تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / اخبار تایپ شونده (صفحه 4)

اخبار تایپ شونده

شبیه سازی انفجاردر هوا در نزدیکی ستون بتنی فوق توانمند در آباکوس-بررسی آسیب

در این ویدئوی آموزشی به شبیه سازی انفجار در هوا روی یک ستون بتنی فوق توانمند تقویت شده با میلگرد در نرم افزار آباکوس-بررسی تخریب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و تیر بتنی به صورت یک پارت سالید و سه بعدی، میلگردها و خاموت ها به صورت ...

ادامه نوشته »

Simulation steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation

In this tutorial, the Simulation of steel projectile impact to the Reinforced-Ultra-High-Performance Concrete- Damage investigation has been investigated. The Ultra-High-Performance Concrete is modeled as the three-dimensional solid part, the embedded beam parts are modeled as a three-dimensional wire part, and finally, the steel projectile is modeled as a solid part. ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به پنل بتنی فوق توانمند در آباکوس- بررسی تخریب

در این ویدئوی آموزشی به شبیه سازی برخورد پرتابه سرعت بالا به پنل بتنی فوق توانمند در آباکوس- بررسی تخریب- پرداخته ایم. مدلسازی شامل دال بتنی فوق توانمند به صورت سه بعدی و تغییر شکلپذیر، دو لایه میلگرد به صورت سه بعدی و سیمی، و جسم ضربه زننده فولادی به ...

ادامه نوشته »

Abaqus full package, Four Hundred Thirty tutorials, All aspects of simulations and modeling

In the present package, all aspects of the simulations and modeling in Abaqus through four hundred-thirty separated tutorials are investigated. During this full package, you will learn everything and you will be a master in simulation. The package contains all our English tutorials on the website. You can check the ...

ادامه نوشته »

Abaqus Welding Package- A lecture contains Seventeen tutorials – More than Ten hours of simulation

In this full lecture through eighteen tutorials with more than ten hours duration time, all aspects of welding are investigated. Each tutorial contains cae, inp, step-by-step English video, Fortran code, and papers. The lecture includes some subjects like Friction Stir Welding(Aluminum plates, steel plates, copper plates with CEL, ALE, and ...

ادامه نوشته »

Abaqus Impact Package- A lecture contains Forty tutorials – More than Twenty hours of simulation

In this package, the high and low-velocity impacts are investigated through 40 step-by-step tutorials for more than 20 hours. Through those 40 separated simulations, all aspects of the impact and collision are studied. Each tutorial contains cae, inp, step-by-step English video, and papers, also some of them have codes. Impact ...

ادامه نوشته »

Abaqus Crack growth Package- A lecture contains 10 tutorials – More than five hours of simulation

In this lecture through ten step-by-step tutorials, many aspects of the crack growth like XFEMm H integral, and … in concrete, steel, dam, bone, and…are investigated. All the tutorials are explained from A to Z, each tutorial contains cae, inp, and step-by-step English video. All the tutorials in the package ...

ادامه نوشته »

پکیج جامع شبیه سازی ترک در آباکوس-شامل ۱۵ مثال کاربردی با بیش از ۸۵ درصد تخفیف

در این پکیج آموزشی در قالب ۱۵ مثال کاربردی سعی گردیده شده است تا تمامی جوانب رشد ترک به روش های مختلف تشرریح و توضیح داده شود. در هر مثال از پکیج رشد ترک در ماده خاصی به صورت سه بعدی و یا دوبعدی در نظر گرفته شده است. مثالهای ...

ادامه نوشته »

پکیج جامع شبیه سازی برخورد در آباکوس-شامل ۳۰ مثال کاربردی با بیش از ۸۵ درصد تخفیف

در این پکیج سعی شده که با توجه به مدل های مختلف موجود در پدیده برخورد سرعت بالا و پایین، مسائلی کاربردی و متونع گنجانده شود. مثالهای از قبیل برخورد تکراری، برخورد پرتابه به پنل بتنی و فولادی، برخورد به لایه های کامپوزیتی،سرامیکی، لوله های فولادی، گسیختگی در اثر ضربه، ...

ادامه نوشته »

پکیج جامع شبیه سازی انفجار در آباکوس-شامل ۳۷ مثال کاربردی با بیش از ۸۵ درصد تخفیف

در این پکیج سعی شده که با توجه به انواع مدل های موجود در پدیده انفجار از قبیل انفجار به روش کانوپ، اس پی اچ، آکوستیک و کوپل اویلری-لاگرانژی، مسائلی کاربردی گنجانده شود. از هر روش تعدادی مثال قدم به قدم از انفجار روی سازه ها از قبیل تیر، ستون، ...

ادامه نوشته »

پکیج جامع شبیه سازی مسائل بایومکانیک در آباکوس- ۱۳ مثال کاربردی با بیش از ۸۰ درصد تخفیف

در این پکیج آموزشی در قالب ۱۳ مثال قدم به قدم به شبیه سازی مسائل مختلف بایومکانیک در آباکوس پرداخته ایم. مسائلی از قبیل دندان، ایمپلنت،استخوان،خون،رگ، ترک… پرداخته ایم. این عناوین مسائل مهم و اساسی در رشته بایومکانیک می باشند. تمامی ۱۳ مثال موجود در این پکیج به صورت مرحله ...

ادامه نوشته »

پکیج جامع شبیه سازی سازه های فولادی در آباکوس-شامل تمامی مسائل فولاد با بیش از ۸۰ درصد تخفیف

در این پکیج آموزشی ۳۰ مثال از سازه های فولادی با بررسی پدیده های مختلف بررسی شده است. مسائلی از قبیل تیر، ستون، اتصال تیر به ستون، بارگذاری دینامیکی، بارگذاری سیکلی، پیچ، پارگی اتصالات پیچی،تیر لانه زنبوری، تیر و ستون تقویت شده با الیاف،ستون های پر شده با بتن،خمش، عرشه ...

ادامه نوشته »

پکیج جامع شبیه سازی جوش در آباکوس- ۱۹ مثال کاربردی با بیش از ۸۰ درصد تخفیف

در این پکیج آموزشی تمامی مسائل مربوط به جوشی ذوبی،مقاومتی و انفجاری موجود در سایت در قالب ۱۹ مثال جداگانه قرار داده شده است. مثال ها به صورت قدم به قدم بوده و تمامی انواع مهم جوش را مورد بررسی قرار داده است. تمامی مثالها به صورت تکی در سایت ...

ادامه نوشته »

پکیج شبیه سازی جامع مسائل سازه ای انواع بتن در آباکوس- ۳۵ مثال کاربردی با بیش از ۸۵ درصد تخفیف

در این پکیج سعی بر این بوده که مسائل مختلفی مربوط به تحلیل های سازه ای بتن( انواع بتن) گنجانده شود. مسائلی مربوط به تیر،ستون، اتصالات، بارگذاری تکراری، برخورد تکراری،بتن فوق توانمند و الیافی، مسائل مربوط به آسیب، تیرو ستون های کامپوزیت،…در این پکیج در قالب فایل آموزشی قرار داده ...

ادامه نوشته »

پکیج جامع شبیه سازی مسائل خاک در آباکوس،شامل تمامی مسائل مربوط به خاک،۸۰ درصد تخفیف

با توجه به گوناگونی مسائل مختلف خاک و نیاز به ایجاد آموزش های دقیق برای هر موضوع، ۲۷ مثال کامل و دقیق از مسائل خاک طی سالهای گذشته در سایت قرار داده شده است که منظور دسترسی همه افراد به تمامی مسائل، پکیج جامع شبیه سازی مسائل خاک در آباکوس ...

ادامه نوشته »

Simulation steel bullet impact to the armor panel(Ceramic- Aluminum Foam) in Abaqus

In this tutorial, the Simulation steel bullet impact to the armor panel(Ceramic- Aluminum Foam) in Abaqus has been investigated. The steel bullet is modeled as a three-dimensional solid part. The ceramic and aluminum foam are modeled as three-dimensional solid parts. Because of the symmetry conditions, one-quarter of the whole model ...

ادامه نوشته »

شبیه سازی برخورد گلوله فولادی به پنل مرکب سرامیک-فوم آلمینیوم در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد گلوله فولادی به پنل مرکب سرامیک-فوم آلمینیوم در نرم افزار آباکوس پرداخته ایم. هدف از این شبیه سازی بررسی تخریب هدف و گلوله در اثر سرعت بالای برخورد می باشد. گلوله فولادی به صورت سه بعدی و تغییر شکلپذیر، لایه رویی سرامیکی ...

ادامه نوشته »

Simulation rigid projectile impact to the ceramic-CFRP panel in Abaqus-Damage investigation

In this tutorial, the Simulation rigid projectile impact to the ceramic-CFRP panel in Abaqus-Damage investigation – has been done. The rigid projectile is modeled as a three-dimensional shell part. The ceramic is modeled as a three-dimensional thick solid part. The CFRP or carbon fiber is modeled as a three-dimensional shell ...

ادامه نوشته »

شبیه سازی برخورد صلب به یک پنل مرکب سرامیک-CFRP و بررسی تخریب در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد صلب به یک پنل مرکب سرامیک-CFRP و بررسی تخریب در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل پارت پرتابه صلب به صورت سه بعدی و شل، پارت هدف سرامیکی به صورت یک لایه ضخیم سه بعدی و سالید و در نهایت پارت ...

ادامه نوشته »

Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation

In this tutorial, the Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation – has been done. The explosive part, or the TNT is modeled as a three-dimensional solid part. The aluminum sheets are modeled as three-dimensional solid parts. The Aluminum Foam as a core is ...

ادامه نوشته »

شبیه سازی انفجار به روش SPH روی یک پنل مرکب( آلمینیوم- فوم آلمینیوم) و بررسی تخریب در آباکوس

در این ویدئوی آموزشی به شبیه سازی انفجار به روش SPH روی یک پنل مرکب( آلمینیوم- فوم آلمینیوم) و بررسی تخریب در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد. پارت ماده منفجره و یا TNT به صورت یک کره توپر و سالید در نظر گرفته ...

ادامه نوشته »

Simulation rigid impact to the composite panel(CFRP+TPU+AL) in Abaqus-Damage investigation

In this tutorial, the Simulation rigid impact to the composite panel(CFRP+TPU+AL) in Abaqus-Damage investigation – has been studied. The CFRP part is modeled as a shell part with eight layers. The Thermoplastic polyurethane is modeled as a three-dimensional solid part. The Aluminum part is modeled as a three-dimensional solid part. ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به پنل مرکب(CFRP+TPU+AL) و بررسی تخریب در آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد جسم صلب به پنل مرکب(CFRP+TPU+AL) و بررسی تخریب در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و صفحه کامپوزیتی الیاف کربن به صورت هشت لایه و شل مدل شده است. لایه میانی پلی اورتان یا Thermoplastic polyurethane به ...

ادامه نوشته »

Simulation RC beam under repeated impact of the rigid hammer in Abaqus

In this tutorial, the Simulation RC beam under the repeated impact of the rigid hammer in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The steel rebar and strips are modeled as three-dimensional wire parts. The rigid hammer is modeled as a three-dimensional rigid ...

ادامه نوشته »

شبیه سازی برخورد تکراری یک جسم صلب به تیر بتنی مسلح در نرم افزار آباکوس

در این ویدئوی آموزشی به شبیه سازی برخورد تکراری یک جسم صلب به تیر بتنی مسلح در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و تیر بتنی به صورت سالید، میلگرد و خاموت ها به صورت وایر، و جسم صلب به صورت شل و ریجید طراحی ...

ادامه نوشته »

Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus

In this tutorial, the Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus has been investigated. The aluminum sheets are modeled as three-dimensional solid parts. The TPU is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below. History presents evidence of the ...

ادامه نوشته »

شبیه سازی انفجار در هوا روی یک پنل کامپوزیتی سه لایه( آلومینیوم- پلی اورتان) در نرم افزار آباکوس

در این یدئوی آموزشی به شبیه سازی انفجار در هوا روی یک پنل کامپوزیتی سه لایه( آلومینیوم- پلی اورتان) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو لایه رویی و زیرین آلمینیومی به صورت سالید و یک لایه میانی ضخیم از Thermoplastic Polyurethane ...

ادامه نوشته »

Numerical analysis of tilted angle shear connectors in steel-concrete composite systems in Abaqus

In this tutorial, the Numerical analysis of tilted angle shear connectors in steel-concrete composite systems in Abaqus has been investigated. The concrete block is modeled as a three-dimensional solid part. The steel beam and steel angle connector are modeled as three-dimensional solid parts. Two rigid bodies are used as boundary ...

ادامه نوشته »

شبیه سازی نبشی اتصال دهنده برشی در سیستم بتنی-فولادی در آباکوس- تعیین ظرفیت باربری

در این ویدئوی آموزشی به شبیه سازی نبشی اتصال دهنده برشی در سیستم بتنی-فولادی در آباکوس- تعیین ظرفیت باربری- پرداخته ایم. مدلسازی شامل چند پارت از قبیل ستون فولادی به صورت سه بعدی و تغییر شکلپذیر، پارت بتنی به صورت سه بعدی و تغییر شکلپذیر، پارت نبشی زاویه دار به ...

ادامه نوشته »

Simulation compression test of the concrete column with and without steel reinforcement-Compression test

In this tutorial, the Simulation compression test of the concrete column with and without steel reinforcement-Compression test- has been investigated. The concrete column is modeled as a three-dimensional solid part. The steel reinforcements are modeled as wire parts and two rigid bodies as boundary zone and hydraulic jack. You can ...

ادامه نوشته »

شبیه سازی تست فشار ستون کوتاه بتنی با و بدون تقویت کننده فلزی در آباکوس-مقایسه باربری

در این ویدئوی آموزشی به شبیه سازی تست فشار ستون کوتاه بتنی با و بدون تقویت کننده فلزی در آباکوس-مقایسه باربری- پرادخته ایم. مدلسازی به صورت سه بعدی شامل هندسه ستون بتنی، میلگرد ها و اجسام صلب در نقش تکیه گاه و جسم وارد کننده نیرو می باشد. ستون بتنی ...

ادامه نوشته »

Simulation RC column retrofitted with CFRP and epoxy under compression load in Abaqus

In this tutorial, the Simulation RC column retrofitted with CFRP and epoxy under compression load in Abaqus has been done. The circular concrete column is modeled as a three-dimensional solid part. The sell strips and bars are modeled as three-dimensional wire parts. The CFRP is modeled as a conventional shell ...

ادامه نوشته »

Thermal and Structural Analysis of Exhaust Manifold in Abaqus

In this tutorial, the Thermal and Structural Analysis of Exhaust Manifold in Abaqus has been investigated. The manifold geometry is a complex one, so the geometry is imported to the Abaqus from SolidWorks software. You can see a figure of the manifold part below The exhaust manifold is a very ...

ادامه نوشته »

Damage and failure investigation of the CFRP composite military helmet under close blast explosion

In this tutorial, the damage and failure investigation of the CFRP composite military helmet under close blast explosion has been studied. The military helmet is a 3D shell part with eight different layers. The helmet part is imported to the Abaqus because of the part complexity. You can see a ...

ادامه نوشته »

Seismic behavior of RC exterior wide beam-column joints in Abaqus

In this tutorial, the Seismic behavior of RC exterior wide beam-column joints in Abaqus has been simulated. The concrete beam and column are modeled as three-dimensional solid parts. The steel bars and strips are modeled as three-dimensional wire parts. You can see a figure of the assembled parts below Reinforced ...

ادامه نوشته »

High-velocity impact on the RC panel- Paper validation

In this tutorial, the High-velocity impact of a bullet on the RC panel- Paper validation- is investigated. The dimensions are extracted from the paper. The concrete slab is modeled as a three-dimensional solid part. The steel reinforcements are modeled as three-dimensional wire parts. The bullet is modeled as a discrete ...

ادامه نوشته »

Abaqus Full Course of Steel Structure Modeling and Simulation- More than Eight hours Duration

In this course, you will learn all aspects of steel structure modeling and simulation in Abaqus. The lecture contains sixteen sections, in each section, the tutor has explained all thing from A to Z. Geomert modeling, material definition and equations, steps, interaction, load, mesh, and results. The dynamic bolt failure, ...

ادامه نوشته »

Abaqus Full Lecture of Soil modeling, pile group and piled raft, consolidation, bearing capacity, …more than ten hours simulation

In this full lecture, all aspects of soil modeling and simulation are represented. The lecture contains twenty titles about soil, saturated soil, TBM, earthquake, tunnel, embankment construction, geocell reinforced soil, geosynthetic-reinforced soil retaining wall, earthquake over a concrete tunnel, embankment, and excavation, soil consolidation in interaction with the concrete pile, ...

ادامه نوشته »

Abaqus full lecture-High and Low-Velocity Impact- More than ten hours of modeling and simulation

In this lecture, the High and Low-velocity impact phenomenon is investigated. The lecture duration is more than ten hours and during that, twenty different models are simulated based on the research paper as a reference for the material. We define the proper material model for each part for instance in ...

ادامه نوشته »

Abaqus Concrete Structures- Lecture contains all thing about concrete-More than ten hours of simulation

In this lecture through Twenty step by step tutorial, many aspects of the concrete structure like a beam, RC beam and column, normal concrete, UHPC, and UHPFRC concrete, composite beam, and column, cyclic loading over the RC beam and column, CFDST and CFST column, ECC beam-column joint, high strength concrete ...

ادامه نوشته »

Abaqus Bio-Mechanical full lecture- Seven Hours modeling and simulation contains twelve lectures

In this lecture, we explained twelve titles about Bio-Mechanical engineering. During the lecture, we explained each model from A to Z. First, schematic of the problem and then modeling and simulation In the first lecture, the pull-out process of the medical screws from the bone has been investigated. The material ...

ادامه نوشته »

Learning all aspects of CEL, SPH, Acoustic, and CONWEP explosion modeling in Abaqus- Fifteen Hours simulation

In this course, we explained the Coupled Eulerian-Lagrangian, Smooth Particle Hydrodynamic, Acoustic, and CONWEP blast procedure in detail during twenty-three separate tutorials which you can see their title below. We provide this course because some people use our tutorials to create courses on Udemy but if you ask them questions ...

ادامه نوشته »

Simulation cyclic loading of a composite Column(UHPC + Steel box) in Abaqus

In this tutorial, the Simulation cyclic loading of a composite Column(UHPC + Steel box) in Abaqus has been studied. The Ultra-High-Performance Concrete column is modeled as a three-dimensional solid part. The steel box cover is modeled as a three-dimensional shell part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation oblique high-velocity impact of an aluminum rod to the silicon-carbide target in Abaqus

In this tutorial, the Simulation oblique high-velocity impact of an aluminum rod to the silicon-carbide target in Abaqus has been investigated. The silicon-carbide target is modeled as a three-dimensional solid part. The aluminum projectile is modeled as a three-dimensional solid part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation cyclic loading behavior of a reinforced rubberized concrete column in Abaqus

In this tutorial, the Simulation cyclic loading behavior of a reinforced rubberized concrete column in Abaqus has been investigated. The rubberized concrete column is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire part. You can see a figure of the assembled parts ...

ادامه نوشته »

Simulation of low energy impact on the RC beam and residual displacement investigation in Abaqus

In this tutorial, the Simulation of low energy impact on the RC beam and residual displacement investigation in Abaqus has been done. The concrete beam is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire parts. The hammer is modeled as a rigid ...

ادامه نوشته »

شبیه سازی تیر بتنی مسلح تحت اثر ضربه کم انرژی در نرم افزار آباکوس-بررسی جابه جایی پسماند

در این مثال آموزشی به شبیه سازی تیر بتنی مسلح تحت اثر ضربه کم انرژی در نرم افزار آباکوس-بررسی جابه جایی پسماند- در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل تیر بتنی به صورت سالید، میلگردهای طولی و خاموت ها به صورت سه بعدی ...

ادامه نوشته »

Simulation of rigid body impact to the interior voided RC slab in Abaqus

In this tutorial, the Simulation of rigid body impact on the interior voided RC slab in Abaqus has been investigated. The RC voided slab is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. The rigid impactor is modeled as a three-dimensional shell part. ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به پنل بتنی حفره دار در نرم افزار آباکوس- بررسی تخریب

در این ویدئوی آموزشی به شبیه سازی برخورد جسم صلب به پنل بتنی حفره دار در نرم افزار آباکوس- بررسی تخریب- پرداخته ایم. مدلسازی شامل دال بتنی به صورت سه بعدی و تغییر شکلپذیر، میلگردها به صورت سه بعدی و سیمی و در نهایت جسم صلب به صورت سه بعدی ...

ادامه نوشته »

Simulation dynamic bending of RC beams strengthened with CFRP rods and Epoxy glue in Abaqus

In this tutorial, the Simulation dynamic bending of RC beams strengthened with CFRP rods and Epoxy glue in Abaqus has been done. The concrete beam is modeled as a three-dimensional solid part. The CFRP rod and epoxy glue are modeled as three-dimensional solid parts. The steel bars and strips are ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo