تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / اسلاید (صفحه 8)

اسلاید

Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus

In this tutorial, the Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The CFRP sheet is model as a three-dimensional shell part. In this tutorial, at the first ...

ادامه نوشته »

شبیه سازی تقویت تیر بتنی با آسیب و تنش پسماند اولیه با ورق CFRP تحت خمش چهار نقطه ای در آباکوس

در این ویدئوی آموزشی به شبیه سازی تقویت تیر بتنی با آسیب و تنش پسماند اولیه با ورق CFRP تحت خمش چهار نقطه ای در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو پارت تیر بتنی به صورت سه بعدی و سالید و پارت ...

ادامه نوشته »

Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus

In this tutorial, the Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus has been investigated. The ice is modeled as a three-dimensional solid part. The TNT, air, and water are modeled as three-dimensional Eulerian parts. Due to the extremely short reaction time of ...

ادامه نوشته »

شبیه سازی انفجار زیر آب در نزدیکی لایه یخ به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب در نزدیکی لایه یخ به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و در این تحلیل یخ به صورت مدل سالید و سه بعدی، تی ان تی، هوا و آب نیز به ...

ادامه نوشته »

Simulation internal explosion inside the rock by using coupled Eulerian-Lagrangian method in Abaqus

In this tutorial, the Simulation internal explosion inside the rock by using the coupled Eulerian-Lagrangian method in Abaqus has been studied. The rock and TNT are modeled as three-dimensional solid parts. The Eulerian domain is modeled as a three-dimensional Eulerian part. You can see a figure of the assembled parts ...

ادامه نوشته »

شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی درون یک قطعه سنگ در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی درون یک قطعه سنگ در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل سه هندسه می باشد که پارت سنگ به صورت سه بعدی و تغییر شکلپذیر، بارت تی ان تی به صورت سه بعدی و تغییر شکلپذیر و ...

ادامه نوشته »

Simulation drilling hole process in concrete by using a rigid drill tool in Abaqus

In this tutorial, the Simulation drilling hole process in the Abaqus by using a rigid drill tool has been studied.  Concrete drilling, or core drilling, is the process of drilling precise holes in concrete floors or walls, or in any other paved surfaces or structures. The concrete is modeled as a three-dimensional solid part. ...

ادامه نوشته »

شبیه سازی سوراخ کاری بتن با استفاده از مته در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی سوراخ کاری بتن با استفاده از مته در نرم افزار آباکوس پرداخته ایم. بتن به صورت یک پارت سه بعدی و سالید در نظر گرفته شده است. پارت مته به دلیل پیچیدگی هندسه نیاز به طراحی در نرم افزاری مانند سالیدورک دارد، لذا ...

ادامه نوشته »

Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus

In this tutorial, Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus has been investigated. The ceramic and steel plates are modeled as a three-dimensional solid part. The aluminum core with honeycomb shape is modeled as a three-dimensional shell part. Three rigid bodies are used to define hydraulic ...

ادامه نوشته »

شبیه سازی دینامیکی خمش سه نقطه ای پنل مرکب (سرامیک-فولاد-آلمینیوم) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی دینامیکی خمش سه نقطه ای پنل مرکب(سرامیک-فولاد-آلمینیوم) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که مجموعه متشکل از یک صفحه سرامیکی، دولایه ورق فولادی و یک هسته مشبک آلمینیومی می باشد که این مجموعه تحت خمش توسط اجزای ...

ادامه نوشته »

Simulation Pressure Distribution on Subgrade Soil Underlying Geocell Reinforced Foundation Bed in Abaqus

In this tutorial, the Simulation Pressure Distribution on Subgrade Soil Underlying Geocell Reinforced Foundation Bed in Abaqus has been studied. High contact stresses generated in the foundation soil, owing to increased load, causes distress, instability, and large settlements. Present days, geocell reinforcement is being widely used for the performance improvement ...

ادامه نوشته »

شبیه سازی بارگذاری استاتیکی پی خاکی مسلح به ژئوسل در نرم افزار آباکوس

در این ویدئو به شبیه سازی بارگذاری استاتیکی پی خاکی مسلح به ژئوسل در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل دو پارت بوده که هندسه خاک به صورت سه بعدی و تغییر شکلپذیر و هندسه ژئوسل به صورت یک پارت شل سه بعدی طراحی شده اند. در شکل زیر ...

ادامه نوشته »

Simulation CEL explosion on the Ice surface in interaction with water and air in Abaqus

In this tutorial, the Simulation Coupled Eulerian-Lagrangian explosion on the Ice surface in interaction with water and air in Abaqus has been studied. The ice, water, air, and TNT are modeled as a three-dimensional solid part. The domain part is modeled as a three-dimensional Eulerian part. You can see figures ...

ادامه نوشته »

شبیه سازی انفجار به روش اویلری لاگرانژی در سطح لایه یخ(تعامل با هوا-یخ-آب) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار به روش اویلری لاگرانژی در سطح لایه یخ(تعامل با هوا-یخ-آب) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت دامنه یا فضا به صورت سه بعدی و اویلرین، پارت یخ به صورت سه بعدی و سالید، ...

ادامه نوشته »

Simulation sandstone cutting by using a rigid tool in Abaqus-Damage investigation

In this tutorial, the Simulation sandstone cutting by using a rigid tool in Abaqus-Damage investigation – has been studied. The stone part is modeled as a three-dimensional solid part. The tool is imported to the Abaqus as a deformable part, but in the interaction section, the rigid constraint has been ...

ادامه نوشته »

شبیه سازی برش سنگ (سنگ ماسه ای)در نرم افزار آباکوس توسط جسم برنده صلب

در این ویدئوی آموزشی به شبیه سازی برش سنگ (سنگ ماسه ای)در نرم افزار آباکوس توسط جسم برنده صلب پرداخته ایم. مدلسازی به صورت سه بعدی می باشد که شامل دو هندسه سنگ ماسه ای به صورت سه بعدی و تغییر شکلپذیر و جسم صلب برنده که به صورت سه ...

ادامه نوشته »

Simulation concrete beam-column joint under cyclic loading in Abaqus-Damage analysis

In this tutorial, the Simulation concrete beam-column joints under cyclic loading in Abaqus-Damage analysis- has been investigated. The concrete beam-column joint is modeled as a three-dimensional solid part. The strips and bars are modeled as three-dimensional wire parts. You can see figures of the assembled parts below The steel material ...

ادامه نوشته »

شبیه سازی بارگذاری تکراری روی اتصال تیر به ستون بتنی در آباکوس- بررسی آسیب

در این ویدئوی آموزشی به شبیه سازی بارگذاری تکراری روی اتصال تیر به ستون بتنی در نرم افزار آباکوس- بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده که در آن تیر بتنی به همراه ستون به صورت سه بعدی و تغییر شکل پذیر ترسیم شده است. میلگردها و ...

ادامه نوشته »

Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus

In this tutorial, the Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus has been investigated. Blast incidents in recent years showed that most of the terrorist attacks on public structures were explosions within short standoff distance. Reinforced concrete (RC) structures are widely used in civil engineering for ...

ادامه نوشته »

شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد به روش کوپل اویلری-لاگرانژی در آباکوس-بررسی تخریب بتن

در این ویدئو به شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس-بررسی تخریب بتن- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت تیر بتنی به صورت سالید و تغییر شکلپذیر، پارت خاموت و میلگرد طولی به صورت ...

ادامه نوشته »

Simulation air blast explosion over reinforced concrete column(ash and eggshell instead of cement partially) in Abaqus

In this tutorial, the Simulation air blast explosion over reinforced concrete column(ash and eggshell instead of cement partially) in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. You can see a figure of the ...

ادامه نوشته »

شبیه سازی انفجار روی یک ستون بتنی(حاوی مقدار جزئی خاکستر و پوسته تخم مرغ به جای سیمان) تقویت شده با میلگرد در آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار روی یک ستون بتنی(حاوی مقدار جزئی خاکستر و پوسته تخم مرغ به جای سیمان) تقویت شده با میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد. مجموعه شامل ستون بتنی به صورت سه بعدی و سالید، میلگردهای ...

