بایگانی برچسب: abaqus conwep air blast simulation

In this tutorial, the Simulation air blast analysis of a composite column(wood-concrete-CFRP) in Abaqus has been investigated. The wood is modeled as a three-dimensional solid part with two layers of tension and compression. The concrete is modeled as a three-dimensional solid part. The steel bars and strips are modeled as ...

In this tutorial, the Simulation air blast load over a RC beam reinforced with Cloth Concrete cover in Abaqus has been done, The normal concrete core is modeled as a three-dimensional solid part. The cloth concrete part is modeled as a three-dimensional patrt. The steel bar and strips are modeled ...

In this tutorial, the Air blast explosion over a rienforced concrete column with spiral CFRP strip in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The steel strips and bars are modeled as three-dimensional wire part. The spiral CFRP part is modeled as a ...

In this tutorial, the َAir blast simulation of PEEK/ceramic/gelatin composite for finding behind the armor trauma in Abaqus has been investigated. The polyether-ether-ketone(PEEK) is modeled as a thin solid layer to protect the other layers. The silicon carbide or ceramic is modeled as a three-dimensional solid layer at the middle. ...

In this tutorial, the Simulation air blast load over a composite panel(Aluminum+bamboo fiber) in Abaqus has been investigated. Because of the symmetry circumstance, one quarter of the geometries are modeled. The aluminum plates are modeled as three-dimensional solid part. The bamboo plate as a core of the composite panel is ...

In this tutorial, the Simulation air blast explosion over the rebberized concrete column reinforced with green composite in Abaqus has been done. The rubberized concrete column is modeled as a three-dimensional solid part. The green composite with some layers is modeled as a three-dimensional shell part. The steel reinforcements are ...

In this tutorial the Simulation CFRP water storage tank under close air blast explosion in Abaqus has been investigaed. The CFRP tank is modeled as a three-dimensional shell part. The water is modeled as solid part and it’ll used as reference volume in load section to define the amount and ...

In this tutorial the Simulation internal explosion of a pipe with steel supporters in Abaqus has been investigated. The steel pipe is modeled as three-dimensional solid part, it can also be shell part. The upper and bottom supports are modeled as three-dimensional solid part. You can see a figure of ...

This tutorial investigates a Simulation air blast explosion test over a reinforced UHPC- Damage analysis. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part. The embedded bars and strips parts are modeled as a three-dimensional wire part. You can see a figure of the assembled parts below The UHPC ...

In this course, we explained the Coupled Eulerian-Lagrangian, Smooth Particle Hydrodynamic, Acoustic, and CONWEP blast procedure in detail during twenty-three separate tutorials which you can see their title below. We provide this course because some people use our tutorials to create courses on Udemy but if you ask them questions ...

In this tutorial, the Simulation air blast explosion over a Wood-Concrete slab reinforced with BFRP lamina in Abaqus  has been investigated. The wood-concrete part is modeled as a three-dimensional solid part. The Basalt Fiber Reinforced Plastic( BFRP) is model as a shell part with eight layers. The steel reinforcement which ...

In this tutorial, the Simulation air blast explosion over the RC beam reinforce with Banana-Epoxy lamina in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. The Banana-Epoxy part is modeled as a three-dimensional shell ...

In this tutorial, the Simulation air blast explosion over the UHPC slab reinforced with BFRP composite in Abaqus has been investigated. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The Basalt fiber reinforced plastic(BFRP) is modeled as a shell part with four layers. You can see a figure of ...

In this tutorial, the Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus has been investigated. The two ceramic layers are modeled as three-dimensional solid part. The aluminum foam as a middle part is modeled as a three-dimensional solid part. You can see a figure of ...

In this tutorial, the Simulation air blast explosion over reinforced concrete column(ash and eggshell instead of cement partially) in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. You can see a figure of the ...

In this tutorial, the Simulation internal explosion inside the aluminum pipe reinforced with epoxy glue and steel cover in Abaqus has been studied. The aluminum, epoxy, and steel cover are modeled as three-dimensional solid parts. You can see a figure of the assembled parts below The aluminum material is used ...

In this tutorial, the Simulation air blast explosion over the composite panel(Concrete+Titanium foam) in Abaqus has been investigated. The concrete and titanium foam part is modeled as three-dimensional solid parts. The metal foam is used as an energy absorber. You can see a figure of the assembled parts below To ...

In this tutorial, the Simulation blast explosion over the composite column in Abaqus- Damage investigation – has been studied. The model contains three deformable parts. The outer steel box as a cover is modeled as a three-dimensional shell, the middle concrete is modeled as a three-dimensional solid part and the ...

In this tutorial Simulation rigid body rotation model for predicting a response of soil-filled wall subjected to blast in Abaqus has been done.Steel tank is modeled as a three dimensional shell part,domain is modeled as Eulerian part and soil as a solid part inside the domain. You can see a ...

In this tutorial Finite element simulation of air blast explosion over the glass in Abaqus-Damage analysis- has been investigated.The glass and frame are modeled as a three dimensional part.You can see a figure of the assembled parts at below Elastic plastic material with Johnson-Cook damage criterion is used to model ...