تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / اسلاید (صفحه 6)

اسلاید

Simulation damage of reinforced concrete slab subjected to underwater explosion by using CEL method in Abaqus

In this tutorial, the Simulation damage of reinforced concrete slab subjected to underwater explosion by using CEL method in Abaqus  has been studied. The Eulerian part contains TNT, air, and water is modeled as a three-dimensional Eulerian part. The concrete slab is modeled as a three-dimensional solid part. The steel ...

ادامه نوشته »

شبیه سازی انفجار زیر آب به روش CEL در نزدیکی یک دال بتنی تقویت شده در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب به روش CEL در نزدیکی یک دال بتنی تقویت شده در نرم افزار آباکوس پرداخته ایم. دال بتنی به صورت سه بعدی و سالید، میلگردها به صورت سه بعدی و سیمی و پارت محیط انفجار نیز به صورت سه بعدی ...

ادامه نوشته »

Simulation compression test of an encased steel-UHPC composite column using Abaqus

In this tutorial, the Simulation compression test of an encased steel-UHPC composite column using Abaqus has been done. The UHPC column is modeled as a three-dimensional solid part. The I shape steel column is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire ...

ادامه نوشته »

شبیه سازی تست فشار ستون بتنی فوق توانمند تقویت شده با میلگرد و ستون I شکل داخلی در آباکوس

در این ویدئوی آموزشی به شبیه سازی تست فشار ستون بتنی فوق توانمند تقویت شده با میلگرد و ستون I شکل داخلی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت بتن فوق توانمند به صورت سالید، پارت ستون فولادی داخلی به صورت سالید، ...

ادامه نوشته »

Simulation three-dimensional cold extrusion process of an aluminum rod in Abaqus

In this tutorial, the Simulation three-dimensional cold extrusion process of an aluminum rod in Abaqus has been done. The aluminum rod and die are modeled as three-dimensional solid part. You can see a figure of the assembled parts below The aluminum material is considered as a elastic material with plastic ...

ادامه نوشته »

شبیه سازی سه بعدی اکستروژن سرد میله آلمینیومی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی سه بعدی اکستروژن سرد میله آلمینیومی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد. میله آلمینیومی و قالب هر دو به صورت سه بعدی و تغییر شکلپذیر ترسیم شده اند. قالب در محیط اینترکشن به صورت صلب در ...

ادامه نوشته »

Simulation rigid ball impact on the steel pipe with and without the CFRP reinforcement layers in Abaqus

In this tutorial, the Simulation rigid ball impact on the steel pipe with and without the CFRP reinfocement layers in Abaqus  has been investigated. The steel pipe is modeled as a three-dimensional shell part. The CFRP pipe is modeled as three-dimensional shell part and conventional shell section with eight layers ...

ادامه نوشته »

شبیه سازی برخورد پرتابه به لوله فولادی با و بدون لایه محافظ CFRP در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد پرتابه به لوله فولادی با و بدون لایه محافظ CFRP در نرم افزار آباکوس پرداخته ایم. هدف از این تحلیل بررسی افزودن لایه محافظ و تاثیر آن در کاهش کرنش پلاستیک و تغییر شکل لوله فولادی می باشد. در این آنالیز از ...

ادامه نوشته »

Simulation the pullout behavior of a single steel fiber using cohesive surface modeling in Abaqus

In this tutorial, the Simulation the pullout behavior of a single steel fiber using cohesive surface modeling in Abaqus has been studied. The concrete is modeled as a axisymmetric deformable part. The concrete is modeled as a axisymmetric part. Geometry is often drawn in 3D, also when it is axisymmetric. ...

ادامه نوشته »

شبیه سازی بیرون کشیدن الیاف فولاد از بتن به روش تماس سطوح چسبنده به صورت تقارنی در آباکوس

در این ویدئوی آموزشی به شبیه سازی بیرون کشیدن الیاف فولاد از بتن به روش تماس سطوح چسبنده به صورت تقارنی در  نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت تقارن محوری بوده و شامل دو پارت بتن و الیاف فولاد می باشد. البته در این مثال می توان از ...

