تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: abaqus composite damage simulation

بایگانی برچسب: abaqus composite damage simulation

Simulation CEL explosion inside the CFRP composite vessel in Abaqus

In this tutorial the Simulation CEL explosion inside the CFRP composite vessel in Abaqus has been investigated. The CFRP vessel is modeled as a three-dimensional shell part in sixteen layers with different oreintation. The TNT part is modeled as a three-dimensional solid part. The surounding is modeled as an Eurlerian ...

ادامه نوشته »

Abaqus full lecture-High and Low-Velocity Impact- More than ten hours of modeling and simulation

In this lecture, the High and Low-velocity impact phenomenon is investigated. The lecture duration is more than ten hours and during that, twenty different models are simulated based on the research paper as a reference for the material. We define the proper material model for each part for instance in ...

ادامه نوشته »

Simulation composite plate connection with steel bolt under tension load in Abaqus

In this tutorial, the Simulation composite plate connection with steel bolt under tension load in Abaqus has been investigated. The two composite plates are modeled as three-dimensional solid parts. The steel bolt is modeled as a three-dimensional solid part. Because of the symmetry, half of the model is used to ...

ادامه نوشته »

Simulation high velocity impact of the steel projectile on the composite panel(Steel-Concrete-Epoxy glass) in Abaqus

In this tutorial, the Simulation high-velocity impact of the steel projectile on the composite panel(Steel-Concrete-Epoxy glass) in Abaqus has been investigated. The steel projectile is modeled as a cylindrical solid part. The steel plate as a first layer of the panel is modeled as a three-dimensional part. The concrete as ...

ادامه نوشته »

Simulation ballistic impact on ceramic titanium composite armor in Abaqus

In this tutorial, the Simulation ballistic impact on the ceramic-titanium-composite armor in Abaqus has been studied. The ceramic, titanium and composite layers are modeled as a three-dimensional solid part. The bullet is modeled as a three-dimensional solid part. You can see a figure of the assembled parts at below The ...

ادامه نوشته »

Numerical simulation of blast resistance of RC slab strengthened with AFRP in Abaqus-Damage investigation

In this tutorial, numerical simulation of blast resistance of RC slab strengthened with AFRP in Abaqus-Damage investigation- has been studied. The concrete slab is modeled as a three-dimensional solid part, the AFRP is modeled as four layers composite with shell part and the embedded beam inside the concrete host is ...

ادامه نوشته »

Simulation High velocity impact of a brass projectile on the Ceramic-Aluminum-Glass fiber in Abaqus

In this tutorial, Simulation High-velocity impact of a brass projectile on the Ceramic-Aluminum-Glass fiber in Abaqus has been investigated. The brass projectile, the ceramic plate, aluminum plate, and epoxy-glass layers are modeled as three-dimensional parts. You can see a figure of the assembled parts at below The brass material is ...

ادامه نوشته »

Simulation steel pipe reinforcement with CFRP layouts in Abaqus under three points bending

In this tutorial Simulation steel pipe reinforcement with CFRP layouts in Abaqus under three points bending has been studied. Circular hollow section (CHS) are widely used in many applications but predominantly used as pipelines in the oil and gas industry. Natural resources like oil and gas constitute the major share ...

ادامه نوشته »

Finite element modeling of reinforced concrete beams externally strengthened in flexure with side-bonded CFRP laminates in Abaqus

In this tutorial Finite element modeling of reinforced concrete beams externally strengthened in flexure with side-bonded CFRP laminates in Abaqus has been done. The concrete beam and epoxy glue are modeled as three dimensional part,the CFRP is modeled as three dimensional shell part,the bar is modeled as three dimensional wire ...

ادامه نوشته »

Simulation low-velocity impact response and damage mechanism of glass fiber aluminium laminates in Abaqus

In this tutorial Simulation low-velocity impact response and damage mechanism of glass fiber aluminium laminates in Abaqus has been studied.Glass fiber aluminium laminate (GLARE) is a kind of fiber metal laminates widely applied in aircraft structures, frequently subjected to low-velocity impact incidents. The purpose of this paper is to investigate ...

ادامه نوشته »

Deformation behavior of multi-layered materials(silicon carbide,steel,aluminium,CFRP) under impact loading in Abaqus

The study of interaction between two impacting bodies, known as impact dynamics or terminal ballistics has many crucial applications. Bullet impact on armor, occupant and pedestrian safety during automobile accidents, tool drop on aircraft wing, are few examples where impact dynamics plays an important role. An in-depth understanding of deformation ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo