Recently, external terrorist activities have become one of the most influential events on tunnel structure safety because of the absence of proper mechanisms to detect these events in time to take preventive action. The present simulation used ABAQUS software to investigate the behaviour of an underground box frame tunnel caused ...
ادامه نوشته »
در این ویدئو به شبیه سازی قدم به قدم انفجار به روش اویلری لاگرانژی بر روی یک تونل بتنی مدفون در خاک در نرم افزار آباکوس پرداخته ایم. مدل از چندین پارت سه بعدی تشکیل شده که برای بتن با توجه به اثر انفجار و تغییر شکل های سریع از ...
ادامه نوشته »
Existing studies on the response of buried steel pipelines to explosion generally concern finding safe distance of explosion where pipeline does not undergo plastic deformation while intentional explosions impose intense deformations on steel pipelines. In the present video Eulerian explosion over pipeline has been simulated. JWL equation of state for ...
ادامه نوشته »
این پکیج شامل ده ویدئوی فارسی قدم به قدم شبیه سازی انفجار به روش اویلری پیرامون مسائل گوناگون بوده که هر ویدئو دارای فایل نرم افزاری مربوط به آن بوده و تمامی فایل ها دارای لینک دانلود جداگانه هستند. تمامی عناوین موجود در این پکیج به صورت جداگانه در سایت ...
ادامه نوشته »
In this video CEL explosion inside concrete tunnel in interaction with soil in ABAQUS has been investigated.To perform this analysis Volume Fraction technique to extract TNT amount has been used. Concrete tunnel modeled as a there dimensional with JC material for better performance in explosion phenomenon.Air modeled as Ideal gas , ...
ادامه نوشته »
در این ویدئو به شبیه سازی مرحله به مرحله انفجار به روش اویلری در داخل یک تونل بتنی در تماس با خاک در نرم افزار آباکوس پرداخته ایم. در این مثال از رویه کسر های حجمی برای ایجاد ماده منفجره استفاده شده است. تمامی اجزا به صورت سه بعدی مدل ...
ادامه نوشته »
In this video air blast explosion over a sandwich panel made of Aluminium and Epoxy Glass layers has been simulated. For modeling blast effect CONWEP procedure is appropriate . Aluminium is modeled as three dimensional part and for modeling it’s behavior under blast load ductile damage with Johnson-Cook plasticity and ...
ادامه نوشته »
در این ویدئو به شبیه سازی مرحله به مرحله انفجار در هوا بر روی یک پنل ساندویچی ساخته شده از دولایه آلومینیوم و سه لایه کمپوزیت شیشه اپوکسی در آباکوس پرداخته ایم.تمامی اجسام به صورت سه بعدی مدل شده و برای آلومینیوم از معیار دمیج داکتیل به همراه خاصیت الاستیک ...
ادامه نوشته »
در این پکیچ به شبیه سازی فرآیند انفجار به روش آکوستیک در آباکوس برای پدیده های مختلف پرداخته شده است. پکیج مشتمل بر ۴ ویدئو که به صورت قدم به قدم می باشد و هر ویدئو نیز شامل فایل های نرم افزاری مربوطه بوده و دقت نمائید در زمان دانلود ...
ادامه نوشته »
ر این ویدئو به شبیه سازی مرحله به مرحله انفجار به روش اویلری لاگرانژی با استفاده از مفهوم کسر های حجمی در نرم افزار آباکوس پرداخته ایم. انفجار در نزدیکی یک دیوار فولادی اتفاق می افتد که دیوار به صورت لاگرانژی مدل شده و برای آن از متریال مدل مناسب ...
ادامه نوشته »
In this English video Elerian Lagrangian explosion over steel wall by using volume fraction concept has been investigated.The explosion happened near a lagrangian steel wall. For modeling wall behavior under huge explosion pressure elastic, plastic and damage with evolution has been implanted. TNT and Air are modeled by JWL and ...
ادامه نوشته »
In this English video you will learn Eulerian-Lagrangin Explosion modeling step by step in Abaqus. Explosion happened over concrete wall and wall modeled with JC material as lagrangian part.TNT and Air modeled as a eulerian parts and for TNT JWL equations and for air Us-Up has been used. For modeling ...
ادامه نوشته »
This file contains Twelve CAE,INP and Persian videos(or English if you order) of Air Blast simulation in ABAQUS about various subjects.You can find each file individually in my site but you can provide it here completely by a cheaper price. These subject are listed at bellow Simulation air blast explosions ...
ادامه نوشته »
In this file Acoustic Explosion(UNDEX) for some phenomenon in Abaqus has been done. The file contain four CAE,INP and persian videos.When you buy this file you will have four download links for each file as a separate link and use click right for all of them. open each file in the ...
ادامه نوشته »
In this file you will have ten simulation of various subjects in ABAQUS base on SPH(Smooth Particle Hdrodynamic) analysis.When you provide the file you will have ten download link and you should use click right for each of the and open them on the new page and download the video ...
ادامه نوشته »
این فایل که به صورت پکیج انفجار در هوا در نرم افزار آباکوس تهیه شده است شامل فایل های زیر می باشد. ۱-شبیه سازی بار انفجاری روی سازه های نوین(پنل ساندویچی) در آباکوس ۲-ویدئو شبیه سازی مرحله به مرحله انفجار رو دیوار بتنی(مدلCDP) با روش کانوپ ۳-ویدئو شبیه سازی قدم ...
ادامه نوشته »
This file contains more than Twenty CAE files and nine English videos and eleven Persian videos of many advanced simulations in ABAQUS software. You can see the bellow list of the simulation subjects Simulation impact balloon filed with gas to the net Simulation blast explosion over concrete slab with brittle ...
ادامه نوشته »
در این ویدئو به شبیه سازی یک دیواره بتنی که تا نیمه در خاک قرار دارد تحث اثر انفجار به روش اویلری پرداخته ایم. دیواره به صورت سه بعدی و لاگرانژی و ماده تی ان تی و خاک و هوا به صورت اویلری مدل گردیده شده اند. برای بتن از ...
ادامه نوشته »
This file contain CAE and full English video of Under water Eulerian explosion in the depth of water in ABAQUS step by step.With the increased world tension, terrorist bombing attacks or accidental explosions are becoming a large threat to infra-structure such as the important economic, military and civilian facilities. The ...
ادامه نوشته »
This file contain CAE and full English video of Eulerian explosion in the Lagrangian pipe in ABAQUS step by step.An explosive detonated in water is a rapid chemical reaction in a substance, which instantly converts the original material into hot explosion gas with a temperature of approximately 3000C and induces ...
ادامه نوشته »
In this video you can see Simulation blast loading over concrete slab in Abaqus step by step. Concrete is modeled as lagrangian part with Johnson-Cook material plasticity and damage to predict fracture area in slab. JH material is appropriate for blast analysis and high speed deformation. For blast modeling CONWEP ...
ادامه نوشته »
This video explains Explosive(impact)welding between two pipe in Abaqus step by step. The internal pipe or flyer pipe made of Titanium and the external pipe or base pipe made of steel.Two pipe has modeled as axisymmetric part and TNT like them. For modeling TNT behavior JWL equation of state has ...
ادامه نوشته »
In this video you can see Simulation blast loading over concrete slab reinforced by composite layers in Abaqus step by step.With the increased world tension, terrorist bombing attacks or accidental explosions are becoming a large threat to infra-structure such as the important economic, military and civilian facilities. The research on ...
ادامه نوشته »
In this video you will see a step by step video of high velocity impact on to the concrete wall in Abaqus. Bullet modeled as a lagrangian part . For modeling concrete behavior under the impact JHC material has been use. During the analysis bullet penetrate into the concrete wall ...
ادامه نوشته »
This is a full English video demonstrates the usage of CONWEP blast loading using Abaqus/Explicit over the concrete slab. Concrete modeled as lagrangian part. For modeling behavior of concrete slab Brittle material model has been used. During the analysis TNT waves pressure causes huge stresses on the concrete slab and create ...
ادامه نوشته »
In this tutorial simulation CEL( Couple EulerianLagrangian) explosion over the concrete wall has been investigated. .TNT and Air are modeled as a Eulerian parts and Concrete as a Lagrangian part. To model TNT behavior JWL equation of state and to model air behavior Us-Up equation has been used. The JWL ...
ادامه نوشته »
This is English video of simulation Eulerian Explosion in the water near concrete dam in Abaqus. TNT and Water has modeled as Eulerian parts and concrete dam with Lagrangian method. Form modeling TNT behavior JWL equation of stat and for water Us-Up equation has been implanted. For concrete CDP (concrete ...
ادامه نوشته »
This is a full English video demonstrates the usage of CONWEP blast loading using Abaqus/Explicit over the Concrete slab.Concrete was modeled by Concrete Damage Plasticity .By using CDP material model tensile and compressive damage can be investigated. Dynamic explicit step was used. Air Blast method was used for the simulation. ...
ادامه نوشته »
آموزش آباکوس از مقدماتی تا پیشرفته/شبیه سازی در آباکوس/فیلم های آموزشی آباکوس آموزش آباکوس/ مقدماتی تا پیشرفته/شبیه سازی پدیده های مختلف در آباکوس/دانلود ویدئوهای آموزشی آباکوس