آموزش آباکوس از مقدماتی تا پیشرفته/شبیه سازی در آباکوس/فیلم های آموزشی آباکوس آموزش آباکوس/ مقدماتی تا پیشرفته/شبیه سازی پدیده های مختلف در آباکوس/دانلود ویدئوهای آموزشی آباکوس
In this tutorial, the Simulation rigid impact to the composite panel(CFRP+TPU+AL) in Abaqus-Damage investigation – has been studied. The CFRP part is modeled as a shell part with eight layers. The Thermoplastic polyurethane is modeled as a three-dimensional solid part. The Aluminum part is modeled as a three-dimensional solid part. The projectile is modeled as the rigid shell part. Because of the symmetry, one-quarter of the model is used. You can see a figure of the assembled parts below
To model CFRP behavior under the rigid impact, elastic property with Hashin’s damage criterion is selected. Damage initiation refers to the onset of degradation at a material point. In Abaqus, the damage initiation criteria for fiber-reinforced composites are based on Hashin’s theory. These criteria consider four different damage initiation mechanisms: fiber tension, fiber compression, matrix tension, and matrix compression. To model aluminum behavior, elastic data with Johnson-Cook hardening and damage is used. Abaqus/Explicit provides a dynamic failure model specifically for the Johnson-Cook plasticity model, which is suitable only for high-strain-rate deformation of metals. To model TPU behavior, the elastic-plastic material model with ductile damage criterion is selected
The dynamic explicit step is appropriate for this type of analysis. The perfect contact is assumed between TPU-AL and TPU-CFRP surfaces. The general contact with contact property is considered between the rigid body and other parts. The fixed boundary condition is assigned to the outer edges and the symmetry boundaries to the symmetry zones. The mesh should be fine to obtain the correct results
After the simulation, all results such as stress, strain, CFRP damage, aluminum damage, TPU failure, …are available. You can see some figures for the results below
You can provide CAE, INP, and English video files of this simulation here. The cost of these files is Twenty-Six Euros. you can click on the bellow bottom to beginning the process
You can purchase the tutorial through a PayPal account, a Visa, or a Master card, just before payment, send me an email to this address: karampourp@gmail.com
