تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: simulation (صفحه 2)

بایگانی برچسب: simulation

Simulation dynamic four point bending test of a Gravity beam in Abaqus

In this tutorial, the Simulation dynamic four point bending test of a Gravity beam in Abaqus has been investigated. Gravity Beams, a term coined in this investigation, are those beams in which gravity is used to design the topology of beam form conjointly with the novel manufacturing strategy Fabric Formwork. ...

ادامه نوشته »

Numerical Investigation of Rigid Impact on Steel Wire Reinforced Foam Core/Composite Skin Sandwich Panel

In this tutorial, the Numerical Investigation of Rigid Impact on Steel Wire Reinforced Foam Core/Composite Skin Sandwich Panel in Abaqus software has been investigated. The rigid projectile is modeled as the three-dimensional shell part. The steel reinforcements are modeled as wire part. The glass-epoxy part is modeled as a three-dimensional ...

ادامه نوشته »

Simulation low energy impact of a rigid hammer on the wood-cement-concrete panel in Abaqus

In this tutorial, Simulation low energy impact of a rigid hammer on the wood-cement-concrete panel in Abaqus has been investigated. The panel contians three layers, top layer is wood-cement part as a soild model, the second layer is normal strenght concrete as a solid part, and third layer is wood-cement ...

ادامه نوشته »

Simulation rocket impact and explosion over a concrete panel in Abaqus

In this tutorial the Simulation rocket impact and explosion over a concrete panel in Abaqus has been investigated. The concrete panel is modeled as a three-dimensional solid part. The rocket is modeled as a three-dimensional shell part, and the TNT is modeeld as a solid part. You can see a ...

ادامه نوشته »

Simulation air blast load over a composite panel(Aluminum+bamboo fiber) in Abaqus

In this tutorial, the Simulation air blast load over a composite panel(Aluminum+bamboo fiber) in Abaqus has been investigated. Because of the symmetry circumstance, one quarter of the geometries are modeled. The aluminum plates are modeled as three-dimensional solid part. The bamboo plate as a core of the composite panel is ...

ادامه نوشته »

Simulation four point bending test of a foamed concrete beam reinforced with steel bars and bamboo fiber in Abaqus

In this tutorial, the Simulation four point bending test of a foamed concrete beam reinforced with steel bars and bamboo fiber in Abaqus has been investigated. The foamed concrete part is modeled as a three-dimensional solid part. The bamboo composite is modeled as a three-dimensional shell part with some layers. ...

ادامه نوشته »

Simulation air blast explosion over a steel-UHPC-steel sandwich composite beam stud connectors in Abaqus

In this tutorial, the Simulation air blast explosion over a steel-UHPC-steel sandwich composite beam stud connectors in Abaqus has been studied. The two steel plates with studs are modeled as three-dimensional solid part. The UHPC is modeled as a three-dimensional solid part as a core of the sandwich beam. You ...

ادامه نوشته »

Simulation high-velocity impact on the Aluminum-Bamboo sandwich panel in Abaqus

In this tutorial, the Simulation high-velocity impact on the Aluminum-Bamboo sandwich panel in Abaqus has been done. The aluminum plate is modeled as a three-dimensional solid part. The bamboo plate is modeled as a shell part with thirty two layers with different fiber angle. The projectile is modeled as a ...

ادامه نوشته »

Simulation dynamic bending test of SCS sandwich beams with UHPFRC in Abaqus

In this tutorial, the Simulation dynamic bending test of SCS sandwich beams with UHPFRC in Abaqus has been investigated. The upper and bottom steel plates with studs are modeled as three-dimensional solid part. The middle UHPFRC is modeled as a three-dimensional solid part. You can see a figure of the ...

ادامه نوشته »

Simulation air blast explosion over a timber wood beam reinforced with CFRP in Abaqus

In this tutorial, the Simulation air blast explosion over a timber wood beam reinforced with CFRP in Abaqus has been investigated. The two wood beam layers are modeled as three-dimensional solid parts. The CFRP sheet is modeled as a three dimensional shell part. You can see a figure of the ...

ادامه نوشته »

Simulation low energy impact on the multilayered wood panel in Abaqus-Damage investigation

In this tutorial, the Simulation low energy impact on the multilayered wood panel in Abaqus-Damage investigation – has been done. The rigid ball is modeled as a three-dimensional shell part with a specific mass. Each wood panel is modeled as a three-dimensional solid part, and between the layers, the cohesive ...

ادامه نوشته »

Simulation cyclic loading of a steel beam embedded in a concrete block in Abaqus

In this tutorial, the Simulation cyclic loading of a steel beam embedded in a concrete block in Abaqus has been done. The steel beam (or column) is modeled as a three-dimensional shell part. The concrete block is modeled as a three-dimensional solid part. The half of the steel beam is ...

ادامه نوشته »

Simulation impact spot welding of two steel plates in Abaqus

In this tutorial, the Simulation inpact spot welding of two steel plates in Abaqus has been done. The steel flyer and base plates are modeled as three-dimensional solid part. The rigid impactor is modeled as three-dimensional shell part. You can see a figure of the assembled parts below Due to ...

ادامه نوشته »

Simulation dynamic four points bending of the timber wood beam reinfroced with CFRP rod and Glue in Abaqus

In this tutorial, the Simulation dynamic four points bending of the timber wood beam reinfroced with CFRP rod and Gluein Abaqus  has been investigated. The wood beam is modeled as a three-dimensional solid part with two compression and tension sections. The adhesive and CFRP rod also is modeled as three-dimensional ...

ادامه نوشته »

Simulation close explosion test of a glass shield in Abaqus

With the growing threat and risk of attacks and explosions in densely populated urban environments, the need for advanced security glass in windows, doors, police protective galss shield, and glass partitions is also increasing. In a powerful explosion, conventional glass panes will splinter even at a great distance from the ...

ادامه نوشته »

شبیه سازی انفجار در نزدیکی محافظ شیشه ای در آباکوس-بررسی آسیب

در این ویدئوی آموزشی به شبیه سازی انفجار در نزدیکی محافظ شیشه ای در آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل هندسه شیشه محافظ می باشد که محل انفجار همانطور که در شکل زیر نمایش داده شده، در فاصله نزدیکی از آن قرار دارد. هدف ...

ادامه نوشته »

Numerical simulation of interlocking blocks under compression in Abaqus

In this tutorial, the Numerical simulation of interlocking blocks under compression in Abaqus has been done. The blocks are modeled as three dimensional solid parts with interlocking surfaces. You can see a figure of the assembled parts below Masonry structure is one of the most predominant structures throughout the world ...

ادامه نوشته »

Simulation Wood-Glue-CFRP beam under dynamic four points bending test in Abaqus

In this tutorial the Simulation Wood-Glue-CFRP beam under dynamic four points bending test in Abaqus has been investigated. The wood beam are modeled as three dimensional solid part, the adhesive parts are modeled as three-dimensional solid parts, the CFRP also si solid and the the roller are modeled as rigid ...

ادامه نوشته »

شبیه سازی خمش تیر چوبی به همراه کامپوزیت و چسب به صورت دینامیکی در آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش تیر چوبی به همراه کامپوزیت و چسب به صورت دینامیکی در آباکوس پرداخته ایم. مدلسازی شامل هندسه های تیر چوبی به صورت سالید، هندسه کاموپوزیت CFRP به صورت سالید و سه بعدی، مواد متصل کننده یا چسب به صورت سالید و سه ...

ادامه نوشته »

Simulation sequential CEL explosion in the depth of soil over the RC slab in Abaqus

In this tutorial, the Simulation sequential CEL explosion in the depth of soil over the RC slab in Abaqus has been investigated. The concrete slab is modeled as three-dimensional solid part, the steel reinforcement is modeled as wire part. The Soil, and TNT are modeled as three-dimensional solid parts. The ...

ادامه نوشته »

Simulation UHPFRC beam with initial void reinforced with CFRP rod and Expoxy under dynamic bending

In this tutorial, the Simulation UHPFRC beam with initial void reinforced with CFRP rod and Expoxy under dynamic bending has been investigated. The concrete beam, CFRP rod, epoxy glu are modeled as three-dimensional solid parts. Two rigid body as a hydraulic jacks also are modeled. You can see a figure ...

ادامه نوشته »

Simulation CEL explosion in the depth of water near the aluminum hull in Abaqus- three sea mine explosion

In this tutorial, the Simulation CEL explosion in the depth of water near the aluminum hull in Abaqus- three sea mine explosion- has been done. The domain is modeled as a three-dimension Eurlerian part. The hull is modeled as a three-dimensional shell part. The water and three TNT parts are ...

ادامه نوشته »

شبیه سازی انفجار زیر آب به روش اویلری در سه نقطه در نزدیکی سازه آلمینیومی در آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب به روش اویلری در سه نقطه در نزدیکی سازه آلمینیومی در آباکوس پرداخته ایم. مدلسازی شامل هندسه محیط به صورت اویلری و سه بعدی، هندسه سازه آلومینیومی به صورت شل و سه بعدی، ماده منفجره به صورت توپر و سه ...

ادامه نوشته »

Simulation air blast explosion over the rubberized concrete column reinforced with green composite in Abaqus

In this tutorial, the Simulation air blast explosion over the rebberized concrete column reinforced with green composite in Abaqus has been done. The rubberized concrete column is modeled as a three-dimensional solid part. The green composite with some layers is modeled as a three-dimensional shell part. The steel reinforcements are ...

ادامه نوشته »

Simulation dynamic bending test of a rubberized concrete beam reinforced with green composite

In this tutorial, the Simulation dynamic bending test of a rubberized concrete beam reinforced with green composite  in abaqus has been investigated. The rubberized concrete beam is modeled as a three-diensional solid part. The green composite is modeled as a three-dimensional shell part with four layups. The steel bas and ...

ادامه نوشته »

شبیه سازی برخورد گلوله به پنل سرامیکی تقویت شده با کامپوزیت سبز در آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد گلوله به پنل سرامیکی تقویت شده با کامپوزیت سبز در نرم افزار آباکوس پرداخته ایم. مدل سازی شامل هندسه های پنل سرامیکی به صورت سالید و سه بعدی، ورق کامپوزیت سبز به صورت شل سه بعدی، و گلوله یا پرتاب شونده به ...

ادامه نوشته »

Explosion simulation near the reinforced concrete wall with green composite-SPH method

In this tutorial the explosion simulation near the reinforced concrete wall with green composite-SPH method- has been investigated. The TNT part is modeled as a three-dimensional solid part. The concrete wall or slab is modeled as three-dimensional solid part, the green composite part with eight layers is modeld as three-dimensional ...

ادامه نوشته »

Simulatio bird strike impact with SPH method to the composite blade in Abaqus

In this tutorial the Simulatio bird strike impact with SPH method to the composite blade in Abaqus has been investigated. The bird is modeled as the three-dimension solid part. The composite blade with eight layers is modeled as three-dimensional shell part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation CEL explosion inside the CFRP composite vessel in Abaqus

In this tutorial the Simulation CEL explosion inside the CFRP composite vessel in Abaqus has been investigated. The CFRP vessel is modeled as a three-dimensional shell part in sixteen layers with different oreintation. The TNT part is modeled as a three-dimensional solid part. The surounding is modeled as an Eurlerian ...

ادامه نوشته »

Simulation low energy impact on the concrete slab with pre tensioned bars reinforced with GFRP in Abaqus

In this tutorial the Simulation low energy impact on the concrete slab with pre tensioned bars reinforced with GFRP in Abaqus has been studeid. Concrete is modeled as a three-dimensional solid part. The GFRP part is model as plannar shell part. The steel basrs are modeled as three-dimensional wire part ...

ادامه نوشته »

Simulation CFRP water storage tank under close air blast explosion in Abaqus

In this tutorial the Simulation CFRP water storage tank under close air blast explosion in Abaqus has been investigaed. The CFRP tank is modeled as a three-dimensional shell part. The water is modeled as solid part and it’ll used as reference volume in load section to define the amount and ...

ادامه نوشته »

Simulation internal explosion of a pipe with steel supporters in Abaqus

In this tutorial the Simulation internal explosion of a pipe with steel supporters in Abaqus has been investigated. The steel pipe is modeled as three-dimensional solid part, it can also be shell part. The upper and bottom supports are modeled as three-dimensional solid part. You can see a figure of ...

ادامه نوشته »

Simulation air blast explosion test over a reinforced UHPC- Damage analysis

This tutorial investigates a Simulation air blast explosion test over a reinforced UHPC- Damage analysis. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part. The embedded bars and strips parts are modeled as a three-dimensional wire part. You can see a figure of the assembled parts below The UHPC ...

ادامه نوشته »

Simulation steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation

In this tutorial, the Simulation of steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation has been investigated. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part, the embedded beam parts are modeled as a three-dimensional wire part, and finally, the steel projectile is modeled as a solid part. ...

ادامه نوشته »

Abaqus Welding Package- A lecture contains Seventeen tutorials – More than Ten hours of simulation

In this full lecture through eighteen tutorials with more than ten hours duration time, all aspects of welding are investigated. Each tutorial contains cae, inp, step-by-step English video, Fortran code, and papers. The lecture includes some subjects like Friction Stir Welding(Aluminum plates, steel plates, copper plates with CEL, ALE, and ...

ادامه نوشته »

Abaqus Impact Package- A lecture contains Forty tutorials – More than Twenty hours of simulation

In this package, the high and low-velocity impacts are investigated through 40 step-by-step tutorials for more than 20 hours. Through those 40 separated simulations, all aspects of the impact and collision are studied. Each tutorial contains cae, inp, step-by-step English video, and papers, also some of them have codes. Impact ...

ادامه نوشته »

پکیج جامع شبیه سازی جوش در آباکوس- ۱۹ مثال کاربردی با بیش از ۸۰ درصد تخفیف

در این پکیج آموزشی تمامی مسائل مربوط به جوشی ذوبی،مقاومتی و انفجاری موجود در سایت در قالب ۱۹ مثال جداگانه قرار داده شده است. مثال ها به صورت قدم به قدم بوده و تمامی انواع مهم جوش را مورد بررسی قرار داده است. تمامی مثالها به صورت تکی در سایت ...

ادامه نوشته »

Simulation steel bullet impact to the armor panel(Ceramic- Aluminum Foam) in Abaqus

In this tutorial, the Simulation steel bullet impact to the armor panel(Ceramic- Aluminum Foam) in Abaqus has been investigated. The steel bullet is modeled as a three-dimensional solid part. The ceramic and aluminum foam are modeled as three-dimensional solid parts. Because of the symmetry conditions, one-quarter of the whole model ...

ادامه نوشته »

Simulation rigid projectile impact to the ceramic-CFRP panel in Abaqus-Damage investigation

In this tutorial, the Simulation rigid projectile impact to the ceramic-CFRP panel in Abaqus-Damage investigation – has been done. The rigid projectile is modeled as a three-dimensional shell part. The ceramic is modeled as a three-dimensional thick solid part. The CFRP or carbon fiber is modeled as a three-dimensional shell ...

ادامه نوشته »

شبیه سازی برخورد صلب به یک پنل مرکب سرامیک-CFRP و بررسی تخریب در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد صلب به یک پنل مرکب سرامیک-CFRP و بررسی تخریب در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل پارت پرتابه صلب به صورت سه بعدی و شل، پارت هدف سرامیکی به صورت یک لایه ضخیم سه بعدی و سالید و در نهایت پارت ...

ادامه نوشته »

Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation

In this tutorial, the Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation – has been done. The explosive part, or the TNT is modeled as a three-dimensional solid part. The aluminum sheets are modeled as three-dimensional solid parts. The Aluminum Foam as a core is ...

ادامه نوشته »

Simulation rigid impact to the composite panel(CFRP+TPU+AL) in Abaqus-Damage investigation

In this tutorial, the Simulation rigid impact to the composite panel(CFRP+TPU+AL) in Abaqus-Damage investigation – has been studied. The CFRP part is modeled as a shell part with eight layers. The Thermoplastic polyurethane is modeled as a three-dimensional solid part. The Aluminum part is modeled as a three-dimensional solid part. ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به پنل مرکب(CFRP+TPU+AL) و بررسی تخریب در آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد جسم صلب به پنل مرکب(CFRP+TPU+AL) و بررسی تخریب در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و صفحه کامپوزیتی الیاف کربن به صورت هشت لایه و شل مدل شده است. لایه میانی پلی اورتان یا Thermoplastic polyurethane به ...

ادامه نوشته »

Simulation RC beam under repeated impact of the rigid hammer in Abaqus

In this tutorial, the Simulation RC beam under the repeated impact of the rigid hammer in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The steel rebar and strips are modeled as three-dimensional wire parts. The rigid hammer is modeled as a three-dimensional rigid ...

ادامه نوشته »

شبیه سازی برخورد تکراری یک جسم صلب به تیر بتنی مسلح در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد تکراری یک جسم صلب به تیر بتنی مسلح در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و تیر بتنی به صورت سالید، میلگرد و خاموت ها به صورت وایر، و جسم صلب به صورت شل و ریجید طراحی ...

ادامه نوشته »

Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus

In this tutorial, the Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus has been investigated. The aluminum sheets are modeled as three-dimensional solid parts. The TPU is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below. History presents evidence of the ...

ادامه نوشته »

Numerical analysis of tilted angle shear connectors in steel-concrete composite systems in Abaqus

In this tutorial, the Numerical analysis of tilted angle shear connectors in steel-concrete composite systems in Abaqus has been investigated. The concrete block is modeled as a three-dimensional solid part. The steel beam and steel angle connector are modeled as three-dimensional solid parts. Two rigid bodies are used as boundary ...

ادامه نوشته »

Simulation compression test of the concrete column with and without steel reinforcement-Compression test

In this tutorial, the Simulation compression test of the concrete column with and without steel reinforcement-Compression test- has been investigated. The concrete column is modeled as a three-dimensional solid part. The steel reinforcements are modeled as wire parts and two rigid bodies as boundary zone and hydraulic jack. You can ...

ادامه نوشته »

Simulation RC column retrofitted with CFRP and epoxy under compression load in Abaqus

In this tutorial, the Simulation RC column retrofitted with CFRP and epoxy under compression load in Abaqus has been done. The circular concrete column is modeled as a three-dimensional solid part. The sell strips and bars are modeled as three-dimensional wire parts. The CFRP is modeled as a conventional shell ...

ادامه نوشته »

Thermal and Structural Analysis of Exhaust Manifold in Abaqus

In this tutorial, the Thermal and Structural Analysis of Exhaust Manifold in Abaqus has been investigated. The manifold geometry is a complex one, so the geometry is imported to the Abaqus from SolidWorks software. You can see a figure of the manifold part below The exhaust manifold is a very ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo