In this tutorial, the Simulation concrete beam under static and dynamic bending in Abaqus has been done. The concrete beam is modeled as a three- dimensional solid part and five rigid parts as forces and supporters bodies are used. You can see a figures of the assembled parts at below ...
ادامه نوشته »بایگانی ماهانه: سپتامبر 2019
شبیه سازی تست خمش یک تیر بتنی در دو حالت بارگذاری استاتیکی و دینامیکی در آباکوس
در این ویدئوی آموزشی به شبیه سازی تست خمش یک تیر بتنی در دو حالت بارگذاری استاتیکی و دینامیکی در نرم افزار آباکوس پرداخته ایم.مجموعه شامل یک قطعه تیر بتنی که به صورت سه بعدی و تغییر شکلپذیر و پنج قطعه صلب بوده که سه پارت صلب در نقش تکیه ...
ادامه نوشته »Simulation flexural response of aluminium alloy profile in Abaqus- Damage investigation
In this tutorial, the Simulation flexural response of aluminum alloy profile in Abaqus- Damage investigation- has been studied. Aluminum alloys are used across a range of structural engineering applications, with square and rectangular hollow sections being a popular cross-section shape. This can be particularly beneficial for enhancing resistance to local ...
ادامه نوشته »شبیه سازی تست خمش دینامیکی پروفیل آلمینیومی در نرم افزار آباکوس-بررسی پارامتر آسیب
در این ویدئو آموزشی به شبیه سازی تست خمش دینامیکی پروفیل آلمینیومی در نرم افزار آباکوس-بررسی پارامتر آسیب- پرداخته ایم. مدل سازی به صورت سه بعدی بوده و پروفیل آلمینیومی به صورت یک پارت شل سه بعدی و اجسام صلب در نقش جسم وارد کننده نیرو و همچنین تکیه گاه ...
ادامه نوشته »numerical simulation of an aluminium-concrete beam in Abaqus
In this tutorial, An numerical simulation of an aluminum-concrete beam in Abaqus has been investigated. Contemporary designers should look for new solutions supporting sustainable construction. Aluminium-concrete composite structures have a lot of applications thanks to the corrosion-resistance and lightness of the aluminum beam. They may be used in composite bridges[4,5,6,7] ...
ادامه نوشته »شبیه سازی تست خمش سه نقطه ای تیر آلمینیومی-بتنی در نرم افزار آباکوس
در این ویدئوی آموزشی به شبیه سازی تست خمش سه نقطه ای تیر آلمینیومی-بتنی در نرم افزار آباکوس پرداخته ایم. مدل شامل چهار پارت می باشد. تیر به صورت سه بعدی و شل، پیچ ها به صورت سه بعدی و سالید، بتن به سه صورت سه بعدی و سالید و ...
ادامه نوشته »Simulation CEL explosion over the glass panel and damage investigation in Abaqus
In this tutorial, the Simulation CEL explosion over the glass panel and damage investigation in Abaqus has been done. The glass, air, and TNT are modeled as three-dimensional parts. The Eulerian domain is modeled as a three-dimensional Eulerian part. You can see a figure of the assembled parts at below ...
ادامه نوشته »شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی در نزدیکی یک پنل شیشه ای در آباکوس
در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی در نزدیکی یک پنل شیشه ای در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که در آن پارت شیشه،تی ان تی و هوا به صورت سه بعدی طراحی شده اند. فضای اویلری نیز به ...
ادامه نوشته »Simulation of Proposed Concrete Filled Steel Tube Connections under Reversed Cyclic Loading in Abaqus
In this tutorial, the Simulation of Proposed Concrete Filled Steel Tube Connections under Reversed Cyclic Loading in Abaqus has been studied. Composite steel-concrete structures are used in civil engineering projects worldwide. In recent decades, concrete-filled steel tube (CFT) structures have become accepted and used in buildings that they can provide ...
ادامه نوشته »شبیه سازی بارگذاری سیکلی روی یک ستون فلزی متصل به دو تیر پرشده با بتن در نرم افزار آباکوس
در این ویدئوی آموزشی به شبیه سازی بارگذاری سیکلی روی یک ستون فلزی متصل به دو تیر پرشده با بتن در نرم افزار آباکوس پرداخته ایم. مدل سازی به صورت سه بعدی بوده و ستون و تیرهای فلزی در طرفین به صورت پارت شل و هندسه بتن در قالب هسته ...
ادامه نوشته »Simulation cold spray process of ceramic particles impact on the titanium target in Abaqus
In this tutorial, the Simulation cold spray process of ceramic particles’ impact on the titanium target in Abaqus has been studied. The ceramic impactor is modeled as a three-dimensional sphere part with a forty-micrometer radius. and this is the minimum size of the sphere radius in Abaqus. The titanium target ...
ادامه نوشته »شبیه سازی فرآیند برخورد یا پاشش سرد ذرات سرامیک به تیتانیوم در نرم افزار آباکوس-ابعاد میکرومتر
در این ویدئوی آموزشی به شبیه سازی فرآیند برخورد یا پاشش سرد ذرات سرامیک به سطح تیتانیوم در نرم افزار آباکوس-ابعاد میکرومتر- پرداخته ایم. مدل سازی به صورت سه بعدی بوده و ذره سرامیک به صورت یک جسم کروی تغییر شکل پذیر با شعاع ۴۰ میکرومتر که کمترین مقدار قابل ...
ادامه نوشته »Simulation Bending behavior of aluminum foam-filled double cylindrical tubes in Abaqus
In this tutorial, Simulation Bending behavior of aluminum foam-filled double cylindrical tubes in Abaqus has been studied. During the past two decades, many research works have been done to study the axial crushing behavior of thin-walled columns, which work as energy absorption members, in order to improve their capacity. On ...
ادامه نوشته »شبیه سازی تست خمش لوله آلمینیومی دو لایه پر شده با فوم در نرم افزار آباکوس
در این ویدئوی آموزشی به شبیه سازی تست خمش لوله آلمینیومی دو لایه پر شده با فوم در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و لوله های آلمینیومی بیرونی و داخلی به صورت شل و ماده فومی هسته به صورت سالید مدل شده اند. اجزای ...
ادامه نوشته »finite element analysis of smooth particle hydrodynamics for application to projectile impact on cementitious material
In this tutorial, finite element analysis of smooth particle hydrodynamics for application to projectile impact on cementitious material has been investigated. The performance of brittle, cementitious armor panels under high-rate impact is dependent on a wide range of variables including but not limited to projectile and target geometry, impact velocity, ...
ادامه نوشته »شبیه سازی برخورد پرتابه سرعت بالا به پنل بتنی به روش اس پی اچ در آباکوس- بررسی ترم آسیب
در این ویدئوی آموزشی به شبیه سازی برخورد پرتابه سرعت بالا به پنل بتنی به روش اس پی اچ در نرم افزار آباکوس- بررسی ترم آسیب- پرداخته ایم. پنل بتنی و پرتابه فولادی به صورت سه بعدی و تغییر شکلپذیر ترسیم شده اند. در شکل زیر می توانید نحوه قرارگیری ...
ادامه نوشته »Flexural Behavior of Concrete Filled Square Steel Tube with Inner CFRP Circular Tube in Abaqus
In this tutorial, Flexural Behavior of Concrete Filled Square Steel Tube with Inner CFRP Circular Tube in Abaqus has been studied. Owing to the development of concrete technology and the demand of practical engineering, high strength concrete has been widely used in construction. The weakness of high strength concrete is ...
ادامه نوشته »شبیه سازی تست خمش سه نقطه ای قوطی فولادی پر شده با بتن به همراه لوله میانی کامپوزیتی CFRP در آباکوس
در این ویدئوی آموزشی به شبیه سازی تست خمش سه نقطه ای قوطی فولادی پر شده با بتن به همراه لوله میانی کامپوزیتی CFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و قوطی فولادی بیرونی به همراه لوله کامپوزیتی داخلی با استفاه از پارت شل، ...
ادامه نوشته »Simulation cyclic loading over steel beam column with steel angle and gusset in Abaqus
In this tutorial, Simulation cyclic loading over steel beam-column with steel angle and gusset in Abaqus has been investigated. The steel beam and box column are modeled as a three-dimensional shell part. The steel angle and gusset are modeled as a three-dimensional solid part. You can see a figure of ...
ادامه نوشته »شبیه سازی بارگذاری تکراری روی یک تیر فولادی متصل به ستون به همراه نبشی و لچکی در نرم افزار آباکوس
در این ویدئو آموزشی به شبیه سازی بارگذاری تکراری روی یک تیر فولادی متصل به ستون به همراه نبشی و لچکی در نرم افزار آباکوس پرداخته ایم. تیر فولادی و ستون قوطی شکل با استفاده از مدل شل سه بعدی و نبشی به همراه لچکی به عنوان تقویت کننده به ...
ادامه نوشته »Simulation water sloshing of the buried concrete tanks in soil subjected to seismic loading
In this tutorial, Simulation water sloshing of the buried concrete tanks in soil subjected to seismic loading has been studied. Earthquake brings huge losses in the development of human society repeatedly, which is one of the most serious natural disasters facing humanity. The world’s earthquake occurs about ۵۰۰ million times ...
ادامه نوشته »شبیه سازی اسلاشینگ آب در مخزن بتنی مدفون در خاک تحت اثر شتاب افقی در نرم افزار آباکوس
در این ویدئوی آموزشی به شبیه سازی اسلاشینگ آب در مخزن بتنی مدفون در خاک تحت اثر شتاب افقی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و خاک،آب و مخزن به صورت سالید مدل شده اند. در شکل زیر می توانید نحوه قرارگیری اجزا در ...
ادامه نوشته »Simulation ballistic impact on ceramic titanium composite armor in Abaqus
In this tutorial, the Simulation ballistic impact on the ceramic-titanium-composite armor in Abaqus has been studied. The ceramic, titanium and composite layers are modeled as a three-dimensional solid part. The bullet is modeled as a three-dimensional solid part. You can see a figure of the assembled parts at below The ...
ادامه نوشته »شبیه سازی برخورد سرعت بالای جسم صلب به صفحه چندلایه سرامیک-تیتانیوم-کامپوزیت در آباکوس
در این ویدئوی آموزشی به شبیه سازی برخورد سرعت بالای جسم صلب به صفحه چندلایه سرامیک-تیتانیوم-کامپوزیت در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و مجموعه شامل صفحه سرامیکی محافظ رویی، صفحه تیتانیومی میانی و دو صفحه دولایه کامپوزیتی اپوکسی شیشه در پشت می باشد. گلوله ...
ادامه نوشته »