تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / 2018 / مارس

بایگانی ماهانه: مارس 2018

Simulation earthquake load over a tank contain water and investigate sloshing phenomenon in Abaqus

In this video simulation earthquake load over a tank contain water and investigate sloshing phenomenon in Abaqus has been done. The water and tank are modeled as three dimensional deoformable parts. Elastic plastic material for concrete tank and viscosity with Us-Up equation for water has been used. Earthquake load is ...

ادامه نوشته »

شبیه سازی اثر زلزله روی یک مخزن بتنی حاوی آب و بررسی اسلاشینگ در نرم افزار آباکوس

در این ویدئو به شبیه سازی اثر زلزله روی یک مخزن بتنی حاوی آب و بررسی پدیده اسلاشینگ در نرم افزار آباکوس پرداخته ایم. شبیه سازی شامل دو هندسه مخزن و آب بوده که هر دو به صورت سه بعدی و تغییر شکل پذیر تعریف شده اند. برای ماده بتن ...

ادامه نوشته »

Simulation impact welding process in Abaqus by using Lagrangian approach

Today, major innovations suggest the use of dissimilar material combination to meet new  design criteria such as mass light weighting, structural reinforcements, or other specific  fictionalization. The development of functional material combinations knows a growing  interest in several engineering fields. Solutions can however be limited by the capability of  the ...

ادامه نوشته »

شبیه سازی فرآنید جوش ضربه ای در آباکوس و بررسی ترم تنش(Impact Welding)

در این ویدئو به شبیه سازی فرآیند جوش ضربه ای یا Impact Welding در نرم افزار آباکوس پرداخته ایم. برای مدلسازی از حالت تقارن محوری برای هر دو قعطه استفاده شده است. متریال مورد استفاده در این آنالیز آلمینیوم بوده که برای آن از حالت پلاستیک جانسون کوک استفاده شده ...

ادامه نوشته »

Simulation soil impact to the metal plate in Abaqus by using SPH method

In this video soil impact to the metal plate in Abaqus by using SPH method has been simulated. The soil is modeled as three dimensional part with elastic–plastic behavior and smooth particle hydrodynamic formulation. Coulomb-Mohr plasticity is implanted for soil. To definite particle element edit input file capability has been ...

ادامه نوشته »

شبیه سازی برخورد توده خاک به صفحه فلزی در نرم افزار آباکوس به روش اس پی اچ

در این ویدئو به شبیه سازی قدم به قدم برخورد یک توده خاک به صفحه فلزی در نرم افزار آباکوس به روش اس پی اچ پرداخته ایم. برای مدلسازی خاک از فضای سه بعدی و برای متریال آن از خاصیت الاستیک و پلاستیک موهر-کلمب استفاده شده است. برای مدلسازی خاک ...

ادامه نوشته »

Simulation rigid body impact to concrete wall reinforced with composite plate by using SPH method in Abaqus

In this Tutorial Simulation rigid body impact to concrete wall reinforced with composite plate by using SPH method in Abaqus has been investigated. All parts are modeled as three dimensional and to definite concrete behavior CDP material model with SPH formulation has been used. Composite made of Epoxy-Glass layers modeled by ...

ادامه نوشته »

شبیه سازی برخورد جسم صلب به دیواره بتنی تقویت شده با کامپوزیت به روش SPH در آباکوس

در این ویدئو به شبیه سازی قدم به قدم برخورد یک جسم صلب به یک دیواره بتنی تقویت شده با یک صفحه کامپوزیتی چهارلایه در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و برای بتن از متریال مدل CDP استفاده و برای مشاهده بهتر شکست و ...

ادامه نوشته »

Dynamic analysis of liquid storage tank under blast using coupled Euler–Lagrange formulation in ABAQUS

A growing number of terror attacks all over the world have become a threat to the human civilization.In the last two decades, bomb blasts in crowded business areas, underground railway stations, and busy roads have taken numerous lives and destroyed properties in different parts of the world. However, blast response ...

ادامه نوشته »

شبیه سازی انفجار در هوا بر روی یک مخزن حاوی آب در آباکوس و بررسی پدیده اسلاشینگ

در این ویدئو به شبیه سازی مرحله به مرحله انفجار در هوا و تاثیر آن بر یک مخزن حاوی آب و بررسی پدیده اسلاشینگ مخزن در اثر شوک انفجار در نرم افزار آباکوس پرداخته ایم. برای مدلسازی از فضای سه بعدی استفاده و روش انفجار نیز به صورت انفجار در ...

ادامه نوشته »

Simulation water sloshing in the concrete tank under earthquake load in Abaqus

This video has presented Simulation water sloshing in the concrete tank under earthquake load in Abaqus.Concrete tank is modeled as three dimensional shell with elastic material and water as eulerian part with Us-Up equation . Explicit procedure is appropriate and fifty five second time period has been applied.To definite water initial ...

ادامه نوشته »

شبیه سازی مخزن حاوی آب تحت نگاشت زلزله در صفحه در نرم افزار آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله اسلاشینگ آب در یک مخزن بتنی که تحت تحریک از پایه قرار گرفته است،در نرم افزار آباکوس پرداخته ایم. شتاب در صفحه کف مخزن و به صورت افقی در مدت ۵۵ ثانیه اعمال شده و در این مدت مقداری از آب ...

ادامه نوشته »

Simulation and Analysis of Ballistic Impact in ABAQUS-Thermal analysis

Ballistic Impact is the study of behavior of ductile targets subjected to projectile impact. In this work, simulation and analysis is done by using Abaqus/Explicit.Ballistic impact is one of the special case of impact problems.In such problems, a high force is applied over a short  time period (called shock loading) when ...

ادامه نوشته »

شبیه سازی برخورد پرتابه سرعت بالا به صفحه فلزی در آباکوس-تحلیل حرارتی

در این ویدئو به شبیه سازی برخورد یک پرتابه سرعت بالا به یک صفحه فلزی با استفاده از تحلیل دینامیکی-حرارتی در آباکوس پرداخته ایم. هر دو پارت به صورت سه بعدی مدل شده و برای متریال آنها از استیل به همراه خواص پلاستیک و آسیب وابسته به دما استفاده شده ...

ادامه نوشته »

Simulation TBM modeling into the dry mix with saturate soil in Abaqus

This video has presented TBM(Tunneling) into dry mix with saturate soil in Abaqus step by step.The soil is modeled as three dimensional part with two separate zone to assign dry and saturate condition with Mohr-Coulomb plasticity. Liner is modeled as three dimensional shell with concrete material. This analysis contain some ...

ادامه نوشته »

شبیه سازی سه بعدی فرآیند تونل زنی TBM در نرم افزار آباکوس

در این ویدئو به شبیه سازی قدم به قدم فرآیند تونل زنی سه بعدی در نرم افزار آباکوس پرداخته ایم. برای خاک دو محدوده جداگانه که یکی خشک و دیگری مرطوب می باشد در نظر گرفته شده است و برای متریال آن از مدل الاستیک به همراه پلاستیسیته کلمب موهر ...

ادامه نوشته »

Assessment of damage to an underground box tunnel by a surface explosion in ABAQUS

Recently, external terrorist activities have become one of the most influential events on tunnel structure safety because of the absence of proper mechanisms to detect these events in time to take preventive action. The present simulation used ABAQUS software to investigate the  behaviour of an underground box frame tunnel caused ...

ادامه نوشته »

شبیه سازی انفجار در خاک به روش اویلری و تاثیر آن بر تونل بتنی در آباکوس

در این ویدئو به شبیه سازی قدم به قدم انفجار به روش اویلری لاگرانژی بر روی یک تونل بتنی مدفون در خاک در نرم افزار آباکوس پرداخته ایم. مدل از چندین پارت سه بعدی تشکیل شده که برای بتن با توجه به اثر انفجار و تغییر شکل های سریع از ...

ادامه نوشته »

Simulation high speed water jet impact to PMMA plate in ABAQUS

The usage of water jets has spread into numerous fields and for multifaceted purposes such as cleaning, cutting, and punching various materials. Because the impact occurs over an extremely short period, the target may deform elastically or plastically at high rates of strain. The dynamics of this process are complex ...

ادامه نوشته »

شبیه سازی اثر واتر جت روی پلی ملت متیل اکریلات(PMMA) در آباکوس

در این ویدئو به شبیه سازی اثر واترجت و ایجاد تنش پسماند بر روی یک قطعه از پلی ملت متیل اکریلات در نرم افزار آباکوس پرداخته ایم. برای مدلسازی از فضای سه بعدی استفاده شده است. برای ماده PMMA از حالت الاستیک و پلاستیک و برای آب نیز از معادلات ...

ادامه نوشته »

Impact Simulation against water-filled X65 steel pipes in ABAQUS

Offshore pipelines are frequently subjected to accidental impact loads, e.g. from anchors or trawl gear. A lot of parameters including the pipe geometry, material properties, pipeline content, impact velocity,etc.This video has presented Impact Simulation against water-filled X65 steel pipes in ABAQUS by using SPH(Smooth Particle Hydrodynami).Explicit procedure is appropriate for ...

ادامه نوشته »

شبیه سازی برخورد پرتابه به لوله پر از آب و بررسی خمش آن و بیرون زدگی آب در آباکوس

در این ویدئو به شبیه سازی مرحله به مرحله برخورد یک جسم فلزی به یک لوله پر از آب در نرم افزار آباکوس پرداخته ایم. لوله از جنس استیل و به صورت شل مدل گردیده شده است. برای تعیین رفتار آب نیز از معادلات حالت شک خطی و برای فرمولاسیون ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo