تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: impact (صفحه 2)

بایگانی برچسب: impact

Numerical simulation modeling of high velocity impact applied to reinforced concrete panel

In this tutorial Numerical simulation modeling of high velocity impact applied to reinforced concrete panel has been investigated. It is well known that concrete is much stronger in terms of compression than in tension. Because of its high com-pressive strength, and to enhance its tensile strength, tensile reinforcements are added ...

ادامه نوشته »

numerical simulation of CEL explosion over metal tube in the depth of water in Abaqus

In this tutorial numerical simulation of CEL explosion over metal tube in the depth of water in Abaqus has been investigated.An underwater explosion can be divided into two stages: the shock wave and the bubble pulse. Although both inflict severe damage to the adjacent structure, their damage mechanisms are different. Generally, the ...

ادامه نوشته »

Prediction model of depth of penetration for alumina ceramics under garnet impact in Abaqus

In this tutorial Prediction model of depth of penetration for alumina ceramics under garnet impact in Abaqus has been studied .The target and projectile were modeled as three dimensional parts .The JH-2 constitutive model was proposed to describe the response of ceramic materials to large strain rate. The JH-2 constitutive model ...

ادامه نوشته »

شیه سازی برخورد سنگ ریزه(Garnet) به جسم سرامیکی و بررسی آسیب پدید آمده در آباکوس

در این ویدئو به شیه سازی قدم به قدم برخورد سنگ ریزه(Garnet) به جسم سرامیکی و بررسی آسیب پدید آمده در نرم افزار آباکوس پرداخته ایم. برای مدلسازی از فضای سه بعدی استفاده شده است. جسم سرامیکی به صورت پارت سالید سه بعدی  و جسم گارنت به صورت پارت سالید سه ...

ادامه نوشته »

Simulation cold spray process by using SPH method in Abaqus

In this tutorial Simulation cold spray process by using SPH method in Abaqus has been investigated. In Cold Spray, powder particles (typically 10 to 40 µm) are accelerated to very high velocities (200 to 1200 m.s-1) by a supersonic compressed gas jet at temperatures below their melting point. Upon impact with the ...

ادامه نوشته »

Simulation progressive collapse analysis of reinforced concrete structure under blast loading in Abaqus

Progressive collapse refers to the failure of one or a group of key structure load-carrying members that gives rise to a more widespread failure of the surrounding members and partial or complete structure collapse. It is defined as the spread of an initial local failure from element to element resulting ...

ادامه نوشته »

Finite element simulation of human tooth under static load in Abaqus

Due to the universal character of the finite element method, which enables modeling of complex physical phenomena, its increasingly broad use in an interdisciplinary context, connected with the analysis of mechanical parameters of modern materials, can be observed. Among the present day areas of application of numerical analyses involving FEM, ...

ادامه نوشته »

Simulation earthquake load over masonry wall(concrete brick) in Abaqus-Micro model

Recent rise in terrorist activities around the globe have attracted attention of engineers and scientists towards the vulnerability of buildings and infrastructure to blast loads. The consequent effects of these loads may range from minor damage to structural collapse accompanied by huge loss of life. The masonry, which is the ...

ادامه نوشته »

Deformation behavior of multi-layered materials(silicon carbide,steel,aluminium,CFRP) under impact loading in Abaqus

The study of interaction between two impacting bodies, known as impact dynamics or terminal ballistics has many crucial applications. Bullet impact on armor, occupant and pedestrian safety during automobile accidents, tool drop on aircraft wing, are few examples where impact dynamics plays an important role. An in-depth understanding of deformation ...

ادامه نوشته »

Numerical investigations of S-Glass/Polyester composite laminate plate under low energy impact

With the growing use of composites in military, air vehicles and naval structures, sporting goods and the power industry, the comprehension of impact mechanism and dynamic behavior is critical to composite designers and end users. A wealth of knowledge has been published on dynamic impact response of composite materials and ...

ادامه نوشته »

Blast simulation and damage investigate of insulated concrete sandwich panel in Abaqus

Insulated concrete sandwich panels are comprised of two outer concrete wythes and an inner layer of foam insulation. They have been increasingly used because of their advantages of light weight and energy efficiency. Various shear connectors can be used to connect the two outer concrete wythes. More recently, Fiber-Reinforced Polymer ...

ادامه نوشته »

Numerical simulation on the water impact of 3D body by using CEL method in Abaqus

Ocean waves are a significant resource of inexhaustible, non-polluting energy. Waves are caused by the wind blowing over the surface of the ocean. In many areas of the world, the wind blows with enough consistency and force to provide continuous waves. A variety of technologies have been proposed to capture ...

ادامه نوشته »

Simulation bird strike impact phenomenon over aircraft cabin in Abaqus

Impact with flying birds also called“bird strikes”can be critical for flight safety especially when small general aviation airplanes are involved. Nowadays, collisions between airplanes and birds are becoming much more frequent because of the increasing air traffic. The Federal Aviation Administration airworthiness rules obliges an airplane to be able to ...

ادامه نوشته »

Simulation high-velocity impact failure of aluminium honeycomb sandwich panels in Abaqus

Sandwich panels are widely used in lightweight construction especially in aerospace industries because of their high specific strengths and stiffnesses. In the service life of a sandwich panel, impacts are expected to arise from a variety of causes. Debris may be propelled at high velocities from the runway during aircraft ...

ادامه نوشته »

شبیه سازی برخورد جسم فولادی سرعت بالا به سازه لانه زنبوری در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله برخورد جسم فولادی سرعت بالا به سازه لانه زنبوری در  نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و  کره فلزی به صورت جسم سالید تعریف شده است. جسم هدف متشکل از دو صفحه شل رویی و زیرین و ...

ادامه نوشته »

Simulation air blast load over concrete slab reinforced with CFRP and epoxy glue in Abaqus

Nowadays, a high risk of terrorist attacks is observed. Bombing attacks are the most frequent terrorist activities. Unfortunately, public infrastructure such as airports and railway stations, shopping centres, offices, financial and government institutions are highly exposed to such attacks. There were also several cases of such attacks with thousands of ...

ادامه نوشته »

Simulation and Finite Element Analysis for Subsurface Damage in Glass under ball impact in Abaqus

An understanding of the response of brittle and ductile materials under hyper velocity impact is  required for analysis of the space debris and micro meteoroid impact flux via retrieved spacecraft  surfaces. Brittle material surfaces exposed in Low Earth Orbit include solar arrays and windows.  Laboratory experiments are able to access ...

ادامه نوشته »

شبیه سازی برخورد توپ حاوی گاز به شیشه و بررسی شکست آن در آباکوس

در این ویدئو به شبیه سازی قدم به قدم برخورد توپ حاوی گاز به شیشه و بررسی شکست آن در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و توپ به صورت یک پارت شل و شیشه به صورت سالید مدل شده اند.برای توپ از ماده ای مشابه ...

ادامه نوشته »

Numerical modeling based on coupled Eulerian-Lagrangian approach and experimental investigation of water jet spot welding process

Spot welding is one of the most convenient processes to create a quick and permanent joint between lightweight industrial metallic parts and is an integral part of manufacturing processes especially in auto-motive industry. Currently, electrical resistance welding is the most applied method in spot welding. However it has some limitations. ...

ادامه نوشته »

شبیه سازی اثر واترجت در اتصال دو ورق مسی وآلومینیومی به روش اویلری در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله  اثر واترجت در اتصال دو ورق مسی وآلومینیومی به روش اویلری در نرم افزار آباکوس پرداخته ایم.ورق ها به صورت سه بعدی و تغییرشکل پذیر و آب به صورت اویلری مدل شده اند. برای در نظر گرفتن ماهیت آب در نرم افزار ...

ادامه نوشته »

Simulation rigid impact on granite stone with SPH method in Abaqus- Damage investigation

The material constitutive relationship is not only the conclusion of some regulations summarized from experimental data, but also plays an important role in numerical simulations. It reflects the realistic physical and mechanical properties of materials as much as possible to improve the accuracy of numerical results. At present, various kinds ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به تخته سنگ گرانیتی به روش اس پی اچ در آباکوس

در این ویدئو به شبیه سازی برخورد پرتابه سرعت بالا به تخته سنگ گرانیتی به روش اس پی اچ در نرم افزار آباکوس پرداخته ایم. سنگ های گرانیتی رفتار مهندسی مختلفی را نشان می دهند که ممکن است در عملیات تونل، استخراج معادن، ثبات شیب و استفاده از سنگ به عنوان مصالح ...

ادامه نوشته »

Numerical simulation of high velocity impact on Granite stone in Abaqus and investigate induced damage

The material constitutive relationship is not only the conclusion of some regulations summarized from experimental data, but also plays an important role in numerical simulations. It reflects the realistic physical and mechanical properties of materials as much as possible to improve the accuracy of numerical results. At present, various kinds ...

ادامه نوشته »

شبیه سازی برخورد سرعت بالا به صفحه سنگی(گرانیت) و بررسی آسیب آن در آباکوس

در این ویدئو به شبیه سازی برخورد سرعت بالای یک پرتابه به صفحه سنگی(گرانیت) و بررسی آسیب بوجود آمده در  آن در نرم افزار آباکوس پرداخته ایم. سنگ گرانیت از جمله مواد ترد بوده که برای مدلسازی آن ،آباکوس چندین متریال مدل مختلف را در  محیط CAE,INP و در قالب سابروتین ...

ادامه نوشته »

numerical studies on corrugated sandwich panels under crushing loading in Abaqus

Nowadays lightweight and higher performances place increasing importance to design quality, and both become the critical issues confronted in engineering field. Take transportation industry as an example, there have been a broad range of studies reported on thin-walled structures,in which the plastic deformation is commonly used to absorb majority of ...

ادامه نوشته »

شبیه سازی مچالگی ساندویچ پنل تحت اثر بار فشاری در آباکوس

در این ویدئو به شبیه سازی مچالگی ساندویچ پنل تحت اثر بار فشاری در نرم افزار آباکوس پرداخته ایم.  پنل های ساندویچی به طور گسترده در صنعت هوا و فضا،صنایع دریایی و ساخت و تولید به کار می رود. از نقطه نظر ایمنی این سازه ها می توانند در مقابل برخورد ...

ادامه نوشته »

Simulation Cold Spray process in Abaqus by using ALE method

In this tutorial Simulation Cols Spray process in Abaqus by using ALE method has been investigated. In Cold Spray, powder particles (typically 10 to 40 µm) are accelerated to very high velocities (200 to 1200 m.s-1) by a supersonic compressed gas jet at temperatures below their melting point. Upon impact with the ...

ادامه نوشته »

Simulation rigid impact on CFRP plates in Abaqus

The use of composite materials in critical aerospace structures is still limited by their relatively weak mechanical response to impact events. In addition, composite laminates subjected to low velocity impact such as dropped tools or vehicle impact, exhibit significant internal damage and delamination, with little indication on the impact surface ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به صفحات کامپوزیتی CFRP در نرم افزار آباکوس

در این ویدئو به شبیه سازی برخورد جسم صلب به صفحات کامپوزیتی CFRP در نرم افزار آباکوس پرداخته ایم.الیاف کربن نخستین بار در سال ۱۸۷۹ میلادی زمانی که ادیسون از این ماده به عنوان رشته پر مقاومت در ایجاد روشنایی الکتریکی استفاده کرد، پای به عرصه علم گذاشت. در آغاز دهه ...

ادامه نوشته »

Simulation of the Cold Spray Particle Deposition Process in Abaqus by using CEL method

In recent years, a significant number of studies have been dedicated to the modeling of impact dynamics. For very low-speed impact, such as in the shot peening metal working process, the semi-analytical method can be used for the modeling of both thick (half-space assumption) and thin (finite-depth) structures.In the case ...

ادامه نوشته »

Simulation an Eulerian approach to soil impact analysis for crashworthiness applications

The primary motivation of this study was the development and implementation of an explicit nonlin-ear dynamic finite element based methodology for investigating the crashworthiness of small lightweight rigid impacting into soft soil.The crash dynamics of aircraft are highly dependent on the characteristics of the impact terrain, as different terrains produce ...

ادامه نوشته »

شبیه سازی برخورد یک جسم صلب به توده خاک و بررسی گودال ایجاد شده بر اثر آن در آباکوس

در این ویدئو به شبیه سازی قدم به قدم  برخورد یک جسم صلب به توده خاک و بررسی گودال ایجاد شده بر اثر آن در نرم افزار آباکوس پرداخته ایم. در این مثال از فضای سه بعدی استفاده و پرتابه به صورت ریجید و توده خاک به صورت یک پارت اویلری ...

ادامه نوشته »

Simulation coupled acoustic–structural response of hull subject to underwater explosion in ABAQUS

One of the major problems confronted by the designer of submersibles is to minimize the weight of the pressure hull for increasing the payload of a crew and necessary equipment and to simultaneously enhance the strength of the pressure hull for withstanding hydrostatical pressure, underwater explosive loading and other environmental ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به یک ورق ساندویچی استیل سرامیک در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله  برخورد پرتابه سرعت بالا به یک ورق ساندویچی استیل سرامیک در نرم افزار آباکوس پرداخته ایم. اجزا به صورت سه بعدی بوده و  پرتابه به صورت صلب و سایر پارت ها به صورت تغییر شکل پذیر مدل گردیده شده اند. برای ورق ...

ادامه نوشته »

Simulation high-velocity impact of a ceramic target with Johnson–Holmquist material model

In this video Simulation high-velocity impact of a ceramic target with Johnson–Holmquist material model has been studied.Ceramic materials are commonly used in armor protection applications. In recent years Johnson, Holmquist, and their coworkers have developed a series of constitutive relations to simulate the response of ceramic materials under large strain, high-strain ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به هدف سرامیکی در آباکوس با استفاده از مدل جانسون هلمکوئیست

در ای ویدئو به شبیه سازی قدم به قدم  برخورد  یک پرتابه سرعت بالا به هدف سرامیکی در آباکوس با استفاده از مدل جانسون هلمکوئیست پرداخته ایم. اجزا به صورت سه بعدی بوده و برای پرتابه متریال طلا و برای سرامیک نیز از متریال مدل جانسون هلمکوئیست که در نرم افزار ...

ادامه نوشته »

Simulation Ballistic performances of concrete targets subjected to projectile impact by Johnson, Holmquist material model in Abaqus

Concrete is a widely used material in the construction of strategic and important structures such as nuclear containments, bridges, storage structures and military bunkers. In the present study perforation experiments and simulations on finite element code ABAQUS/Explicit have been carried out to understand the behavior of concrete against projectile impact.The ...

ادامه نوشته »

شبیه سازی برخورد پرتابه صلب به هدف بتنی با مدل ماده JH2 در آباکوس

در این ویدئو به شبیه سازی برخورد پرتابه صلب به هدف بتنی با مدل ماده JH2 در نرم افزار آباکوس پرداخته ایم. پرتابه به صورت صلب مدل شده و هدف بتنی به صورت تغییر شکل پذیر در نظر گرفته شده است. آباکوس متریال مدلهای مختلفی را برای بتن ارائه می دهد ...

ادامه نوشته »

Simulation bird strike by using hybrid Eulerian–Lagrangian formulation in Abaqus

The work presented in this paper deals with application of explicit finite element analyses in order to predict bird strike induced impact damage on A very common example of foreign object impact in air trans-port is bird strike. Due to increased density of the air transport and changing migration routes ...

ادامه نوشته »

شبیه سازی برخورد پرنده به ورق آلمینیومی به روش اویلری در آباکوس

در این ویدئو به شبیه سازی برخورد پرنده به ورق آلمینیومی به روش اویلری در نرم افزار آباکوس پرداخته ایم.برای مدلسازی می توان از سایر وش های لاگرانژی یا اس پی اچ استفاده نمود اما در این مساله پرنده و محیط پیرامون در قالب پارت های اویلری بوده که امکان پراکنده ...

ادامه نوشته »

Perforation mechanics of aluminium protective plates subjected to impact by projectile in ABAQUS

This paper focuses on the mechanical behavior of aluminium alloy under impact loading. This study has been carried out numerical techniques.The impact-protective capacity of structural components has be-come a relevant requirement for the automotive and aerospace industries. Both energy absorption and crash worthiness concepts are essential for the development of new ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به ورق آلومینیومی و بررسی آسیب آن در آباکوس

در این ویدئو به شبیه سازی برخورد پرتابه سرعت بالا به ورق آلومینیومی و بررسی آسیب آن در نرم افزار آباکوس پرداخته ایم. ورق به صورت سه بعدی بوده و برای آن از معیار پلاستیسیته و آسیب جانسون کوک استفاده شده است.پرتابه به صورت صلب در نظر گرفته شده است. در ...

ادامه نوشته »

Behaviour of cylindrical steel drums under blast loading conditions with SPH method in Abaqus

In this tutorial Behaviour of cylindrical steel drums under blast loading conditions with SPH method in Abaqus has been investigated. In the last few decades, a number of major industrial accidents have occurred around the world.The blast wave of detonation has a sudden rise in pressure above atmospheric conditions to a peak ...

ادامه نوشته »

Simulation under ground explosion inside two concrete tunnels in Abaqus by using CEL approach

An explosion on the ground surface can cause significant damage to a tunnel located at a shallow depth below groundA comprehensive approach to simulate the effects of an explosion occurring inside a buried infrastructure tunnel on the soil surface and on nearby tunnels is presented. The approach considers all the ...

ادامه نوشته »

Simulation high velocity bullet impact to three layers plate in Abaqus

In this video Simulation high velocity bullet impact to three layers plate in Abaqus has been investigated. To model all part three dimensional space was used. Ductile and Shear damage with evolution for modeling steel behavior, Johnson-Cook damage and plasticity for modeling aluminium behavior and Ductile damage couple with Drucker-Prager plasticity for ...

ادامه نوشته »

Simulation water jet spot welding between two aluminium plates in Abaqus

To gain an understanding of the mechanism of material damage and removal during high-speed liquid impact and understanding of the magnitude and spatial distribution of the transient pressures caused by such an impact on a solid surface would be helpful.The water jet spot welding tests were preformed using a Abaqus ...

ادامه نوشته »

شبیه سازی اتصال دو قطعه آلومینیومی با استفاده از جت آب در آباکوس-بررسی ترم تنش

در این ویدئو به شبیه سازی فرآیند اتصال دو قطعه آلومینیومی با استفاده از جت آب(Water Jet) در نرم افزار آباکوس پرداخته ایم. قطعات به صورت سه بعدی و مدل جانسون کوک برای تعریف رفتار قطعات آلومینیومی استفاده شده است. ستون آب نیز با استفاده از یک پارت سه بعدی ...

ادامه نوشته »

Simulation soil impact to the metal plate in Abaqus by using SPH method

In this video soil impact to the metal plate in Abaqus by using SPH method has been simulated. The soil is modeled as three dimensional part with elastic–plastic behavior and smooth particle hydrodynamic formulation. Coulomb-Mohr plasticity is implanted for soil. To definite particle element edit input file capability has been ...

ادامه نوشته »

شبیه سازی برخورد توده خاک به صفحه فلزی در نرم افزار آباکوس به روش اس پی اچ

در این ویدئو به شبیه سازی قدم به قدم برخورد یک توده خاک به صفحه فلزی در نرم افزار آباکوس به روش اس پی اچ پرداخته ایم. برای مدلسازی خاک از فضای سه بعدی و برای متریال آن از خاصیت الاستیک و پلاستیک موهر-کلمب استفاده شده است. برای مدلسازی خاک ...

ادامه نوشته »

Simulation rigid body impact to concrete wall reinforced with composite plate by using SPH method in Abaqus

In this Tutorial Simulation rigid body impact to concrete wall reinforced with composite plate by using SPH method in Abaqus has been investigated. All parts are modeled as three dimensional and to definite concrete behavior CDP material model with SPH formulation has been used. Composite made of Epoxy-Glass layers modeled by ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo