تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: abaqus three point bending simulation

بایگانی برچسب: abaqus three point bending simulation

Simulation dynamic four points bending of the timber wood beam reinfroced with CFRP rod and Glue in Abaqus

In this tutorial, the Simulation dynamic four points bending of the timber wood beam reinfroced with CFRP rod and Gluein Abaqus  has been investigated. The wood beam is modeled as a three-dimensional solid part with two compression and tension sections. The adhesive and CFRP rod also is modeled as three-dimensional ...

ادامه نوشته »

Simulation bending test of the UHPFRC beam reinforced with BFRP lamina in Abaqus

In this tutorial, the Simulation bending test of the UHPFRC beam reinforced with BFRP lamina in Abaqus  has been investigated. The UHPFRC beam is modeled as a three-dimensional solid part. The BFRP lamina with eight layers is modeled as a shell part. The steel bars and strips are modeled as ...

ادامه نوشته »

Simulation three point bending of a RC beam reinforced with CFRP in Abaqus

In this tutorial, the Simulation three point bending of a RC beam reinforced with CFRP in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire parts. The CFRP sheet is modeled as a three-dimensional shell ...

ادامه نوشته »

Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus

In this tutorial, the Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The CFRP sheet is model as a three-dimensional shell part. In this tutorial, at the first ...

ادامه نوشته »

Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus

In this tutorial, Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus has been investigated. The ceramic and steel plates are modeled as a three-dimensional solid part. The aluminum core with honeycomb shape is modeled as a three-dimensional shell part. Three rigid bodies are used to define hydraulic ...

ادامه نوشته »

Simulation flexural response of aluminium alloy profile in Abaqus- Damage investigation

In this tutorial, the Simulation flexural response of aluminum alloy profile in Abaqus- Damage investigation- has been studied. Aluminum alloys are used across a range of structural engineering applications, with square and rectangular hollow sections being a popular cross-section shape. This can be particularly beneficial for enhancing resistance to local ...

ادامه نوشته »

numerical simulation of an aluminium-concrete beam in Abaqus

In this tutorial, An numerical simulation of an aluminum-concrete beam in Abaqus has been investigated. Contemporary designers should look for new solutions supporting sustainable construction. Aluminium-concrete composite structures have a lot of applications thanks to the corrosion-resistance and lightness of the aluminum beam. They may be used in composite bridges[4,5,6,7] ...

ادامه نوشته »

Flexural Behavior of Concrete Filled Square Steel Tube with Inner CFRP Circular Tube in Abaqus

In this tutorial, Flexural Behavior of Concrete Filled Square Steel Tube with Inner CFRP Circular Tube in Abaqus has been studied. Owing to the development of concrete technology and the demand of practical engineering, high strength concrete has been widely used in construction. The weakness of high strength concrete is ...

ادامه نوشته »

Simulation steel pipe reinforcement with CFRP layouts in Abaqus under three points bending

In this tutorial Simulation steel pipe reinforcement with CFRP layouts in Abaqus under three points bending has been studied. Circular hollow section (CHS) are widely used in many applications but predominantly used as pipelines in the oil and gas industry. Natural resources like oil and gas constitute the major share ...

ادامه نوشته »

Finite element modeling of reinforced concrete beams externally strengthened in flexure with side-bonded CFRP laminates in Abaqus

In this tutorial Finite element modeling of reinforced concrete beams externally strengthened in flexure with side-bonded CFRP laminates in Abaqus has been done. The concrete beam and epoxy glue are modeled as three dimensional part,the CFRP is modeled as three dimensional shell part,the bar is modeled as three dimensional wire ...

ادامه نوشته »

An numerical simulation of an aluminium-concrete beam with steel connectors under four point bending load

This tutorial presents a numerical analysis of the resistance and stiffness of an aluminium-concrete beam with steel connectors.  Aluminium-concrete structures are less known than steel and concrete composite structures, they do, however, have a lot of  applications.Contemporary designers should look for new solutions supporting sustainable construction.Aluminium-concrete composite structures have a ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo