites (CLT-CC) represents an emerging area of research in structural engineering and blast mitigation. This composite system combines the advantages of cross-laminated timber (CLT) ...

Introduction to Bullet Ballistic Impact on Hybrid Fiber-Reinforced Concrete (HFRC) Reinforced with CFRP Sheets Background Hybrid Fiber-Reinforced Concrete (HFRC) combines different types of fibers (e.g., steel, polypropylene, basalt, or glass) to enhance mechanical properties such as tensile strength, ductility, and impact resistance. When further reinforced with Carbon Fiber-Reinforced Polymer (CFRP) ...

Introduction to Numerical Study on CFRP-Lined Concrete Cylinder Pipe (CCP) Under Internal Explosion Concrete Cylinder Pipes (CCPs) are widely used in water transmission systems due to their high load-bearing capacity and durability. However, they are vulnerable to internal explosions caused by accidental gas ignition or deliberate attacks, leading to catastrophic ...

Introduction to Wood Simulation and Analysis in Abaqus Wood is a complex, anisotropic material with unique mechanical properties that vary depending on grain orientation, moisture content, and other factors. Simulating and analyzing wood behavior in engineering applications requires specialized tools and methodologies. Abaqus, a powerful finite element analysis (FEA) software, ...

In this tutorial, the Simulation composite Pipe(Aluminum-Bamboo fiber-Aluminum) under internal blast in Abaqus has been investigated. All three pipes are modeled as shell parts. You can see a figure of the assembled parts below The configuration of a composite pipe, which combines the advantages of joining two thin, stiff, and ...

In this tutorial, the crushing analysis of a foam-filled aluminum/CFRP hybrid tube against transverse impact in Abaqus was done. The aluminum tube, CFRP, and aluminum foam are modeled as three-dimensional parts. You can see a figure of the assembled parts below Thin-walled structures made of conventional metals, such as aluminum ...

This tutorial investigates the Simulation of Shearing and bending Capacity of Concrete Beams Reinforced with Carbon Fiber Truss in Abaqus. The Ultra-High-Performance-Concrete beam is modeled as a three-dimensional solid part. The bar and strips are modeled as wire parts. The CFRP composite is modeled as a truss-shaped shell with eight ...

Finite Element Analysis on the Mechanical Performance of the Middle Long CFST Column with an Inner I-shaped CFRP Profile under Axial Loading has been done in this tutorial. The steel box is modeled as a shell part. The inner concrete is modeled as a three-dimensional solid part. The CFRP I-shape ...

Simulation SPH explosion over a composite column(Steel cover+Concrete+CFRP I shape beam) in Abaqus has been investigated in the present tutorial. The steel cover and CFRP I shape beam are modeled as three-dimensional shell parts. The concrete and TNT are modeled as three-dimensional solid parts. You can see a figure of ...

In this tutorial, the Simulation high-velocity impact on the Aluminum-Bamboo sandwich panel in Abaqus has been done. The aluminum plate is modeled as a three-dimensional solid part. The bamboo plate is modeled as a shell part with thirty two layers with different fiber angle. The projectile is modeled as a ...

In this tutorial the Simulation ballistic impact of steel bullet to the ceramic panel reinfroced with Green Composite has been investigated. The bullet is modeled as a three-dimensional solid part, the ceramic panel as a solid part, and the green composite as a three-dimensional shell part. You can see a ...

In this Tutorial Simulation rigid body impact to concrete wall reinforced with composite plate by using SPH method in Abaqus has been investigated. All parts are modeled as three dimensional and to definite concrete behavior CDP material model with SPH formulation has been used. Composite made of Epoxy-Glass layers modeled by ...

core sandwich structures are fabricated with Epoxy-Glass fiber reinforced  face sheets and aluminum alloy cores.This lightweight design concept enables sandwich structures to maximize their specific bending stiffness/strength and improve their energy absorption capability. To model composite behavior under impact Hashin’s damage criterion has been used.Explicit procedure is appropriate for this ...

In this video air blast explosion over a sandwich panel made of Aluminium and Epoxy Glass layers has been simulated. For modeling blast effect CONWEP procedure is appropriate . Aluminium is modeled as three dimensional part and for modeling it’s behavior under blast load ductile damage with Johnson-Cook plasticity and ...

In this video rigid impact to the sandwich panel made of Aluminium and Epoxy-Glass layers has been investigated. All parts are modeled as three dimensional. To model aluminium behavior under the impact Johnson-Cook plasticity with Ductile Damage and for composite Elastic and Hashin’s Damage has been used.To create a better ...