تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: abaqus (صفحه 14)

بایگانی برچسب: abaqus

Simulation and modelling of rock breakage process by TBM rolling cutters in Abaqus

The tunnel boring machine (TBM) has been extensively adopted in tunneling constructions, due to its rapid advance rate, high efficiency, nice tunnel formation and little impact on the surrounding environment and security. The modern era of tunnel boring machines was born in the early 1950s. Since Robbins (1987) summarized the ...

ادامه نوشته »

شبیه سازی شکستن سنگ با یک جسم دوار برنده در نرم افزار آباکوس

در این ویدئو به شبیه سازی تکه برداری و شکستن سنگ با استفاده از یک جسم دوار برنده در نرم افزار آباکوس پرداخته ایم. مدلسازی اجزا به صورت سه بعدی بوده و برای این آنالیز می توان از هر سه روش لاگرانژی، اویلری و اس پی اچ استفاده نمود که ...

ادامه نوشته »

Simulation blast explosion analysis over sandwich panels (GFRP) in Abaqus

Honeycomb sandwich structures are broadly used in the aerospace and automotive industries, particularly as energy-absorption materials, and there are limited applications in civil infrastructure, such as highway bridges and building construction. Due to their unique and advantageous properties such as high mechanical performance per unit weight and high energy-absorption capability, ...

ادامه نوشته »

شبیه سازی انفجار روی یک ساندویچ پنل با هسته مشبک(GFRP) در نرم افزار آباکوس

در این ویدئو به شبیه سازی قدم به قدم انفجار روی یک ساندویچ پنل با هسته مشبک(GFRP) در نرم افزار آباکوس  پرداخته ایم. سازه های کامپوزیتی از قبیل ساندویچ پنل ها و … به دلیل سبک بودن و نسبت وزن پایین به مقاومت بالا در راستای به کارگیری الیاف بسیار حائز ...

ادامه نوشته »

Simulation Composite Behavior of Concrete Board Covered Light Steel Floors under Flexure

The basic idea in composite construction is to use the advantages of both steel and concrete materials while avoiding their inherent disadvantages. In order for this idea to work, steel and concrete parts should be fully connected so that no delamination and/or slip can occur between the two parts. This ...

ادامه نوشته »

شبیه سازی خمش چهار نقطه ای یک سازه کامپوزیتی کف (بتن-استیل ) در نرم افزار آباکوس

در این ویدئو به شبیه سازی قدم به قدم تست خمش چهار نقطه ای یک سازه کامپوزیتی کف (بتن-استیل ) در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل چهار پارت سه بعدی بتن،ورق استیل موج دار،تیر فولادی و جسم صلب می باشد. در شکل زیر می توانید نحوه قرارگیری اجزا را ...

ادامه نوشته »

Simulation air blast load over concrete slab reinforced with CFRP and epoxy glue in Abaqus

Nowadays, a high risk of terrorist attacks is observed. Bombing attacks are the most frequent terrorist activities. Unfortunately, public infrastructure such as airports and railway stations, shopping centres, offices, financial and government institutions are highly exposed to such attacks. There were also several cases of such attacks with thousands of ...

ادامه نوشته »

ٍSimulation Craters produced by underground explosion in Abaqus by using Eulerian method

Tests of crater formation are appropriate tools to study the blast phenomena, the behavior and destructive power of different explosives and the response of soils and rocks under this type of load. The mechanism of crater formation is complex and it is related to the dynamic physical properties of air, ...

ادامه نوشته »

شبیه سازی انفجار در خاک به روش اویلری و بررسی ایجاد گودال در آن در آباکوس

در این ویدئو به شبیه سازی قدم به قدم انفجار در خاک به روش اویلری و بررسی ایجاد گودال در آن در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بود که مجموعه شامل هندسه ی خاک،هوا و تی ان تی می باشد. در نرم افزار آباکوس نمیتوان از ...

ادامه نوشته »

Simulation failure of RC members under close-in blast loading in Abaqus

Blast incidents in recent years show that most of the terrorist attacks on public structures were explosions within short stand-off distances. In this context, columns are the most vulnerable structural components and their failure is the primary cause for progressive collapse in framed structures. On the other hand, many of ...

ادامه نوشته »

شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد در آباکوس- بررسی پارامتر تخریب

در این ویدئو به شبیه سازی قدم به قدم انفجار روی یک تیر بتنی تقویت شده با میلگرد در نر افزار آباکوس- بررسی پارامتر تخریب- پرداخته ایم.برای مدلسازی تیر بتنی از مدل سالید سه بعدی و برای میلگردها که در ماژول متریال به آنها المان تیر یا بیم نسبت داده شده ...

ادامه نوشته »

Simulation and Finite Element Analysis for Subsurface Damage in Glass under ball impact in Abaqus

An understanding of the response of brittle and ductile materials under hyper velocity impact is  required for analysis of the space debris and micro meteoroid impact flux via retrieved spacecraft  surfaces. Brittle material surfaces exposed in Low Earth Orbit include solar arrays and windows.  Laboratory experiments are able to access ...

ادامه نوشته »

شبیه سازی برخورد توپ حاوی گاز به شیشه و بررسی شکست آن در آباکوس

در این ویدئو به شبیه سازی قدم به قدم برخورد توپ حاوی گاز به شیشه و بررسی شکست آن در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و توپ به صورت یک پارت شل و شیشه به صورت سالید مدل شده اند.برای توپ از ماده ای مشابه ...

ادامه نوشته »

Numerical modeling based on coupled Eulerian-Lagrangian approach and experimental investigation of water jet spot welding process

Spot welding is one of the most convenient processes to create a quick and permanent joint between lightweight industrial metallic parts and is an integral part of manufacturing processes especially in auto-motive industry. Currently, electrical resistance welding is the most applied method in spot welding. However it has some limitations. ...

ادامه نوشته »

شبیه سازی اثر واترجت در اتصال دو ورق مسی وآلومینیومی به روش اویلری در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله  اثر واترجت در اتصال دو ورق مسی وآلومینیومی به روش اویلری در نرم افزار آباکوس پرداخته ایم.ورق ها به صورت سه بعدی و تغییرشکل پذیر و آب به صورت اویلری مدل شده اند. برای در نظر گرفتن ماهیت آب در نرم افزار ...

ادامه نوشته »

Numerical simulation of failure modes of concrete gravity dams subjected to underwater explosion in Abaqus

With the increased world tension, terrorist bombing attacks or accidental explosions are becoming a large threat to infra-structure such as the important economic, military and civilian facilities. The research on the antiknock safety of structures has increasingly attracted people’s attention. In order to meet the ever increasing demand for power, ...

ادامه نوشته »

شبیه سازی سد بتنی کوینا تحت انفجار به روش آکوستیک در آباکوس و بررسی تخریب آن

در این ویدئو به شبیه سازی مرحله به مرحله سد بتنی کوینا تحت انفجار به روش آکوستیک و بررسی تخریب آن در نرم افزار آباکوس پرداخته ایم.در این مثال مدلسازی سد و آب به صورت سه بعدی بوده که در شکل زیر می توانید نمایی از قرارگیری اجزا را مشاهده نمائید. ...

ادامه نوشته »

Simulation masonry wall with FRP as reinforcement under pressure ans transverse load in Abaqus

I this tutorial two model of masonry wall has been investigated. The first model without out FRP and the second model with FRP. In the first model Masonry is the oldest structural material still in use for a vast variety of construction. It has been continually employed for differ-ent construction ...

ادامه نوشته »

شبیه سازی دیوار بنایی تقویت شده با اف آر پی در آباکوس تحت بار فشاری و عرضی

در این ویدئو به شبیه سازی  قدم به قدم دیوار بنایی تقویت شده با اف آر پی در آباکوس تحت بار فشاری و عرضی پرداخته ایم.مساله از دو قسمت تشکیل شده است، در قسمت اول نحوه مدلسازی دیوار بنایی و در قسمت دوم اضافه نمودن تقویت کننده اف آر پی به ...

ادامه نوشته »

Simulation rigid impact on granite stone with SPH method in Abaqus- Damage investigation

The material constitutive relationship is not only the conclusion of some regulations summarized from experimental data, but also plays an important role in numerical simulations. It reflects the realistic physical and mechanical properties of materials as much as possible to improve the accuracy of numerical results. At present, various kinds ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به تخته سنگ گرانیتی به روش اس پی اچ در آباکوس

در این ویدئو به شبیه سازی برخورد پرتابه سرعت بالا به تخته سنگ گرانیتی به روش اس پی اچ در نرم افزار آباکوس پرداخته ایم. سنگ های گرانیتی رفتار مهندسی مختلفی را نشان می دهند که ممکن است در عملیات تونل، استخراج معادن، ثبات شیب و استفاده از سنگ به عنوان مصالح ...

ادامه نوشته »

Numerical simulation of high velocity impact on Granite stone in Abaqus and investigate induced damage

The material constitutive relationship is not only the conclusion of some regulations summarized from experimental data, but also plays an important role in numerical simulations. It reflects the realistic physical and mechanical properties of materials as much as possible to improve the accuracy of numerical results. At present, various kinds ...

ادامه نوشته »

شبیه سازی برخورد سرعت بالا به صفحه سنگی(گرانیت) و بررسی آسیب آن در آباکوس

در این ویدئو به شبیه سازی برخورد سرعت بالای یک پرتابه به صفحه سنگی(گرانیت) و بررسی آسیب بوجود آمده در  آن در نرم افزار آباکوس پرداخته ایم. سنگ گرانیت از جمله مواد ترد بوده که برای مدلسازی آن ،آباکوس چندین متریال مدل مختلف را در  محیط CAE,INP و در قالب سابروتین ...

ادامه نوشته »

micro modeling of masonry wall(brick wall) in Abaqus and investigation Rocking mode fracture

Masonry is the oldest structural material still in use for a vast variety of construction. It has been continually employed for differ-ent construction purposes. Old masonry structures were designed and constructed without any complicated mathematics, but through the expert masons with trial and error methods. In the last few decades ...

ادامه نوشته »

شبیه سازی دیوار آجری با مصالح بنایی در نرم افزار آباکوس- میکرو مدل

در این ویدئو به شبیه سازی دیوار آجری با مصالح بنایی در نرم افزار آباکوس- میکرو مدل  پرداخته ایم. برای مدلسازی از فضای سه بعدی استفاده و متریال برای آجر و تیر بتنی بالا و پایین دیوار به صورت الاستیک در نظر گرفته شده است.  در خصوص مدلسازی دیوار های بنایی ...

ادامه نوشته »

Investigating thermal mixing and reverse flow characteristics in a T-junction using CFD methodology in Abaqus

T-junctions are commonly used in piping systems and multi-channel networks in various industries, including petrochemical plants, electronic cooling applications, molecular biological processes, power plants, etc. It is crucial to comprehensively understand the thermal–hydraulic characteristics in a T-junction for piping design. Many simulations using computational fluid dynamics (CFD) with different turbulence ...

ادامه نوشته »

Simulation embankment and excavation on saturate soil in Abaqus

In this tutorial Simulation embankment and excavation on saturate soil in Abaqus has been investigated. Two dimensional space to model ground and embankment as shell part is used. Because of humidity , in property modulus permeability constant ,elasticity,and Colomb  plasticity has been implanted.You can see a schematic of position at below ...

ادامه نوشته »

شبیه سازی احداث خاکریز و گودبرداری در خاک مرطوب در نرم افزار آباکوس

در این ویدئو به شبیه سازی احداث خاکریز و گودبرداری در خاک مرطوب در نرم افزار آباکوس پرداخته ایم. برای مدلسازی از فضای دوبعدی استفاده و پارت خاک و خاکریز به صورت جداگانه ایجاد شده اند. در این مثال خاک به صورت مرطوب فرض شده و به همین دلیل باید اثرات ...

ادامه نوشته »

numerical simulation of blast resistance of square CFDST columns with steel-fibre reinforced concrete in Abaqus

As a result of the ever increasing threat of terrorist activity, countless effort has been made to mitigate blast effect on structures so that they can withstand more severe explosion accidents without catastrophic failure, thus to reduce the number of human casualties. Indirect means such as using blast barrier to ...

ادامه نوشته »

شبیه سازی انفجار روی یک ستون دو پوسته ای فولادی پر شده با بتن(CFDST) با متریال مدل هلمکوئیست جانسون در آباکوس

در این ویدئو به شبیه سازی قدم به قدم انفجار روی یک ستون دو پوسته ای فولادی پر شده با بتن با متریال مدل هلمکوئیست جانسون در نرم افزار آباکوس پرداخته ایم.در این مسئله ستون به صورت دو قوطی داخلی و بیرونی با استفاده از دو پارت سالید مدل و ماده ...

ادامه نوشته »

numerical studies on corrugated sandwich panels under crushing loading in Abaqus

Nowadays lightweight and higher performances place increasing importance to design quality, and both become the critical issues confronted in engineering field. Take transportation industry as an example, there have been a broad range of studies reported on thin-walled structures,in which the plastic deformation is commonly used to absorb majority of ...

ادامه نوشته »

شبیه سازی مچالگی ساندویچ پنل تحت اثر بار فشاری در آباکوس

در این ویدئو به شبیه سازی مچالگی ساندویچ پنل تحت اثر بار فشاری در نرم افزار آباکوس پرداخته ایم.  پنل های ساندویچی به طور گسترده در صنعت هوا و فضا،صنایع دریایی و ساخت و تولید به کار می رود. از نقطه نظر ایمنی این سازه ها می توانند در مقابل برخورد ...

ادامه نوشته »

Simulation and numerical modeling of orthogonal cutting of cortical bone in Abaqus

Cutting of bone is a common operation in orthopedic traumatologic surgery and dentistry. Cutting operations in bones involve a wide range of operations including grinding, sawing or drilling, see for instance.It is well known in the field of manufacturing the importance of proper definition of machining operations for process efficiency ...

ادامه نوشته »

شبیه سازی برش استخوان و برداده برداری از آن به روش اویلری در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله برش استخوان و براده برداری از آن به روش اویلری در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و برای مدلسازی این مساله سه پارت کاتر، استخوان و محیط اویلری به صورت سه بعدی تعریف شده اند. ...

ادامه نوشته »

Simulation crack growth in concrete containing wood shavings as aggregates in Abaqus

The critical mechanical characteristics governing the usability of concrete containing wood shavings as aggregates are mechanical strength and durability.There is a renewed interest in the use of wood-based composite materials because of their ability to regulate indoor climate. Numerous studies have shown that the hygroscopic behavior of materials of vegetable ...

ادامه نوشته »

شبیه سازی رشد ترک در یک تیر(مخلوط بتن و خاک اره یا چوب) به روش XFEM در آباکوس

در این ویدئو به شبیه سازی رشد ترک در یک تیر(مخلوط بتن و خاک اره یا چوب) به روش XFEM در آباکوس در نرم افزار آباکوس پرداخته ایم. تیر به صورت سه بعدی مدل شده و تحت خمش سه نقطه ای قرار گرفته است . برای ایجاد جسم متحرک  نیز یک ...

ادامه نوشته »

Simulation air blast explosion over sandwich plate(steel-Epoxy glass) in Abaqus

In this video Simulation air blast explosion over sandwich plate(steel-Epoxy glass) in Abaqus has been investigated.In this example two steel plates as solid part with four epoxy glass layers as continuum shell part are used . Composite section is placed inside two steel plates. You can see a schematic and position ...

ادامه نوشته »

Simulation Cold Spray process in Abaqus by using ALE method

In this tutorial Simulation Cols Spray process in Abaqus by using ALE method has been investigated. In Cold Spray, powder particles (typically 10 to 40 µm) are accelerated to very high velocities (200 to 1200 m.s-1) by a supersonic compressed gas jet at temperatures below their melting point. Upon impact with the ...

ادامه نوشته »

شبیه سازی فرآیند پاشش سرد یک قطعه آلومینیومی در آباکوس با روش ALE

در این ویدئو به شبیه سازی قدم به قدم  فرآیند پاشش سرد یک قطعه آلومینیومی در آباکوس با روش ALE در نرم افزار آباکوس پرداخته ایم.مواد اولیه مورد استفاده در این فرآیند، به شکل پودر، سیم یا میله می‌باشد.ذرات ماده پوششی توسط یک گاز خنثی (آرگون، هلیوم، ازت ویا مخلوطی از ...

ادامه نوشته »

Simulation rigid impact on CFRP plates in Abaqus

The use of composite materials in critical aerospace structures is still limited by their relatively weak mechanical response to impact events. In addition, composite laminates subjected to low velocity impact such as dropped tools or vehicle impact, exhibit significant internal damage and delamination, with little indication on the impact surface ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به صفحات کامپوزیتی CFRP در نرم افزار آباکوس

در این ویدئو به شبیه سازی برخورد جسم صلب به صفحات کامپوزیتی CFRP در نرم افزار آباکوس پرداخته ایم.الیاف کربن نخستین بار در سال ۱۸۷۹ میلادی زمانی که ادیسون از این ماده به عنوان رشته پر مقاومت در ایجاد روشنایی الکتریکی استفاده کرد، پای به عرصه علم گذاشت. در آغاز دهه ...

ادامه نوشته »

Numerical simulation of water mitigation effects on blast wave in Abaqus by using Eulerian method

The erection of a water wall around an explosive has been found to be an effective method of mitigating the effect of shock wave and blast pressure of an accidental explosion. Essentially, the high-pressure shock wave produced by detonation aerosolizes the water placed close to explosive and causes both a ...

ادامه نوشته »

شبیه سازی اثر آب در کاهش موج انفجار به روش اویلری در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله اثر آب در کاهش موج انفجار به روش اویلری در نرم افزار آباکوس پرداخته ایم. در شکل زیر میتوانید نمونه واقعی این مساله را مشاهده نمائید. مدلسازی به صورت سه بعدی بوده و برای آب از معادله حالت و برای تی ان ...

ادامه نوشته »

Simulation of the Cold Spray Particle Deposition Process in Abaqus by using CEL method

In recent years, a significant number of studies have been dedicated to the modeling of impact dynamics. For very low-speed impact, such as in the shot peening metal working process, the semi-analytical method can be used for the modeling of both thick (half-space assumption) and thin (finite-depth) structures.In the case ...

ادامه نوشته »

شبیه سازی فرآیند پاشش سرد یا Cold Spray در آباکوس به روش کوپل اویلری لاگرانژی

در این ویدئو به شبیه سازی قدم به قدم فرآیند پاشش سرد یا Cold Spray در نرم افزار آباکوس پرداخته ایم.فرآیند پاشش سرد( Cold spray) یکی از جدید ترین روش های پوشش دهی است که در آن ذرات پودر ماده در حالت جامد توسط گازهای گرم فشرده شده، شتاب می ...

ادامه نوشته »

Simulation an Eulerian approach to soil impact analysis for crashworthiness applications

The primary motivation of this study was the development and implementation of an explicit nonlin-ear dynamic finite element based methodology for investigating the crashworthiness of small lightweight rigid impacting into soft soil.The crash dynamics of aircraft are highly dependent on the characteristics of the impact terrain, as different terrains produce ...

ادامه نوشته »

شبیه سازی برخورد یک جسم صلب به توده خاک و بررسی گودال ایجاد شده بر اثر آن در آباکوس

در این ویدئو به شبیه سازی قدم به قدم  برخورد یک جسم صلب به توده خاک و بررسی گودال ایجاد شده بر اثر آن در نرم افزار آباکوس پرداخته ایم. در این مثال از فضای سه بعدی استفاده و پرتابه به صورت ریجید و توده خاک به صورت یک پارت اویلری ...

ادامه نوشته »

Simulation coupled acoustic–structural response of hull subject to underwater explosion in ABAQUS

One of the major problems confronted by the designer of submersibles is to minimize the weight of the pressure hull for increasing the payload of a crew and necessary equipment and to simultaneously enhance the strength of the pressure hull for withstanding hydrostatical pressure, underwater explosive loading and other environmental ...

ادامه نوشته »

شبیه سازی انفجار زیر آب روی یک استوانه (Hull) در نرم افزار آباکوس به روش UNDEX

انفجار زیر آب undex را می توان به دو بخش تقسیم کرد که شامل موج شوک (Shock Wave) و نوسان حباب (Bubble) است که هر دو باعث ایجاد شکست و آسیب در سازه ها می گردند. البته مکانیزم آسیب آن ها متفاوت است. اصولا مقدار فشار ناشی از موج شوک ...

ادامه نوشته »

Simulation blast loading over sandwich panel(GFRP+Foam) in Abaqus by using CONWEP model

In this simulation the air-blast response of sandwich panels with composite face sheets (GFRP) and foam cores has been investigated.Sandwich panels based on two relatively stiff face sheets separated by a foam core are commonplace in the marine industry.for example in surfboard and yacht construction. Lightweight sandwich materials are attractive options for ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo