In this example we consider an analysis of the Koyna dam, which was subjected to an earthquake of magnitude 6.5 on the Richter scale on December 11, 1967. The example illustrates a typical application of the concrete damage base on traction separation laws. Dam is modeled as two dimensional part ...
ادامه نوشته »بایگانی ماهانه: آگوست 2018
شبیه سازی رشد ترک در سد بتنی کوینا در آباکوس تحت بار زلزله
در این ویدئو به شبیه سازی رشد ترک در سد بتنی کوینا در نرم افزار آباکوس تحت بار زلزله پرداخته ایم. در این مثال که نتایج آن در هلپ آباکوس برای شکست کششی موجود می باشد، از متریال مدل مناسب برای رشد فیزیکی ترک بهره برده شده است. مدل به صورت ...
ادامه نوشته »Perforation mechanics of aluminium protective plates subjected to impact by projectile in ABAQUS
This paper focuses on the mechanical behavior of aluminium alloy under impact loading. This study has been carried out numerical techniques.The impact-protective capacity of structural components has be-come a relevant requirement for the automotive and aerospace industries. Both energy absorption and crash worthiness concepts are essential for the development of new ...
ادامه نوشته »شبیه سازی برخورد پرتابه سرعت بالا به ورق آلومینیومی و بررسی آسیب آن در آباکوس
در این ویدئو به شبیه سازی برخورد پرتابه سرعت بالا به ورق آلومینیومی و بررسی آسیب آن در نرم افزار آباکوس پرداخته ایم. ورق به صورت سه بعدی بوده و برای آن از معیار پلاستیسیته و آسیب جانسون کوک استفاده شده است.پرتابه به صورت صلب در نظر گرفته شده است. در ...
ادامه نوشته »Simulation fluid structure interaction in ABAQUS
In this video Simulation fluid structure interaction in ABAQUS has done. The ABAQUS has this capability to perform FSI analysis and create a appropriate coupling between CFD and Standard analysis. In this example the effect of air velocity over the short column has been investigated. The air domain was crated in ...
ادامه نوشته »شبیه سازی سیال سازه در آباکوس
در این ویدئو به شبیه سازی برخورد جریان هوا با سرعت زیاد به یک استوانه الاستیک در فرمت شبیه سازی سیال سازه در آباکوس پرداخته ایم. امکان ایجاد تعامل بین سیال و سازه در آباکوس فراهم بوده و با میکس کردن محیط سی اف دی و استاندارد می توان نتایج همزمان ...
ادامه نوشته »Simulation three dimensional crack growth in concrete slab by using XFEM technique
In this video Simulation three dimensional crack growth in concrete slab by using XFEM technique in Abaqus software has been studied.Concrete part is modeled as three dimensional part with traction separation behavior which defined in material property. To model crack growth under static load XFEM procedure with planar crack has been ...
ادامه نوشته »Simulation and investigation springback phenomenon in deep drawing process
Springback is the geometric change made to a part at the end of the forming process when the part has been released from the forces of the forming tool. Upon completion of sheet metal forming, deep-drawn and stretch-drawn parts spring back and thereby affect the dimensional accuracy of a finished ...
ادامه نوشته »شبیه سازی پدیده برگشت فنری در آنالیز کشش عمیق ورق در آباکوس
برگشت فنری (spring back) یکی از پدیده های رایج در فرآیندهای شکل دهی به حساب می آید. این پدیده در مرحله باربرداری و آزاد شدن بخشی از کرنشهای الاستیک اتفاق می افتد. بنابراین ابتدا باید مرحله بارگذاری به صورت کامل انجام شود و پس از آن به منظور شبیه سازی پدیده ...
ادامه نوشته »Simulation composite three points bending in Abaqus
In this tutorial simulation composite three points bending in Abaqus has been done. Composite parts are modeled as three dimensional part with continuum shell element . Epoxy-Glass material with Hashin’s damage criterion to model composite behavior under bending load has been implanted.This simulation normally is done by static solver but in ...
ادامه نوشته »شبیه سازی خمش ورق کامپوزیتی دو لایه در نرم افزار آباکوس
در این ویدئو به شبیه سازی خمش ورق کامپوزیتی دو لایه در نرم افزار آباکوس پرداخته ایم. ورق ها به صورت سه بعدی بوده و از المان کانتینیوم شل برای ایجاد لایه در پارت استفاده شده است.هندسه مسئله از سه پارت صلب و دو پارت تغییر شکل پذیر تشکیل شده است.ماده ...
ادامه نوشته »Simulation air blast explosion over concrete column covered by steel plate in Abaqus
A growing number of terror attacks all over the world have become a threat to the human civilization.In the last two decades, bomb blasts in crowded business areas, underground railway stations, and busy roads have taken numerous lives and destroyed properties in different parts of the world. However, blast response ...
ادامه نوشته »شبیه سازی انفجار در نزدیکی ستون بتنی کاور شده با ورق فولادی در آباکوس
در این ویدئو به شبیه سازی مرحله به مرحله انفجار در نزدیکی ستون بتنی کاور شده با ورق فولادی در آباکوس پرداخته ایم. برای مدلسازی انفجار از روش انفجار در هوا یا همان روش کانوپ بهره برده شده است. مدلسازی به صورت سه بعدی بوده و ورق استیل به منظور ایجاد ...
ادامه نوشته »