ادامه نوشته »

Simulation cutting process of the silicon carbide(ceramic) material by using a rigid body in Abaqus

In this tutorial, the Simulation cutting process of the silicon carbide(ceramic) material by using a rigid body in Abaqus has been investigated. The silicon carbide is modeled as a three-dimensional solid part. The cutting tool is modeled as a three-dimensional solid part. You can see a figure of the assembled ...

ادامه نوشته »

شبیه سازی براده برداری از یک قطعه سرامیکی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی براده برداری از یک قطعه سرامیکی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و  قطعه سرامیکی به صورت سه بعدی و سالید مدل شده است. قطعه ابزار نیز به صورت سه بعدی و سالید ایجاد شده است. به ...

ادامه نوشته »

Simulation internal explosion by using SPH method in Abaqus

In this tutorial, the Simulation internal explosion by using SPH method in Abaqus has been investigated. The outer part is modeled as a three-dimensional solid part and the explosive part is modeled as a three-dimensional solid part. The TNT is placed inside the the outer shell part and during the ...

ادامه نوشته »

شبیه سازی انفجار داخلی به روش اس پی اچ در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار داخلی به روش اس پی اچ در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه می باشد و شامل دو هندسه پوسته خارجی به صورت سالید و کروی، پارت ماده منفجره به صورت سالید و سه بعدی می باشد.ماده منفجره در ...

ادامه نوشته »

Simulation three point bending of a RC beam reinforced with CFRP in Abaqus

In this tutorial, the Simulation three point bending of a RC beam reinforced with CFRP in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire parts. The CFRP sheet is modeled as a three-dimensional shell ...

ادامه نوشته »

شبیه سازی دینامیکی و استاتیکی خمش سه محوره تیر بتنی تقویت شده با میلگرد و ورق های CFRP در آباکوس

در این ویدئوی آموزشی به شبیه سازی دینامیکی و استاتیکی خمش سه محوره تیر بتنی تقویت شده با میلگرد و ورق های CFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل تیر بتنی به صورت سالید، میلگرد و خاموت ها به صورت وایر یا ...

ادامه نوشته »

Simulation cyclic loading over an Ultra-High-Performance-Fiber-Reinforcement Concrete column in Abaqus

In this tutorial, the Simulation cyclic loading over a Ultra-High-Performance-Fiber-Reinforcement Concrete column in Abaqus  has been studied. The UHPFRC column is modeled as a three-dimensional solid part. You can see a figure of the assembled part below Ultra-high performance fiber reinforced concrete (UHPFRC) is a special type of concrete produced ...

ادامه نوشته »

شبیه سازی بارگذاری سیکلی روی یک ستون بتنی فوق توانمند الیافی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی بارگذاری سیکلی روی یک ستون بتنی فوق توانمند الیافی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد و و در این مساله از یک پارت سه بعدی و سالید با ابعاد مشخص به عنوان ستون بتنی استفاده شده ...

ادامه نوشته »

Simulation four point bending of the UHPFRC beam in Abaqus

In this tutorial, the Simulation four point bending of the UHPFRC beam in Abaqus has been done. The UHPFRC beam is modeled as a three-dimensional solid part. Steel bars and strips are modeled as three-dimensional wire part. Two rigid bodies are used as hydraulic jack to apply the displacement on ...

ادامه نوشته »

شبیه سازی خمش چهار محوره تیر بتنی فوق توانمند الیافی در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش چهار محوره تیر بتنی فوق توانمند الیافی در نرم افزار آباکوس پرداخته ایم.  مدلسازی شامل پارت تیر بتنی فوق توانمند الیافی به صورت سه بعدی و سالید، میلگرده ها و خاموت ها به صورت سه بعدی و سیمی و دو جسم صلب ...

ادامه نوشته »

Simulation Behavior of Beam-Column Joints Strengthened With UHPFRC under axial load in Abaqus

In this tutorial, the Simulation Behavior of Beam-Column Joints Strengthened With UHPFRC under axial load in Abaqus has been investigated. The beam-column joint is modeled as three-dimensional solid part. The UHPFRC parts are modeled as three-dimensional solid as reinforcement. The strips and bars are modeled as three-dimensional wire parts. You ...

ادامه نوشته »

شبیه سازی اتصال تیر به ستون بتنی تقویت شده با بتن فوق توانمند الیافی تحت بار محوری در آباکوس

در این ویدئوی آموزشی به شبیه سازی اتصال تیر به ستون بتنی تقویت شده با بتن فوق توانمند الیافی تحت بار محوری در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت اتصال تیر به ستون به صورت سالید، پارت های سه بعدی مربوط به ...

ادامه نوشته »

Simulation four points bending of the reinforced rubberised concrete beam in Abaqus

In this tutorial, the Simulation four points bending of the reinforced Rubberised Concrete(RuC) beam in Abaqus has been investigated. The RuC beam in modeled as three-dimensional solid part. The steel bars and strips are modeled as three-dimensional solid parts. Two rigid bodies are modeled to apply load instead of hydraulic ...

ادامه نوشته »

شبیه سازی خمش چهار محوره تیر با متریال مخلوطی بتن و خرده لاستیک(rubberised concrete) در آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش چهار محوره تیر با متریال مخلوطی بتن و خرده لاستیک(rubberised concrete) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت تیر بتنی به صورت سالید، خاموت و میلگردهای طولی به صورت وایر و سه بعدی و ...

ادامه نوشته »

Simulation CEL explosion in the depth of soil near the concrete piled-raft structure in Abaqus

In this tutorial, the Simulation CEL explosion in the depth of soil near the concrete pilled-raft structure in Abaqus  has been studied. The domain is modeled as three-dimensional Eulerian part. The concrete pilled-raft is modeled as three-dimensional solid part. The air, TNT, and soil are modeled as three-dimensional solid parts. ...

ادامه نوشته »

شبیه سازی انفجار در عمق زمین در نزدیکی دسته شمع بتنی به روش CEL در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه انفجار در عمق زمین در نزدیکی دسته شمع بتنی به روش CEL در نرم افزار آباکوس پرداخته ایم. دامنه تحلیل و شبیه سازی به صورت یک پارت اویلری سه بعدی طراحی شده است. دسته شمع به صورت سه بعدی و سالید ایجاد شده اند. ...

ادامه نوشته »

Simulation Non-Newtonian blood flow behavior in Abaqus CFD

In this tutorial, the Simulation Non-Newtonian blood flow behavior in Abaqus CFD has been investigated. The blood solid part can be created in Abaqus or it can be imported as a CAD part to the Abaqus CFD. The blood part has one inlet flow and outlets zone that you can ...

ادامه نوشته »

شبیه سازی جریان خون به صورت سیال غیر نیوتنی در آباکوس سی اف دی

در این ویدئوی آموزشی به شبیه سازی جریان خون به صورت سیال غیر نیوتنی در آباکوس سی اف دی پرداخته ایم. مدل رگ یا همان مسیر جریان خون به صورت سه بعدی بوده و دارای یک ورودی و دو خروجی می باشد. پارت مورد نظر قابل ترسیم و یا ایمپورت ...

ادامه نوشته »

Simulation Ultra High Performance Concrete beam-column joint under cyclic loading in Abaqus

In this tutorial, the Simulation Ultra High Performance Concrete beam-column joint under cyclic loading in Abaqus has been investigated. The UHPC beam-column joint is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire part. You can see a figure of the assembled parts ...

ادامه نوشته »

شبیه سازی اتصال تیر به ستون بتنی فوق توانمند تحت بارگذاری چرخه ای در نرم افزار آباکوس

در این ویدئو به شبیه سازی اتصال تیر به ستون بتنی فوق توانمند تحت بارگذاری چرخه ای در نرم افزار  آباکوسرداخته ایم. مدل سازی شامل اتصال تیر به ستون به صورت سه بعدی و سالید، خاموت های مربوط به تیر و ستون به صورت سه بعدی و سیمی و میلگردهای ...

ادامه نوشته »

Simulation dynamic compression test of a concrete column reinforced with CFRP bars in Abaqus

In this tutorial, the Simulation dynamic compression test of a concrete column reinforced with CFRP bars in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The CFRP bar is modeled as a three-dimensional solid part and two rigid bodies as supporter and hydraulic jack ...

ادامه نوشته »

شبیه سازی تست فشار دینامیکی ستون بتنی تقویت شده با میلگرد CFRP در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی تست فشار دینامیکی ستون بتنی تقویت شده با میلگرد CFRP در نرم افزار آباکوس پرداخته ایم. مدل شامل ستون بتنی به صورت یک پارت سالید و سه بعدی، میلگردهای CFRP به صورت سه بعدی و ورق های صلب در نقش جک هیدرولیک و ...

ادامه نوشته »

Dynamic bending simulation of a UHPC beam reinforced with GFRP bars in Abaqus

In this tutorial, the Dynamic bending simulation of a UHPC beam reinforced with GFRP bars in Abaqus has been investigated. The Uktra-High-Performance concrete  beam is modeled as a three-dimensional solid part. The cohesive layer as an interface between UHPC and GFRP bar is modeled as a three-dimensional solid part. The ...

ادامه نوشته »

شبیه سازی خمش دینامیکی تیر بتنی فوق توانمند تقویت شده با میلگرد GFRP در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی خمش تیر بتنی فوق توانمند تقویت شده با میلگرد GFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل یک پارت سه بعدی و سالید بتنی، یک پارت سه بعدی و سالید GFRP ، یک پارت سالید و سه بعدی به عنوان لایه چسبنده ...

ادامه نوشته »

Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus

In this tutorial, the Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus has been investigated. The two ceramic layers are modeled as three-dimensional solid part. The aluminum foam as a middle part is modeled as a three-dimensional solid part. You can see a figure of ...

ادامه نوشته »

شبیه سازی انفجار متوالی روی یک پنل کامپوزیتی( سرامیک-فوم آلمینیومی) در نرم افزار آباکوس

در این ویدئو به شبیه سازی انفجار متوالی روی یک پنل کامپوزیتی( سرامیک-فوم آلمینیومی) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو لایه سرامیک به صورت سالید و یک لایه فوم آلمینیومی ضخیم در میان آنها به صورت سالید می باشد. در این ...

ادامه نوشته »

Simulation fire condition over an RC beam(concrete+bar) in Abaqus-Thermal analysis

In this tutorial, the Simulation fire condition over a RC beam(concrete+bar) in Abaqus-Thermal analysis- has been studied. The concrete beam is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional solid parts. To consider heat transfer in the steel bars, using the solid part and element ...

ادامه نوشته »

شبیه سازی فرآیند آتش سوزی روی یک تیر بتنی مسلح به میلگرد در نرم افزار آباکوس- تحلیل حرارتی

در این ویدئوی آموزشی به شبیه سازی فرآیند آتش سوزی روی یک تیر بتنی مسلح به میلگرد در نرم افزار آباکوس- تحلیل حرارتی- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت تیر بتنی و میلگردها به صورت سالید طراحی شده اند. معمولا میلگردها به صورت پارت سیمی ایجاد ...

ادامه نوشته »

simulation air blast explosion over the composite panel(glass+PVB) in Abaqus

In this tutorial, the simulation air blast explosion over the composite panel(glass+PVB) in Abaqus has been investigated. Explosions in air create characteristic pressure-time signatures that propagate outwards. Upon impact of the pressure waves with annealed glass, sharp glass fragments are formed which can cause injuries. With blast loading threats, laminated ...

ادامه نوشته »

شبیه سازی انفجار در هوا روی یک پنل شیشه ای با لایه واسط PVB در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار در هوا روی یک پنل شیشه ای با لایه واسط PVB در نرم افزار آباکوس پرداخته ایم. هدف از این آنالیز بررسی نوع شکست شیشه و تغییر شکل لایه میانی می باشد. مدلسازی به صورت سه بعدی می باشد و مدل از ...

ادامه نوشته »

Simulation embankment construction with geocell on the saturate soil in Abaqus

In this tutorial, the Simulation embankment construction with geocell on the saturate soil in Abaqus has been investigated. The soil is modeled as a two-dimensional shell part and it was separated to zone as a dry and saturate. The embankment is modeled as a two-dimensional shell part and it was ...

ادامه نوشته »

شبیه سازی خاکریزگذاری متوالی روی خاک مرطوب به همراه ژئوسل در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی مرحله ای خاکریزگذاری روی خاک مرطوب به همراه ژئوسل در نرم افزار آباکوس پرداخته ایم. مدل سازی شامل پارت خاک دارای دو ناحیه خشک و مرطوب، پارت خاکریز سه لایه به صورت دو بعدی می باشد. ژئوسل ها نیز به صورت دوبعدی و ...

ادامه نوشته »

Simulation compression test of the UHPFRC column with internal CFRP box in Abaqus

In this tutorial, the Simulation compression test of the UHPFRC column with internal CFRP box in Abaqus has been investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The CFRP internal box is modeled as a three-dimensional shell part. Two rigid bodies are used as supporter and body ...

ادامه نوشته »

شبیه سازی تست فشار ستون بتنی فوق توانمند الیافی به همراه هسته کامپوزیتی CFRP در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی تست فشار ستون بتنی فوق توانمند الیافی به همراه هسته کامپوزیتی CFRP در نرم افزار آباکوس پرداخته ایم. مدل سازی به صورت سه بعدی بوده و ستون بتنی به صورت سالید و قوطی CFRP داخلی به صورت شل طراحی شده اند. از دو ...

ادامه نوشته »

Simulation static bending of the UHPC beam with CFRP pipe core in Abaqus

In this tutorial, the Simulation static bending of the UHPC beam with CFRP pipe core in Abaqus has been investigated. The concrete beam is modeled as three-dimensional solid part. The CFRP pipe core is modeled as a three-dimensional shell part. The rigid body part is used as a force body.You ...

ادامه نوشته »

شبیه سازی تست خمش تیر بتنی فوق توانمند با هسته لوله ای CFRP در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی تست خمش تیر بتنی فوق توانمند با هسته لوله ای CFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و  تیر بتنی به صورت سالید و هسته کامپوزیتی یا لوله CFRP به صورت شل طراحی شده اند. از یک ...

ادامه نوشته »

Simulation repetitive low velocity impact on the composite panel(three glass layers+two epoxy layers) in Abaqus

In this tutorial, the Simulation low velocity impact on the composite panel(three glass layers+two epoxy layers) in Abaqus  has been investigated. The three glass layers are modeled as three-dimensional solid parts. The two glue or epoxy layers are modeled as three-dimensional solid part. The rigid projectile and supporter are modeled ...

ادامه نوشته »

شبیه سازی برخورد پی در پی سرعت پایین جسم صلب به پنل سه لایه ی شیشه ای به همراه چسب در آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد پی در پی سرعت پایین جسم صلب به پنل سه لایه ی شیشه ای به همراه چسب در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل سه لایه شیشه به صورت سالید و تغییر شکلپذیر به همراه ...

ادامه نوشته »

Simulation SPH explosion inside the RC column with outer steel box cover in Abaqus

In this tutorial, the Simulation SPH explosion inside the RC column with outer steel box cover in Abaqus has been investigated. The concrete and TNT are modeled as three-dimensional solid parts. The steel box is modeled as a three-dimensional shell part. The steel bars and strips are modeled as three-dimensional ...

ادامه نوشته »

شبیه سازی انفجار به روش SPH داخل ستون بتنی تقویت شده با میلگرد و غلاف فلزی بیرونی در آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار به روش SPH داخل ستون بتنی تقویت شده با میلگرد و غلاف فلزی بیرونی در نرم افزار آباکوس  پرداخته ایم.مدلسازی به صرت سه بعدی بوده و شامل هندسه های ستون بتنی توخالی به صورت سه بعدی و سالید، ستون یا غلاف فلزی ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo