تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / 2020 / دسامبر

بایگانی ماهانه: دسامبر 2020

Simulation oblique high-velocity impact of an aluminum rod to the silicon-carbide target in Abaqus

In this tutorial, the Simulation oblique high-velocity impact of an aluminum rod to the silicon-carbide target in Abaqus has been investigated. The silicon-carbide target is modeled as a three-dimensional solid part. The aluminum projectile is modeled as a three-dimensional solid part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation cyclic loading behavior of a reinforced rubberized concrete column in Abaqus

In this tutorial, the Simulation cyclic loading behavior of a reinforced rubberized concrete column in Abaqus has been investigated. The rubberized concrete column is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation of low energy impact on the RC beam and residual displacement investigation in Abaqus

In this tutorial, the Simulation of low energy impact on the RC beam and residual displacement investigation in Abaqus has been done. The concrete beam is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire parts. The hammer is modeled as a rigid ...

ادامه نوشته »

شبیه سازی تیر بتنی مسلح تحت اثر ضربه کم انرژی در نرم افزار آباکوس-بررسی جابه جایی پسماند

در این مثال آموزشی به شبیه سازی تیر بتنی مسلح تحت اثر ضربه کم انرژی در نرم افزار آباکوس-بررسی جابه جایی پسماند- در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل تیر بتنی به صورت سالید، میلگردهای طولی و خاموت ها به صورت سه بعدی ...

ادامه نوشته »

Simulation of rigid body impact to the interior voided RC slab in Abaqus

In this tutorial, the Simulation of rigid body impact on the interior voided RC slab in Abaqus has been investigated. The RC voided slab is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. The rigid impactor is modeled as a three-dimensional shell part. ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به پنل بتنی حفره دار در نرم افزار آباکوس- بررسی تخریب

در این ویدئوی آموزشی به شبیه سازی برخورد جسم صلب به پنل بتنی حفره دار در نرم افزار آباکوس- بررسی تخریب- پرداخته ایم. مدلسازی شامل دال بتنی به صورت سه بعدی و تغییر شکلپذیر، میلگردها به صورت سه بعدی و سیمی و در نهایت جسم صلب به صورت سه بعدی ...

ادامه نوشته »

Simulation dynamic bending of RC beams strengthened with CFRP rods and Epoxy glue in Abaqus

In this tutorial, the Simulation dynamic bending of RC beams strengthened with CFRP rods and Epoxy glue in Abaqus has been done. The concrete beam is modeled as a three-dimensional solid part. The CFRP rod and epoxy glue are modeled as three-dimensional solid parts. The steel bars and strips are ...

ادامه نوشته »

شبیه سازی خمش دینامیکی تیر بتنی مسلح به میلگرد فولادی،چسب اپوکسی و میلگردCFRP در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش دینامیکی تیر بتنی مسلح به میلگرد فولادی،چسب اپوکسی و میلگردCFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل پارت تیر بتنی به صورت سالید و سه بعدی، پارت میلگرد CFRP به صورت سالید و سه بعدی، پارت چسب به صورت سالید و ...

ادامه نوشته »

Simulation blast explosion over the composite panel(Steel-Aluminum-Ceramic-CFRP) in Abaqus

In this tutorial, the Simulation blast explosion over the composite panel(Steel-Aluminum-Ceramic-CFRP) in Abaqus has been investigated. The steel and aluminum plates are modeled as three-dimensional solid part. The silicon carbide or ceramic is modeled as a three-dimensional solid part. The CFRP is modeled as a three-dimensional solid part with four ...

ادامه نوشته »

شبیه سازی انفجار روی یک پنل مرکب(فولاد-آلمینیوم-سرامیک-CFRP) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار روی یک پنل مرکب(فولاد-آلمینیوم-سرامیک-CFRP) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صرت سه بعدی بوده و ورق رویی فولادی و آلمینیومی به صورت سالید و تغییر شکلپذیر طراحی شده اند. لایه ضخیم سرامیکی و لایه زیرین CFRP چهار لایه نیز به ...

ادامه نوشته »

Simulation dynamic bending test of an interior voided RC UHPC beam in Abaqus

In this tutorial, the Simulation dynamic bending test of an interior voided RC UHPC beam in Abaqus has been studied. The Ultra-High-Performance Concrete beam is modeled as three-dimensional solid part with interior sphere voids. The steel bar and strips are modeled as three-dimensional wire parts. The rigid bodies are used ...

ادامه نوشته »

شبیه سازی خمش دینامیکی تیر بتنی فوق توانمند حفره دار به همراه میلگرد در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش دینامیکی تیر بتنی فوق توانمند حفره دار به همراه میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل تیر بتنی فوق توانمند به صورت سالید و سه بعدی بوده که حفره ها به صورت کره هایی در تیر بوجود آمده اند. میلگرد ...

ادامه نوشته »

Simulation ship moving through Ice-Water path in Abaqus by using SPH method

In this tutorial, the Simulation ship moving through Ice-Water path in Abaqus by using SPH method has been done. The ship is imported to the Abaqus because of its complex geometry. The ice and water are modeled as a three-dimensional solid part. You can see a figure of the assembled ...

ادامه نوشته »

شبیه سازی حرکت کشتی در لایه یخ و آب به روش اس پی اچ در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی حرکت کشتی در لایه یخ و آب به روش اس پی اچ در نرم افزار آباکوس پرداخته ایم. مدسازی شامل هندسه کشتی به صورت صلب بوده که به دلیل پیچیدگی در طراحی، به صورت یک پارت جداگانه به نرم افزار ایمپورت شده است. ...

ادامه نوشته »

Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus

In this tutorial, the Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus has been investigated. The Ultra-High-Performance-Fiber-Reinforced Concrete is modeled as a three-dimensional solid part. The stud is modeled as a three-dimensional solid part. The steel beam is modeled as a three-dimensional ...

ادامه نوشته »

شبیه سازی انفجار روی یک تیر کامپوزیت( بتن فوق توانمند الیافی-تیر فولادی-گلمیخ) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار روی یک تیر کامپوزیت( بتن فوق توانمند الیافی-تیر فولادی-گلمیخ) در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل پارت بتن فوق توانمند الیافی به صورت سالید و سه بعدی، پارت تیر فولادی به صورت شل و سه بعدی و در نهایت گلمیخ ها ...

ادامه نوشته »

Simulation air blast explosion over composite slab(UHPC-Steel) by using cohesive interaction in Abaqus

In this tutorial, the Simulation air blast explosion over campsite slab(UHPC-Steel) by using cohesive interaction in Abaqus  has been done. The two steel covers are modeled as three-dimensional solid part. The Ultra-High-Performance concrete is modeled as a three-dimensional solid par. You can see a figure of the assembled parts below ...

ادامه نوشته »

شبیه سازی انفجار در هوا روی یک پنل کامپوزیت(بتن فوق توانمند-روکش فولادی) با تعریف رفتار کوهسیو در آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار در هوا روی یک پنل کامپوزیت(بتن فوق توانمند-روکش فولادی) با تعریف رفتار کوهسیو در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو روکش فولادی به صورت سالید و تغییر شکلپذیر و همچنین هسته میانی بتن فوق ...

ادامه نوشته »

Simulation low velocity impact on the CFRP-AL Foam-CFRP panel in Abaqus

In this tutorial, the Simulation low velocity impact on the CFRP-AL Foam-CFRP panel in Abaqus has been investigated. The CFRP are modeled as three-dimensional solid parts with four different fiber direction. The Aluminum-Foam as a core part is modeled as a three-dimensional solid part. The projectile is modeled as the ...

ادامه نوشته »

شبیه سازی تست ضربه سرعت پایین روی یک پنل کامپوزیت(الیاف CFRP با هسته فوم فلزی) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی تست ضربه سرعت پایین روی یک پنل کامپوزیت(الیاف CFRP با هسته فوم فلزی) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و هسته فوم آلمینیومی به صورت تغییر شکلپذیر و سالید ترسیم شده است. ورق رویی و زیرین از ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo