In this tutorial, the Simulation air blast over a composite panel( Glass Epoxy-Ceramic-thermoplastic polyurethane) in Abaqus has been done. The epoxy glass composite part is modeled as a three-dimensional shell part with sixteen layers. The ceramic and polyurethane are modeled as three-dimensionalsolid part. You can see a figure of the ...
ادامه نوشته »
In this tutorial, the Simulation dynamic four point bending test of a Gravity beam in Abaqus has been investigated. Gravity Beams, a term coined in this investigation, are those beams in which gravity is used to design the topology of beam form conjointly with the novel manufacturing strategy Fabric Formwork. ...
ادامه نوشته »
In this tutorial, the Numerical Investigation of Rigid Impact on Steel Wire Reinforced Foam Core/Composite Skin Sandwich Panel in Abaqus software has been investigated. The rigid projectile is modeled as the three-dimensional shell part. The steel reinforcements are modeled as wire part. The glass-epoxy part is modeled as a three-dimensional ...
ادامه نوشته »
In this tutorial, Simulation low energy impact of a rigid hammer on the wood-cement-concrete panel in Abaqus has been investigated. The panel contians three layers, top layer is wood-cement part as a soild model, the second layer is normal strenght concrete as a solid part, and third layer is wood-cement ...
ادامه نوشته »
In this tutorial the Simulation rocket impact and explosion over a concrete panel in Abaqus has been investigated. The concrete panel is modeled as a three-dimensional solid part. The rocket is modeled as a three-dimensional shell part, and the TNT is modeeld as a solid part. You can see a ...
ادامه نوشته »
In this tutorial, the Simulation air blast load over a composite panel(Aluminum+bamboo fiber) in Abaqus has been investigated. Because of the symmetry circumstance, one quarter of the geometries are modeled. The aluminum plates are modeled as three-dimensional solid part. The bamboo plate as a core of the composite panel is ...
ادامه نوشته »
In this tutorial, the Simulation four point bending test of a foamed concrete beam reinforced with steel bars and bamboo fiber in Abaqus has been investigated. The foamed concrete part is modeled as a three-dimensional solid part. The bamboo composite is modeled as a three-dimensional shell part with some layers. ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over a steel-UHPC-steel sandwich composite beam stud connectors in Abaqus has been studied. The two steel plates with studs are modeled as three-dimensional solid part. The UHPC is modeled as a three-dimensional solid part as a core of the sandwich beam. You ...
ادامه نوشته »
In this tutorial, the Simulation high-velocity impact on the Aluminum-Bamboo sandwich panel in Abaqus has been done. The aluminum plate is modeled as a three-dimensional solid part. The bamboo plate is modeled as a shell part with thirty two layers with different fiber angle. The projectile is modeled as a ...
ادامه نوشته »
In this tutorial, the Simulation dynamic bending test of SCS sandwich beams with UHPFRC in Abaqus has been investigated. The upper and bottom steel plates with studs are modeled as three-dimensional solid part. The middle UHPFRC is modeled as a three-dimensional solid part. You can see a figure of the ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over a timber wood beam reinforced with CFRP in Abaqus has been investigated. The two wood beam layers are modeled as three-dimensional solid parts. The CFRP sheet is modeled as a three dimensional shell part. You can see a figure of the ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار روی یک تیر چوبی دولایه تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. مدل سازی شامل دو لایه چوب به صورت سالید و سه بعدی، یک لایه ورق کامپوزیتی به صورت شل و سه بعدی که به صورت چند لایه ...
ادامه نوشته »
In this tutorial, the Simulation low energy impact on the multilayered wood panel in Abaqus-Damage investigation – has been done. The rigid ball is modeled as a three-dimensional shell part with a specific mass. Each wood panel is modeled as a three-dimensional solid part, and between the layers, the cohesive ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی برخورد کم انرژی به پنل چوبی چندلایه در آباکوس- بررسی آسیب- پرداخته ایم. مدل سازی شامل یک پرتابه صلب و چهار لایه چوب می باشد. لایه های چوب به صورت جداگانه و به صورت سالید مدل شده اند. برای مدلسازی رفتار بین لایه ...
ادامه نوشته »
In this tutorial, the Simulation cyclic loading of a steel beam embedded in a concrete block in Abaqus has been done. The steel beam (or column) is modeled as a three-dimensional shell part. The concrete block is modeled as a three-dimensional solid part. The half of the steel beam is ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی بارگذاری سیکلی تیر فولادی تا نیمه مدفون در بتن در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل یک تیر فولادی به صورت شل(یا سالید)، و پایه بتنی به صورت سالید می باشد. تیر تا نیمه در بتن ...
ادامه نوشته »
In this tutorial, the Simulation inpact spot welding of two steel plates in Abaqus has been done. The steel flyer and base plates are modeled as three-dimensional solid part. The rigid impactor is modeled as three-dimensional shell part. You can see a figure of the assembled parts below Due to ...
ادامه نوشته »
In this tutorial, the Simulation dynamic four points bending of the timber wood beam reinfroced with CFRP rod and Gluein Abaqus has been investigated. The wood beam is modeled as a three-dimensional solid part with two compression and tension sections. The adhesive and CFRP rod also is modeled as three-dimensional ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی خمش دینامیکی چهار نقطه ای تیر چوبی تقویت شده با چسب و میلگرد CFRP در آباکوس پرداخته ایم. مدلسازی شامل تیر چوبی دو بخشی( قسمت رویی در فشار و قسمت زیرین در کشش) به صورت سالید و سه بعدی، هندسه چسب به صورت ...
ادامه نوشته »
With the growing threat and risk of attacks and explosions in densely populated urban environments, the need for advanced security glass in windows, doors, police protective galss shield, and glass partitions is also increasing. In a powerful explosion, conventional glass panes will splinter even at a great distance from the ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار در نزدیکی محافظ شیشه ای در آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل هندسه شیشه محافظ می باشد که محل انفجار همانطور که در شکل زیر نمایش داده شده، در فاصله نزدیکی از آن قرار دارد. هدف ...
ادامه نوشته »
In this tutorial, the Numerical simulation of interlocking blocks under compression in Abaqus has been done. The blocks are modeled as three dimensional solid parts with interlocking surfaces. You can see a figure of the assembled parts below Masonry structure is one of the most predominant structures throughout the world ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی تست فشار آجرهای به هم پیوسته(Interlocking) با تعریف تماس چسبنده در آباکوس پرداخته ایم. ستون آجرهای در هم تنیده به صورت سالید و سه بعدی طراحی شده اند، که تعداد آنها و نحوه در هم تنیدگی می تواند متفاوت باشد. ملات بین آجرها ...
ادامه نوشته »
In this tutorial the Simulation Wood-Glue-CFRP beam under dynamic four points bending test in Abaqus has been investigated. The wood beam are modeled as three dimensional solid part, the adhesive parts are modeled as three-dimensional solid parts, the CFRP also si solid and the the roller are modeled as rigid ...
ادامه نوشته »
In this tutorial, the Simulation sequential CEL explosion in the depth of soil over the RC slab in Abaqus has been investigated. The concrete slab is modeled as three-dimensional solid part, the steel reinforcement is modeled as wire part. The Soil, and TNT are modeled as three-dimensional solid parts. The ...
ادامه نوشته »
In this tutorial, the Simulation UHPFRC beam with initial void reinforced with CFRP rod and Expoxy under dynamic bending has been investigated. The concrete beam, CFRP rod, epoxy glu are modeled as three-dimensional solid parts. Two rigid body as a hydraulic jacks also are modeled. You can see a figure ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion in the depth of water near the aluminum hull in Abaqus- three sea mine explosion- has been done. The domain is modeled as a three-dimension Eurlerian part. The hull is modeled as a three-dimensional shell part. The water and three TNT parts are ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over the rebberized concrete column reinforced with green composite in Abaqus has been done. The rubberized concrete column is modeled as a three-dimensional solid part. The green composite with some layers is modeled as a three-dimensional shell part. The steel reinforcements are ...
ادامه نوشته »
In this tutorial, the Simulation dynamic bending test of a rubberized concrete beam reinforced with green composite in abaqus has been investigated. The rubberized concrete beam is modeled as a three-diensional solid part. The green composite is modeled as a three-dimensional shell part with four layups. The steel bas and ...
ادامه نوشته »
In this tutorial the Simulation ballistic impact of steel bullet to the ceramic panel reinfroced with Green Composite has been investigated. The bullet is modeled as a three-dimensional solid part, the ceramic panel as a solid part, and the green composite as a three-dimensional shell part. You can see a ...
ادامه نوشته »
In this tutorial the explosion simulation near the reinforced concrete wall with green composite-SPH method- has been investigated. The TNT part is modeled as a three-dimensional solid part. The concrete wall or slab is modeled as three-dimensional solid part, the green composite part with eight layers is modeld as three-dimensional ...
ادامه نوشته »
In this tutorial the Simulatio bird strike impact with SPH method to the composite blade in Abaqus has been investigated. The bird is modeled as the three-dimension solid part. The composite blade with eight layers is modeled as three-dimensional shell part. You can see a figure of the assembled parts ...
ادامه نوشته »
In this tutorial the Simulation CEL explosion inside the CFRP composite vessel in Abaqus has been investigated. The CFRP vessel is modeled as a three-dimensional shell part in sixteen layers with different oreintation. The TNT part is modeled as a three-dimensional solid part. The surounding is modeled as an Eurlerian ...
ادامه نوشته »
In this tutorial the Simulation low energy impact on the concrete slab with pre tensioned bars reinforced with GFRP in Abaqus has been studeid. Concrete is modeled as a three-dimensional solid part. The GFRP part is model as plannar shell part. The steel basrs are modeled as three-dimensional wire part ...
ادامه نوشته »
In this tutorial the Simulation CFRP water storage tank under close air blast explosion in Abaqus has been investigaed. The CFRP tank is modeled as a three-dimensional shell part. The water is modeled as solid part and it’ll used as reference volume in load section to define the amount and ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار به روش اویلری در نزدیکی یک مخزن کامپوزیتی حاوی آب در آباکوس و بررسی آسیب مخزن پرداخته ایم. مخزن کامپوزیتی به صورت یک استوانه شل سه بعدی طراحی شده است. هندسه آب به صورت یک جسم سالید سه بعدی و همچنین فضای ...
ادامه نوشته »
In this tutorial the Simulation internal explosion of a pipe with steel supporters in Abaqus has been investigated. The steel pipe is modeled as three-dimensional solid part, it can also be shell part. The upper and bottom supports are modeled as three-dimensional solid part. You can see a figure of ...
ادامه نوشته »
This tutorial investigates a Simulation air blast explosion test over a reinforced UHPC- Damage analysis. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part. The embedded bars and strips parts are modeled as a three-dimensional wire part. You can see a figure of the assembled parts below The UHPC ...
ادامه نوشته »
In this tutorial, the Simulation of steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation has been investigated. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part, the embedded beam parts are modeled as a three-dimensional wire part, and finally, the steel projectile is modeled as a solid part. ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی برخورد پرتابه سرعت بالا به پنل بتنی فوق توانمند در آباکوس- بررسی تخریب- پرداخته ایم. مدلسازی شامل دال بتنی فوق توانمند به صورت سه بعدی و تغییر شکلپذیر، دو لایه میلگرد به صورت سه بعدی و سیمی، و جسم ضربه زننده فولادی به ...
ادامه نوشته »
In this full lecture through eighteen tutorials with more than ten hours duration time, all aspects of welding are investigated. Each tutorial contains cae, inp, step-by-step English video, Fortran code, and papers. The lecture includes some subjects like Friction Stir Welding(Aluminum plates, steel plates, copper plates with CEL, ALE, and ...
ادامه نوشته »
In this package, the high and low-velocity impacts are investigated through 40 step-by-step tutorials for more than 20 hours. Through those 40 separated simulations, all aspects of the impact and collision are studied. Each tutorial contains cae, inp, step-by-step English video, and papers, also some of them have codes. Impact ...
ادامه نوشته »
In this lecture through ten step-by-step tutorials, many aspects of the crack growth like XFEMm H integral, and … in concrete, steel, dam, bone, and…are investigated. All the tutorials are explained from A to Z, each tutorial contains cae, inp, and step-by-step English video. All the tutorials in the package ...
ادامه نوشته »
در این پکیج آموزشی در قالب ۱۵ مثال کاربردی سعی گردیده شده است تا تمامی جوانب رشد ترک به روش های مختلف تشرریح و توضیح داده شود. در هر مثال از پکیج رشد ترک در ماده خاصی به صورت سه بعدی و یا دوبعدی در نظر گرفته شده است. مثالهای ...
ادامه نوشته »
در این پکیج آموزشی تمامی مسائل مربوط به جوشی ذوبی،مقاومتی و انفجاری موجود در سایت در قالب ۱۹ مثال جداگانه قرار داده شده است. مثال ها به صورت قدم به قدم بوده و تمامی انواع مهم جوش را مورد بررسی قرار داده است. تمامی مثالها به صورت تکی در سایت ...
ادامه نوشته »
در این پکیج سعی بر این بوده که مسائل مختلفی مربوط به تحلیل های سازه ای بتن( انواع بتن) گنجانده شود. مسائلی مربوط به تیر،ستون، اتصالات، بارگذاری تکراری، برخورد تکراری،بتن فوق توانمند و الیافی، مسائل مربوط به آسیب، تیرو ستون های کامپوزیت،…در این پکیج در قالب فایل آموزشی قرار داده ...
ادامه نوشته »
In this tutorial, the Simulation steel bullet impact to the armor panel(Ceramic- Aluminum Foam) in Abaqus has been investigated. The steel bullet is modeled as a three-dimensional solid part. The ceramic and aluminum foam are modeled as three-dimensional solid parts. Because of the symmetry conditions, one-quarter of the whole model ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی برخورد گلوله فولادی به پنل مرکب سرامیک-فوم آلمینیوم در نرم افزار آباکوس پرداخته ایم. هدف از این شبیه سازی بررسی تخریب هدف و گلوله در اثر سرعت بالای برخورد می باشد. گلوله فولادی به صورت سه بعدی و تغییر شکلپذیر، لایه رویی سرامیکی ...
ادامه نوشته »
In this tutorial, the Simulation rigid projectile impact to the ceramic-CFRP panel in Abaqus-Damage investigation – has been done. The rigid projectile is modeled as a three-dimensional shell part. The ceramic is modeled as a three-dimensional thick solid part. The CFRP or carbon fiber is modeled as a three-dimensional shell ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی برخورد صلب به یک پنل مرکب سرامیک-CFRP و بررسی تخریب در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل پارت پرتابه صلب به صورت سه بعدی و شل، پارت هدف سرامیکی به صورت یک لایه ضخیم سه بعدی و سالید و در نهایت پارت ...
ادامه نوشته »
آموزش آباکوس از مقدماتی تا پیشرفته/شبیه سازی در آباکوس/فیلم های آموزشی آباکوس آموزش آباکوس/ مقدماتی تا پیشرفته/شبیه سازی پدیده های مختلف در آباکوس/دانلود ویدئوهای آموزشی آباکوس