ادامه نوشته »

Simulation pull-out process of medical screw from the bone in Abaqus- Damage investigation

In this tutorial, the Simulation pull-out process of the medical screw from the bone in Abaqus- Damage investigation- has been studied. This type of threaded fastener is primarily screwed into the bone without any tension in the screw or clamping force in the bone. Applications include neck and spine injuries, ...

ادامه نوشته »

شبیه سازی دینامیکی بیرون کشیدن پیچ از استخوان در نرم افزار آباکوس-بررسی آسیب

در این ویدئوی آموزشی به شبیه سازی دینامیکی بیرون کشیدن پیچ از استخوان در نرم افزار آباکوس-بررسی آسیب- پرداخته ایم.  مدلسازی به صورت سه بعدی بوده که شامل دو هندسه می باشد. هندسه استخوان که به صورت سه بعدی و تغییر شکلپذیر و همچنین هندسه پیچ به صورت سه بعدی ...

ادامه نوشته »

Simulation ice breaking by using brittle damage criterion in Abaqus

In this tutorial, the Simulation ice-breaking by using brittle damage criterion in Abaqus has been investigated. The ice part is modeled as a three-dimensional solid part and the steel part as a rough body is modeled as a three-dimensional solid part. You can see a figure of the assembled parts ...

ادامه نوشته »

شبیه سازی شکسته شدن یخ تحت اثر برخورد جسم فولادی در نرم افزار آباکوس-استفاده از معیار آسیب

در این ویدئوی آموزشی به شبیه سازی شکسته شدن یخ تحت اثر برخورد جسم فولادی در نرم افزار آباکوس-استفاده از معیار آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی می باشد که در آن دو پارت یخ و جسم فولادی به صورت تغییر شکلپذیر ترسیم شده اند. در شکل زیر ...

ادامه نوشته »

Simulation cyclic loading of the steel beam-column structure and damage investigation in Abaqus

In this tutorial, the Simulation cyclic loading of the steel beam-column structure and damage investigation in Abaqus has been investigated. The beam is modeled as a three-dimensional shell part and two steel columns are modeled as three-dimensional shell part. You can see a figure of the assembled parts below To ...

ادامه نوشته »

شبیه سازی بارگذاری چرخه ای در اتصال تیر به دو ستون فولادی و بررسی پارامتر آسیب در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی بارگذاری چرخه ای در اتصال تیر به دو ستون فولادی و بررسی پارامتر آسیب در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل سه هندسه بوده که پارت تیر فولادی به صورت شل و سه بعدی و پارت ستون نیز به صورت سه بعدی ...

ادامه نوشته »

Simulation internal explosion inside the aluminum pipe reinforced with epoxy glue and steel cover in Abaqus

In this tutorial, the Simulation internal explosion inside the aluminum pipe reinforced with epoxy glue and steel cover in Abaqus has been studied. The aluminum, epoxy, and steel cover are modeled as three-dimensional solid parts. You can see a figure of the assembled parts below The aluminum material is used ...

ادامه نوشته »

شبیه سازی انفجار داخل لوله آلمینیومی تقویت شده با چسب و روکش فولادی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار داخل لوله آلمینیومی تقویت شده با چسب و روکش فولادی در نرم افزار آباکوس پرداخته ایم. مدل شامل سه هندسه می باشد. لوله آلمینیومی داخل به صورت سه بعدی و سالید، لایه چسب به صورت سه بعدی و سالید و نهایتا پارت ...

ادامه نوشته »

Simulation composite plate connection with steel bolt under tension load in Abaqus

In this tutorial, the Simulation composite plate connection with steel bolt under tension load in Abaqus has been investigated. The two composite plates are modeled as three-dimensional solid parts. The steel bolt is modeled as a three-dimensional solid part. Because of the symmetry, half of the model is used to ...

ادامه نوشته »

شبیه سازی اتصال ورق کامپوزیتی با پیچ فولادی تحت بار کششی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی اتصال ورق کامپوزیتی با پیچ فولادی تحت بار کششی در نرم افزار آباکوس پرداخته ایم. مدل شامل سه هندسه بوده که به صورت سه بعدی و تغییر شکلپذیر ترسیم شده اند. دو ورق کامپوزیتی در بالا و پایین و یک پیچ فولادی در ...

ادامه نوشته »

Simulation elliptical ultra-high-performance concrete-filled steel tabular column under compression load in Abaqus

In this tutorial, the simulation elliptical ultra-high-performance concrete-filled steel tabular column under compression load in Abaqus has been investigated. Elliptical concrete-filled steel tubular (CFST) columns have recently attracted significant attention because of their increased strength and stiffness compared with empty elliptical hollow sections. The UHPC core is modeled as a ...

ادامه نوشته »

شبیه سازی تست فشار محوری ستون بیضی شکل مرکب(بتن فوق توانمند با روکش فولادی) در آباکوس

در این ویدئوی آموزشی به شبیه سازی تست فشار محوری ستون بیضی شکل مرکب(بتن فوق توانمند با روکش فولادی) در نرم افزار آباکوس پرداخته ایم. هسته بتنی بیضی شکل به صورت پارت سالید سه بعدی، روکش فلزی به صورت پارت شل سه بعدی تغییر شکلپذیر و در نهایت اجسام صلب ...

ادامه نوشته »

Numerical simulation of four points bending of reinforced foamed concrete beam containing partial cement replacement

In this tutorial, the numerical simulation of a reinforced foamed concrete beam containing partial cement replacement has been investigated. Construction materials using concrete is the primary building element of structures worldwide at present. The application of concrete in civil engineering is vast ranging from construction of bridges, dams to roads ...

ادامه نوشته »

شبیه سازی خمش چهار نقطه ای تیر بتنی(حاوی ذرات جزئی جایگزین سیمان) تقویت شده در آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش چهار نقطه ای تیر بتنی(حاوی ذرات جزئی جایگزین سیمان) تقویت شده در  نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بود و تیر بتنی به صورت تغییر شکلپذیر و سالید، میلگردها و خاموت ها به صورت پارت وایر سه بعدی، ...

ادامه نوشته »

Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus

In this tutorial, the Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus is investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The steel plate is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. You can see figures ...

ادامه نوشته »

شبیه سازی انفجار در هوا روی یک پنل فولادی-بتن فوق توانمند الیافی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار در هوا روی یک پنل فولادی-بتن فوق توانمند الیافی در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل سه هندسه می باشد. دال بتنی فوق توانمند الیافی به صورت سه بعدی و تغییر شکلپذیر، ورق فولادی محافظ به صورت سه بعدی و تغییر ...

ادامه نوشته »

Simulation friction stir welding of acrylonitrile butadiene styrene polymer in Abaqus

In this tutorial, the Simulation friction stir welding of acrylonitrile butadiene styrene polymer in Abaqus has been investigated. Polymer materials have seen its growth in leaps and bounds setting its foot in almost all manufacturing industries due to their excellent strength-to-weight ratio with enhanced toughness and low cost. Polymer joints ...

ادامه نوشته »

شبیه سازی جوش اصطکاکی پلیمر ABS به روش اویلری در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی جوش اصطکاکی پلیمر ABS به روش اویلری در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل دو پارت سه بعدی می باشد. قطعه پلیمری یا پلاستیکی به صورت یک پارت اویلری سه بعدی طراحی شده که این پارت برای اختصاص متریال ABS به دو ...

ادامه نوشته »

Simulation steel projectile impact on the Acrylonitrile butadiene styrene(ABS) plate in Abaqus

In this tutorial, the Simulation steel projectile impact on the Acrylonitrile butadiene styrene(ABS) plate in Abaqus has been investigated. Polymers are often used in applications where impact resistance is required. In this context, specific polymers such as  ABS (acrylonitrile butadiene styrene) have been created with rubber particles in order to ...

ادامه نوشته »

شبیه سازی برخورد پرتابه فولادی به ورق پلاستیکی(ABS) در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد پرتابه فولادی به ورق پلاستیکی(ABS) در نرم فزار آباکوس پرداخته ایم. مدلسازی شامل دو هندسه می باشد. پرتابه فولادی به صورت سه بعدی و شل و جسم هدف پلاستیکی به صورت پارت سالید و سه بعدی طراحی شده است. در شکل زیر ...

ادامه نوشته »

Simulation three points bending of High Strength Concrete(HSC) beam in Abaqus

In this tutorial, the Simulation three points bending of High Strength Concrete(HSC) beam in Abaqus has been studied. The primary difference between high-strength concrete and normal-strength concrete relates to the compressive strength that refers to the maximum resistance of a concrete sample to applied pressure. Although there is no precise ...

ادامه نوشته »

شبیه سازی خمش سه نقطه ای تیر بتنی با مقاومت بالا(HSC) تقویت شده با میلگرد در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش سه نقطه ای تیر بتنی با مقاومت بالا(HSC) تقویت شده با میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که در آن تیر بتنی به صورت جسم تغییر شکلپذیر و سالید طراحی شده است. میلگردهای طولی نیز ...

ادامه نوشته »

Simulation four points bending of Ultra High Performance Concrete beam with steel beam core in Abaqus

In this tutorial, the Simulation four points bending of Ultra High Performance Concrete beam with steel beam core in Abaqus has been done. UHPC possesses a compressive strength greater than 21.7 ksi (150 Mpa) and a flexural strength greater than 0.72 ksi (10 Mpa) at 28 days. The concept of ...

ادامه نوشته »

شبیه سازی خمش چهار نقطه ای تیر بتنی فوق توانمند با هسته تیر فولادی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش چهار نقطه ای تیر بتنی فوق توانمند با هسته تیر فولادی در نرم افزار آباکوس پرداخته ایم. مدل شامل چندین هسته از قبیل تیر بتنی به صورت سه بعدی و سالید، تیر فولادی به صورت سه بعدی و سالید که در مرکز ...

ادامه نوشته »

Simulation RC column with ultra high performance fiber reinforced concrete under compression load in Abaqus

In this tutorial, the Simulation RC column with ultra-high performance fiber reinforced concrete under a compression load in Abaqus has been investigated. The next generation of concrete, Ultra-High Performance Fibre Reinforced Concrete (UHP-FRC), exhibits exceptional mechanical characteristics. UHP-FRC has a compressive strength exceeding 150 MPa, tensile strength in the range ...

ادامه نوشته »

شبیه سازی تست فشار ستون بتنی فوق توانمند الیافی تقویت شده با میلگرد در نرم افزار آباکوس-بررسی آسیب

در این ویدئوی آموزشی به شبیه سازی تست فشار ستون بتنی فوق توانمند الیافی تقویت شده با میلگرد در نرم افزار آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت ستون بتنی به صورت سالید ترسیم شده است. میلگردها و خاموت ها نیز به صورت پارت وایر ...

ادامه نوشته »

Simulation rigid impact on the ultra-high performance fiber reinforced concrete slab in Abaqus

In this tutorial, the Simulation rigid impact on the ultra-high performance fiber reinforced concrete slab in Abaqus has been investigated. UHP-FRC is a new class of concrete that has been developed to give a significantly higher material performance in comparison to its concrete counterparts. UHP-FRC exhibits superior mechanical characteristics, including ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به پنل بتنی فوق توانمند الیافی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد جسم صلب به پنل بتنی فوق توانمند الیافی در نرم افزار آباکوس پرداخته ایم. مدل سازی به صورت سه بعدی می باشد که پارت بتن الیافی فوق توانمند به صورت سالید و تغییر شکلپذیر ترسیم شده است. میلگردهای مدفون شده در بتن ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo