تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: simulation Ultra High Performance Concrete

بایگانی برچسب: simulation Ultra High Performance Concrete

Simulation cyclic loading of a steel beam-column joint filled with the UHPC and welded stiffeners in Abaqus

In this tutorial, the Simulation cyclic loading of a steel beam-column joint filled with the UHPC and welded stiffeners in Abaqus has been done. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The steel beam and column are modeled as three-dimensional shell parts. The stiffeners are modeled as three-dimensional ...

ادامه نوشته »

Finite element analysis of progressive collapse of reinforced ,Ultra-High-Performance-Concrete frame

In this tutorial, the Finite element analysis of the progressive collapse of reinforced, Ultra-High-Performance-Concrete frame has been investigated. The UHPC frame is modeled as a three-dimensional solid part. The steel reinforcements are modeled as three-dimensional wire parts. You can see a figure of the assembled parts below Progressive collapse is ...

ادامه نوشته »

Simulation five point bending of a composite concrete beam(NSC+UHPFRC) in Abaqus

In this tutorial, the Simulation five point bending of a composite concrete beam(NSC+UHPFRC) in Abaqus has been done. The normal strength concrete beam as a cover is modeled as a three-dimensional solid part. The Ultra-High-Performace-Fiber-Reinforce-Concrete core is modeled as the a three-dimensional solid part. The steel bars and strips are ...

ادامه نوشته »

Simulation steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation

In this tutorial, the Simulation of steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation has been investigated. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part, the embedded beam parts are modeled as a three-dimensional wire part, and finally, the steel projectile is modeled as a solid part. ...

ادامه نوشته »

Simulation cyclic loading of a composite Column(UHPC + Steel box) in Abaqus

In this tutorial, the Simulation cyclic loading of a composite Column(UHPC + Steel box) in Abaqus has been studied. The Ultra-High-Performance Concrete column is modeled as a three-dimensional solid part. The steel box cover is modeled as a three-dimensional shell part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation dynamic bending test of an interior voided RC UHPC beam in Abaqus

In this tutorial, the Simulation dynamic bending test of an interior voided RC UHPC beam in Abaqus has been studied. The Ultra-High-Performance Concrete beam is modeled as three-dimensional solid part with interior sphere voids. The steel bar and strips are modeled as three-dimensional wire parts. The rigid bodies are used ...

ادامه نوشته »

Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus

In this tutorial, the Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus has been investigated. The Ultra-High-Performance-Fiber-Reinforced Concrete is modeled as a three-dimensional solid part. The stud is modeled as a three-dimensional solid part. The steel beam is modeled as a three-dimensional ...

ادامه نوشته »

Simulation curved steel–UHPC–steel double skin composite panel under bending load in Abaqus

In this tutorial, the Simulation curved steel–UHPC–steel double skin composite panel under bending load in Abaqus has been investigated. The UHPC panel is modeled as a three-dimensional solid part. The steel skins are modeled as three-dimensional shell parts. You can see a figure of the assembled parts below Steel–UHPC–steel double ...

ادامه نوشته »

Simulation dynamic bending test of a composite panel( UHPC-NSC) in Abaqus

In this tutorial, the Simulation dynamic bending test of a composite panel( UHPC-NSC) in Abaqus has been investigated. The Ultra-High-Performance Concrete and Normal Strength Concrete are modeled as three-dimensional solid parts. The steel bars are modeled as three-dimensional wire part. A shell rigid body is used as a hydraulic jack ...

ادامه نوشته »

Simulation Ultra High Performance Concrete beam-column joint under cyclic loading in Abaqus

In this tutorial, the Simulation Ultra High Performance Concrete beam-column joint under cyclic loading in Abaqus has been investigated. The UHPC beam-column joint is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation Ultra-high-Performance circular short CFST column in Abaqus under compression test

In this tutorial, the Simulation Ultra-high-Performance circular short CFST column in Abaqus under compression test has been investigated.The concrete core is modeled as a three-dimensional solid part. The steel tube is modeled as a three-dimensional shell part. You can see a figure of the assembled parts below CFST columns are ...

ادامه نوشته »

Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus

In this tutorial, the Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus is investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The steel plate is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. You can see figures ...

ادامه نوشته »

Simulation four points bending of Ultra High Performance Concrete beam with steel beam core in Abaqus

In this tutorial, the Simulation four points bending of Ultra High Performance Concrete beam with steel beam core in Abaqus has been done. UHPC possesses a compressive strength greater than 21.7 ksi (150 Mpa) and a flexural strength greater than 0.72 ksi (10 Mpa) at 28 days. The concept of ...

ادامه نوشته »

Simulation rigid impact on the ultra-high performance fiber reinforced concrete slab in Abaqus

In this tutorial, the Simulation rigid impact on the ultra-high performance fiber reinforced concrete slab in Abaqus has been investigated. UHP-FRC is a new class of concrete that has been developed to give a significantly higher material performance in comparison to its concrete counterparts. UHP-FRC exhibits superior mechanical characteristics, including ...

ادامه نوشته »

Simulation three points bending of Ultra High Performance Concrete beam with metal foam in Abaqus

In this tutorial, the Simulation three points bending of Ultra High Performance Concrete beam with metal foam in Abaqus has been investigated. The concrete beam and metal foam or titanium foam are modeled as three-dimensional solid parts. Three rigid bodies are used to consider boundary and force parts. You can ...

ادامه نوشته »

Simulation axial compression of the Ultra High Performance Concrete column in Abaqus

In this tutorial, the Simulation axial compression of the Ultra-High-Performance Concrete column in Abaqus has been investigated. Ultra-High Performance Concrete (UHPC) is an advanced technology in the concrete industry with superior characteristics such as high strength in compression and tension, ductility, and durability. The concrete column is modeled as a ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo